X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/3472af91a5c167cf243335fa32b5284a4a796e39..a459f10b0c1a3e02f160ff3a1a2a0b45ae5b69a7:/Demos/Device/LowLevel/AudioOutput/AudioOutput.c?ds=sidebyside

diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c
index c814c8ce5..1128e8f4e 100644
--- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c
+++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c
@@ -30,7 +30,7 @@
 
 /** \file
  *
- *  Main source file for the Audio Output demo. This file contains the main tasks of the demo and
+ *  Main source file for the AudioOutput demo. This file contains the main tasks of the demo and
  *  is responsible for the initial application hardware configuration.
  */
  
@@ -73,7 +73,7 @@ void SetupHardware(void)
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs, and
  *  configures the sample update and PWM timers.
  */
-void EVENT_USB_Connect(void)
+void EVENT_USB_Device_Connect(void)
 {
 	/* Indicate USB enumerating */
 	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
@@ -105,7 +105,7 @@ void EVENT_USB_Connect(void)
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
  *  the status LEDs, disables the sample update and PWM output timers and stops the USB and Audio management tasks.
  */
-void EVENT_USB_Disconnect(void)
+void EVENT_USB_Device_Disconnect(void)
 {
 	/* Stop the timers */
 	TCCR0B = 0;
@@ -134,7 +134,7 @@ void EVENT_USB_Disconnect(void)
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
  *  of the USB device after enumeration - the device endpoints are configured.
  */
-void EVENT_USB_ConfigurationChanged(void)
+void EVENT_USB_Device_ConfigurationChanged(void)
 {
 	/* Indicate USB connected and ready */
 	LEDs_SetAllLEDs(LEDMASK_USB_READY);
@@ -148,11 +148,11 @@ void EVENT_USB_ConfigurationChanged(void)
 	}
 }
 
-/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific
+/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific
  *  control requests that are not handled internally by the USB library (including the Audio class-specific
  *  requests) so that they can be handled appropriately for the application.
  */
-void EVENT_USB_UnhandledControlPacket(void)
+void EVENT_USB_Device_UnhandledControlRequest(void)
 {
 	/* Process General and Audio specific control requests */
 	switch (USB_ControlRequest.bRequest)
@@ -210,10 +210,11 @@ void USB_Audio_Task(void)
 		int8_t  LeftSample_8Bit   = (LeftSample_16Bit  >> 8);
 		int8_t  RightSample_8Bit  = (RightSample_16Bit >> 8);
 			
-#if !defined(AUDIO_OUT_STEREO)
 		/* Mix the two channels together to produce a mono, 8-bit sample */
 		int8_t  MixedSample_8Bit  = (((int16_t)LeftSample_8Bit + (int16_t)RightSample_8Bit) >> 1);
-#endif
+
+		/* Get absolute value of mixed sample value */
+		uint8_t MixedSample_8Bit_Abs = abs(MixedSample_8Bit);
 
 #if defined(AUDIO_OUT_MONO)
 		/* Load the sample into the PWM timer channel */
@@ -225,25 +226,22 @@ void USB_Audio_Task(void)
 #elif defined(AUDIO_OUT_PORTC)
 		/* Load the 8-bit mixed sample into PORTC */
 		PORTC = MixedSample_8Bit;
-#else
-		uint8_t LEDMask = LEDS_NO_LEDS;
+#endif
 
-		/* Make mixed sample value positive (absolute) */
-		MixedSample_8Bit = abs(MixedSample_8Bit);
+		uint8_t LEDMask = LEDS_NO_LEDS;
 
-		if (MixedSample_8Bit > ((128 / 8) * 1))
+		if (MixedSample_8Bit_Abs > 2)
 		  LEDMask |= LEDS_LED1;
 		  
-		if (MixedSample_8Bit > ((128 / 8) * 2))
+		if (MixedSample_8Bit_Abs > 4)
 		  LEDMask |= LEDS_LED2;
 		  
-		if (MixedSample_8Bit > ((128 / 8) * 3))
+		if (MixedSample_8Bit_Abs > 8)
 		  LEDMask |= LEDS_LED3;
 
-		if (MixedSample_8Bit > ((128 / 8) * 4))
+		if (MixedSample_8Bit_Abs > 16)
 		  LEDMask |= LEDS_LED4;
 		  
 		LEDs_SetAllLEDs(LEDMask);
-#endif
 	}
 }