X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/3d28d53c3e2ae529933283e63a8b05f2ab1ce2be..8e20e8697ff88d38ac01d62198dbdd552449e4aa:/Projects/USBtoSerial/USBtoSerial.c diff --git a/Projects/USBtoSerial/USBtoSerial.c b/Projects/USBtoSerial/USBtoSerial.c index 1b4cab289..194f6b084 100644 --- a/Projects/USBtoSerial/USBtoSerial.c +++ b/Projects/USBtoSerial/USBtoSerial.c @@ -1,198 +1,236 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2010. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the USBtoSerial project. This file contains the main tasks of - * the demo and is responsible for the initial application hardware configuration. - */ - -#include "USBtoSerial.h" - -/** Circular buffer to hold data from the host before it is sent to the device via the serial port. */ -RingBuff_t USBtoUSART_Buffer; - -/** Circular buffer to hold data from the serial port before it is sent to the host. */ -RingBuff_t USARTtoUSB_Buffer; - -/** LUFA CDC Class driver interface configuration and state information. This structure is - * passed to all CDC Class driver functions, so that multiple instances of the same class - * within a device can be differentiated from one another. - */ -USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = - { - .Config = - { - .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, - }, - }; - -/** Main program entry point. This routine contains the overall program flow, including initial - * setup of all components and the main program loop. - */ -int main(void) -{ - SetupHardware(); - - Buffer_Initialize(&USBtoUSART_Buffer); - Buffer_Initialize(&USARTtoUSB_Buffer); - - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); - sei(); - - for (;;) - { - /* Read bytes from the USB OUT endpoint into the USART transmit buffer */ - for (uint8_t DataBytesRem = CDC_Device_BytesReceived(&VirtualSerial_CDC_Interface); DataBytesRem != 0; DataBytesRem--) - { - if (!(BUFF_STATICSIZE - USBtoUSART_Buffer.Elements)) - break; - - Buffer_StoreElement(&USBtoUSART_Buffer, CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface)); - } - - /* Read bytes from the USART receive buffer into the USB IN endpoint */ - while (USARTtoUSB_Buffer.Elements) - CDC_Device_SendByte(&VirtualSerial_CDC_Interface, Buffer_GetElement(&USARTtoUSB_Buffer)); - - /* Load bytes from the USART transmit buffer into the USART */ - while (USBtoUSART_Buffer.Elements) - Serial_TxByte(Buffer_GetElement(&USBtoUSART_Buffer)); - - CDC_Device_USBTask(&VirtualSerial_CDC_Interface); - USB_USBTask(); - } -} - -/** Configures the board hardware and chip peripherals for the demo's functionality. */ -void SetupHardware(void) -{ - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); - - /* Hardware Initialization */ - Serial_Init(9600, false); - LEDs_Init(); - USB_Init(); -} - -/** Event handler for the library USB Connection event. */ -void EVENT_USB_Device_Connect(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); -} - -/** Event handler for the library USB Disconnection event. */ -void EVENT_USB_Device_Disconnect(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); -} - -/** Event handler for the library USB Configuration Changed event. */ -void EVENT_USB_Device_ConfigurationChanged(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_READY); - - if (!(CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface))) - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); -} - -/** Event handler for the library USB Unhandled Control Request event. */ -void EVENT_USB_Device_UnhandledControlRequest(void) -{ - CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface); -} - -/** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer - * for later transmission to the host. - */ -ISR(USART1_RX_vect, ISR_BLOCK) -{ - uint8_t ReceivedByte = UDR1; - - if (USB_DeviceState == DEVICE_STATE_Configured) - Buffer_StoreElement(&USARTtoUSB_Buffer, ReceivedByte); -} - -/** Event handler for the CDC Class driver Line Encoding Changed event. - * - * \param[in] CDCInterfaceInfo Pointer to the CDC class interface configuration structure being referenced - */ -void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) -{ - uint8_t ConfigMask = 0; - - switch (CDCInterfaceInfo->State.LineEncoding.ParityType) - { - case CDC_PARITY_Odd: - ConfigMask = ((1 << UPM11) | (1 << UPM10)); - break; - case CDC_PARITY_Even: - ConfigMask = (1 << UPM11); - break; - } - - if (CDCInterfaceInfo->State.LineEncoding.CharFormat == CDC_LINEENCODING_TwoStopBits) - ConfigMask |= (1 << USBS1); - - switch (CDCInterfaceInfo->State.LineEncoding.DataBits) - { - case 6: - ConfigMask |= (1 << UCSZ10); - break; - case 7: - ConfigMask |= (1 << UCSZ11); - break; - case 8: - ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10)); - break; - } - - UCSR1A = (1 << U2X1); - UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1)); - UCSR1C = ConfigMask; - UBRR1 = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS); -} +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the USBtoSerial project. This file contains the main tasks of + * the project and is responsible for the initial application hardware configuration. + */ + +#include "USBtoSerial.h" + +/** Circular buffer to hold data from the host before it is sent to the device via the serial port. */ +static RingBuffer_t USBtoUSART_Buffer; + +/** Underlying data buffer for \ref USBtoUSART_Buffer, where the stored bytes are located. */ +static uint8_t USBtoUSART_Buffer_Data[128]; + +/** Circular buffer to hold data from the serial port before it is sent to the host. */ +static RingBuffer_t USARTtoUSB_Buffer; + +/** Underlying data buffer for \ref USARTtoUSB_Buffer, where the stored bytes are located. */ +static uint8_t USARTtoUSB_Buffer_Data[128]; + +/** LUFA CDC Class driver interface configuration and state information. This structure is + * passed to all CDC Class driver functions, so that multiple instances of the same class + * within a device can be differentiated from one another. + */ +USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = + { + .Config = + { + .ControlInterfaceNumber = 0, + + .DataINEndpointNumber = CDC_TX_EPNUM, + .DataINEndpointSize = CDC_TXRX_EPSIZE, + .DataINEndpointDoubleBank = false, + + .DataOUTEndpointNumber = CDC_RX_EPNUM, + .DataOUTEndpointSize = CDC_TXRX_EPSIZE, + .DataOUTEndpointDoubleBank = false, + + .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, + .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, + .NotificationEndpointDoubleBank = false, + }, + }; + + +/** Main program entry point. This routine contains the overall program flow, including initial + * setup of all components and the main program loop. + */ +int main(void) +{ + SetupHardware(); + + RingBuffer_InitBuffer(&USBtoUSART_Buffer, USBtoUSART_Buffer_Data, sizeof(USBtoUSART_Buffer_Data)); + RingBuffer_InitBuffer(&USARTtoUSB_Buffer, USARTtoUSB_Buffer_Data, sizeof(USARTtoUSB_Buffer_Data)); + + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); + sei(); + + for (;;) + { + /* Only try to read in bytes from the CDC interface if the transmit buffer is not full */ + if (!(RingBuffer_IsFull(&USBtoUSART_Buffer))) + { + int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface); + + /* Read bytes from the USB OUT endpoint into the USART transmit buffer */ + if (!(ReceivedByte < 0)) + RingBuffer_Insert(&USBtoUSART_Buffer, ReceivedByte); + } + + /* Check if the UART receive buffer flush timer has expired or the buffer is nearly full */ + uint16_t BufferCount = RingBuffer_GetCount(&USARTtoUSB_Buffer); + if ((TIFR0 & (1 << TOV0)) || (BufferCount > (uint8_t)(sizeof(USARTtoUSB_Buffer_Data) * .75))) + { + /* Clear flush timer expiry flag */ + TIFR0 |= (1 << TOV0); + + /* Read bytes from the USART receive buffer into the USB IN endpoint */ + while (BufferCount--) + { + /* Try to send the next byte of data to the host, abort if there is an error without dequeuing */ + if (CDC_Device_SendByte(&VirtualSerial_CDC_Interface, + RingBuffer_Peek(&USARTtoUSB_Buffer)) != ENDPOINT_READYWAIT_NoError) + { + break; + } + + /* Dequeue the already sent byte from the buffer now we have confirmed that no transmission error occurred */ + RingBuffer_Remove(&USARTtoUSB_Buffer); + } + } + + /* Load the next byte from the USART transmit buffer into the USART */ + if (!(RingBuffer_IsEmpty(&USBtoUSART_Buffer))) + Serial_SendByte(RingBuffer_Remove(&USBtoUSART_Buffer)); + + CDC_Device_USBTask(&VirtualSerial_CDC_Interface); + USB_USBTask(); + } +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); + + /* Hardware Initialization */ + LEDs_Init(); + USB_Init(); + + /* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */ + TCCR0B = (1 << CS02); +} + +/** Event handler for the library USB Connection event. */ +void EVENT_USB_Device_Connect(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); +} + +/** Event handler for the library USB Disconnection event. */ +void EVENT_USB_Device_Disconnect(void) +{ + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); +} + +/** Event handler for the library USB Configuration Changed event. */ +void EVENT_USB_Device_ConfigurationChanged(void) +{ + bool ConfigSuccess = true; + + ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface); + + LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); +} + +/** Event handler for the library USB Control Request reception event. */ +void EVENT_USB_Device_ControlRequest(void) +{ + CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface); +} + +/** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer + * for later transmission to the host. + */ +ISR(USART1_RX_vect, ISR_BLOCK) +{ + uint8_t ReceivedByte = UDR1; + + if (USB_DeviceState == DEVICE_STATE_Configured) + RingBuffer_Insert(&USARTtoUSB_Buffer, ReceivedByte); +} + +/** Event handler for the CDC Class driver Line Encoding Changed event. + * + * \param[in] CDCInterfaceInfo Pointer to the CDC class interface configuration structure being referenced + */ +void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) +{ + uint8_t ConfigMask = 0; + + switch (CDCInterfaceInfo->State.LineEncoding.ParityType) + { + case CDC_PARITY_Odd: + ConfigMask = ((1 << UPM11) | (1 << UPM10)); + break; + case CDC_PARITY_Even: + ConfigMask = (1 << UPM11); + break; + } + + if (CDCInterfaceInfo->State.LineEncoding.CharFormat == CDC_LINEENCODING_TwoStopBits) + ConfigMask |= (1 << USBS1); + + switch (CDCInterfaceInfo->State.LineEncoding.DataBits) + { + case 6: + ConfigMask |= (1 << UCSZ10); + break; + case 7: + ConfigMask |= (1 << UCSZ11); + break; + case 8: + ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10)); + break; + } + + /* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */ + UCSR1B = 0; + UCSR1A = 0; + UCSR1C = 0; + + /* Set the new baud rate before configuring the USART */ + UBRR1 = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS); + + /* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */ + UCSR1C = ConfigMask; + UCSR1A = (1 << U2X1); + UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1)); +} +