X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/395e4287a1eacb617360c932beaf8aa0288ce8a6..0da99447d3e88e83f9977501bee56af5c7aa56c0:/LUFA/Drivers/Board/LEDs.h

diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index f6f9d82ff..21f89aa58 100644
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -63,7 +63,7 @@
  *
  *  \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
  *        a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
- *        If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D
+ *        If other behavior is desired, either alias the remaining LED masks to existing LED masks via the -D
  *        switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when
  *        a non-existing LED is referenced in application code. Note that this means that it is possible to make
  *        compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)
@@ -76,7 +76,7 @@
  *  \code
  *      // Initialize the board LED driver before first use
  *      LEDs_Init();
- *
+ *      
  *      // Turn on each of the four LEDs in turn
  *      LEDs_SetAllLEDs(LEDS_LED1);
  *      Delay_MS(500);
@@ -86,11 +86,11 @@
  *      Delay_MS(500);
  *      LEDs_SetAllLEDs(LEDS_LED4);
  *      Delay_MS(500);
- *
+ *      
  *      // Turn on all LEDs
  *      LEDs_SetAllLEDs(LEDS_ALL_LEDS);
  *      Delay_MS(1000);
- *
+ *      
  *      // Turn on LED 1, turn off LED 2, leaving LEDs 3 and 4 in their current state
  *      LEDs_ChangeLEDs((LEDS_LED1 | LEDS_LED2), LEDS_LED1);
  *  \endcode
@@ -221,7 +221,7 @@
 		 */
 		static inline void LEDs_Init(void);
 
-		/** Disables the board LED driver, releasing the I/O pins back to their default high-impedence input mode. */
+		/** Disables the board LED driver, releasing the I/O pins back to their default high-impedance input mode. */
 		static inline void LEDs_Disable(void);
 
 		/** Turns on the LEDs specified in the given LED mask.