X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/37b2130fb2767a39f3d95414c6aca75a67c26298..59becad82f18c158063ef450d65fefa332857e86:/Demos/Device/MIDI/MIDI.c

diff --git a/Demos/Device/MIDI/MIDI.c b/Demos/Device/MIDI/MIDI.c
index 7e1d21156..b6b43df6a 100644
--- a/Demos/Device/MIDI/MIDI.c
+++ b/Demos/Device/MIDI/MIDI.c
@@ -58,7 +58,7 @@ int main(void)
 	/* Hardware Initialization */
 	Joystick_Init();
 	LEDs_Init();
-	HWB_Init();
+	Buttons_Init();
 
 	/* Indicate USB not ready */
 	UpdateStatus(Status_USBNotReady);
@@ -74,7 +74,7 @@ int main(void)
 }
 
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
-EVENT_HANDLER(USB_Connect)
+void EVENT_USB_Connect(void)
 {
 	/* Start USB management task */
 	Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
@@ -86,7 +86,7 @@ EVENT_HANDLER(USB_Connect)
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
  *  the status LEDs, disables the sample update and PWM output timers and stops the USB and MIDI management tasks.
  */
-EVENT_HANDLER(USB_Disconnect)
+void EVENT_USB_Disconnect(void)
 {
 	/* Stop running audio and USB management tasks */
 	Scheduler_SetTaskMode(USB_MIDI_Task, TASK_STOP);
@@ -99,7 +99,7 @@ EVENT_HANDLER(USB_Disconnect)
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
  *  of the USB device after enumeration - the device endpoints are configured and the MIDI management task started.
  */
-EVENT_HANDLER(USB_ConfigurationChanged)
+void EVENT_USB_ConfigurationChanged(void)
 {
 	/* Setup MIDI stream endpoints */
 	Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPNUM, EP_TYPE_BULK,
@@ -134,8 +134,8 @@ TASK(USB_MIDI_Task)
 		uint8_t JoystickStatus  = Joystick_GetStatus();
 		uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus);
 		
-		/* Get HWB status - if set use channel 10 (percussion), otherwise use channel 1 */
-		uint8_t Channel = ((HWB_GetStatus()) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1));
+		/* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */
+		uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1));
 
 		if (JoystickChanges & JOY_LEFT)
 		  SendMIDINoteChange(0x3C, (JoystickStatus & JOY_LEFT), 0, Channel);