X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/334f70aa80ecfa05a42c6006cb49d14f05555fa8..6eaefff39bbf024df03cee382d028e8e24361bae:/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h

diff --git a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
index 3fc681a28..750db0dc4 100644
--- a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2013.
+     Copyright (C) Dean Camera, 2019.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
-  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2019  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -40,7 +40,7 @@
 /** \ingroup Group_SPI
  *  \defgroup Group_SPI_AVR8 SPI Peripheral Driver (AVR8)
  *
- *  \section Sec_ModDescription Module Description
+ *  \section Sec_SPI_AVR8_ModDescription Module Description
  *  Driver for the hardware SPI port available on most 8-bit AVR microcontroller models. This
  *  module provides an easy to use driver for the setup and transfer of data over the
  *  AVR's SPI port.
@@ -48,7 +48,7 @@
  *  \note This file should not be included directly. It is automatically included as needed by the SPI driver
  *        dispatch header located in LUFA/Drivers/Peripheral/SPI.h.
  *
- *  \section Sec_ExampleUsage Example Usage
+ *  \section Sec_SPI_AVR8_ExampleUsage Example Usage
  *  The following snippet is an example of how this module may be used within a typical
  *  application.
  *
@@ -99,7 +99,7 @@
 	/* Public Interface - May be used in end-application: */
 		/* Macros: */
 			/** \name SPI Prescaler Configuration Masks */
-			//@{
+			/**@{*/
 			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 2. */
 			#define SPI_SPEED_FCPU_DIV_2           SPI_USE_DOUBLESPEED
 
@@ -120,43 +120,43 @@
 
 			/** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 128. */
 			#define SPI_SPEED_FCPU_DIV_128         ((1 << SPR1) | (1 << SPR0))
-			//@}
+			/**@}*/
 
 			/** \name SPI SCK Polarity Configuration Masks */
-			//@{
+			/**@{*/
 			/** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the rising edge. */
 			#define SPI_SCK_LEAD_RISING            (0 << CPOL)
 
 			/** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the falling edge. */
 			#define SPI_SCK_LEAD_FALLING           (1 << CPOL)
-			//@}
+			/**@}*/
 
 			/** \name SPI Sample Edge Configuration Masks */
-			//@{
+			/**@{*/
 			/** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should sampled on the leading edge. */
 			#define SPI_SAMPLE_LEADING             (0 << CPHA)
 
 			/** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
 			#define SPI_SAMPLE_TRAILING            (1 << CPHA)
-			//@}
+			/**@}*/
 
 			/** \name SPI Data Ordering Configuration Masks */
-			//@{
+			/**@{*/
 			/** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out MSB first. */
 			#define SPI_ORDER_MSB_FIRST            (0 << DORD)
 
 			/** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out LSB first. */
 			#define SPI_ORDER_LSB_FIRST            (1 << DORD)
-			//@}
+			/**@}*/
 
 			/** \name SPI Mode Configuration Masks */
-			//@{
+			/**@{*/
 			/** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
 			#define SPI_MODE_SLAVE                 (0 << MSTR)
 
 			/** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
 			#define SPI_MODE_MASTER                (1 << MSTR)
-			//@}
+			/**@}*/
 
 		/* Inline Functions: */
 			/** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other