X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/328ed71ce728de4a6633d981441ac9837c9cd62a..8b053d6ba5dddc5f00fb52873185a2350bef5ce8:/LUFA/Drivers/Board/LEDs.h

diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index f34041e29..0aebbde5c 100644
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -58,7 +58,7 @@
  *
  *  \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
  *        a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
- *        If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D 
+ *        If other behavior is desired, either alias the remaining LED masks to existing LED masks via the -D 
  *        switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when
  *        a non-existing LED is referenced in application code. Note that this means that it is possible to make
  *        compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)
@@ -140,41 +140,41 @@
 
 		/** Turns on the LEDs specified in the given LED mask.
 		 *
-		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
+		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
 		 */
 		static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask);
 
 		/** Turns off the LEDs specified in the given LED mask.
 		 *
-		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
+		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
 		 */
 		static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask);
 
 		/** Turns off all LEDs not specified in the given LED mask, and turns on all the LEDs in the given LED
 		 *  mask.
 		 *
-		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
+		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
 		 */
 		static inline void LEDs_SetAllLEDs(const uint8_t LEDMask);
 
 		/** Turns off all LEDs in the LED mask that are not set in the active mask, and turns on all the LEDs
 		 *  specified in both the LED and active masks.
 		 *
-		 *  \param[in] LEDMask     Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
-		 *  \param[in] ActiveMask  Mask of whether the LEDs in the LED mask should be turned on or off
+		 *  \param[in] LEDMask     Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
+		 *  \param[in] ActiveMask  Mask of whether the LEDs in the LED mask should be turned on or off.
 		 */
 		static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask);
 		
 		/** Toggles all LEDs in the LED mask, leaving all others in their current states.
 		 *
-		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
+		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
 		 */
 		static inline void LEDs_ToggleLEDs(const uint8_t LEDMask);
 
 		/** Returns the status of all the board LEDs; set LED masks in the return value indicate that the
 		 *  corresponding LED is on.
 		 *
-		 *  \return Mask of the board LEDs which are currently turned on
+		 *  \return Mask of the board LEDs which are currently turned on.
 		 */
 		static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
 	#endif