X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/3a2c1db6751979ae3e5d7a6fa51026f9c44c71c0..f79f9abd28040d839b02ea22cdfde3d0a34f3482:/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
index a6a57670b..07dce5011 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
@@ -119,14 +119,14 @@ static void XPROGProtocol_EnterXPROGMode(void)
 	{
 		/* Enable PDI programming mode with the attached target */
 		XPROGTarget_EnableTargetPDI();
-		
+
 		/* Store the RESET key into the RESET PDI register to keep the XMEGA in reset */
 		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);	
 		XPROGTarget_SendByte(PDI_RESET_KEY);
 
-		/* Lower direction change guard time to 8 USART bits */
+		/* Lower direction change guard time to 0 USART bits */
 		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_CTRL_REG);	
-		XPROGTarget_SendByte(0x04);
+		XPROGTarget_SendByte(0x07);
 
 		/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
 		XPROGTarget_SendByte(PDI_CMD_KEY);	
@@ -141,9 +141,9 @@ static void XPROGProtocol_EnterXPROGMode(void)
 		/* Enable TPI programming mode with the attached target */
 		XPROGTarget_EnableTargetTPI();
 		
-		/* Lower direction change guard time to 8 USART bits */
+		/* Lower direction change guard time to 0 USART bits */
 		XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);
-		XPROGTarget_SendByte(0x04);
+		XPROGTarget_SendByte(0x07);
 		
 		/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
 		XPROGTarget_SendByte(TPI_CMD_SKEY);	
@@ -170,6 +170,8 @@ static void XPROGProtocol_LeaveXPROGMode(void)
 	
 	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
 	{
+		XMEGANVM_WaitWhileNVMBusBusy();
+
 		/* Clear the RESET key in the RESET PDI register to allow the XMEGA to run */
 		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);	
 		XPROGTarget_SendByte(0x00);
@@ -178,6 +180,8 @@ static void XPROGProtocol_LeaveXPROGMode(void)
 	}
 	else
 	{
+		TINYNVM_WaitWhileNVMBusBusy();
+
 		/* Clear the NVMEN bit in the TPI CONTROL register to disable TPI mode */
 		XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);	
 		XPROGTarget_SendByte(0x00);