X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/328ed71ce728de4a6633d981441ac9837c9cd62a..1621158c622e8dbe49deaacf88ea3f5b843b54ac:/LUFA/Drivers/Board/LEDs.h?ds=sidebyside

diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index f34041e29..63c997b1b 100644
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -39,6 +39,8 @@
  *
  *  If the BOARD value is set to BOARD_USER, this will include the /Board/LEDs.h file in the user project
  *  directory.
+ *
+ *  For possible BOARD makefile values, see \ref Group_BoardTypes.
  */
 
 /** \ingroup Group_BoardDrivers
@@ -56,6 +58,8 @@
  *  directory. Otherwise, it will include the appropriate built in board driver header file. If the BOARD value
  *  is set to BOARD_NONE, this driver is silently disabled.
  *
+ *  For possible BOARD makefile values, see \ref Group_BoardTypes.
+ *
  *  \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
  *        a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
  *        If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D 
@@ -111,6 +115,14 @@
 		#include "BENITO/LEDs.h"
 	#elif (BOARD == BOARD_JMDBU2)
 		#include "JMDBU2/LEDs.h"
+	#elif (BOARD == BOARD_OLIMEX162)
+		#include "OLIMEX162/LEDs.h"
+	#elif (BOARD == BOARD_USBFOO)
+		#include "USBFOO/LEDs.h"
+	#elif (BOARD == BOARD_UDIP)
+		#include "UDIP/LEDs.h"		
+	#elif (BOARD == BOARD_BUI)
+		#include "BUI/LEDs.h"		
 	#elif (BOARD == BOARD_USER)
 		#include "Board/LEDs.h"
 	#endif
@@ -133,48 +145,49 @@
 	
 	/* Pseudo-Functions for Doxygen: */
 	#if defined(__DOXYGEN__)
-		/** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port
+		/** Initialises the board LED driver so that the LEDs can be controlled. This sets the appropriate port
 		 *  I/O pins as outputs, and sets the LEDs to default to off.
 		 */
 		static inline void LEDs_Init(void);
 
 		/** Turns on the LEDs specified in the given LED mask.
 		 *
-		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
+		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
 		 */
 		static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask);
 
 		/** Turns off the LEDs specified in the given LED mask.
 		 *
-		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
+		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
 		 */
 		static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask);
 
 		/** Turns off all LEDs not specified in the given LED mask, and turns on all the LEDs in the given LED
 		 *  mask.
 		 *
-		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
+		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
 		 */
 		static inline void LEDs_SetAllLEDs(const uint8_t LEDMask);
 
 		/** Turns off all LEDs in the LED mask that are not set in the active mask, and turns on all the LEDs
 		 *  specified in both the LED and active masks.
 		 *
-		 *  \param[in] LEDMask     Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
-		 *  \param[in] ActiveMask  Mask of whether the LEDs in the LED mask should be turned on or off
+		 *  \param[in] LEDMask     Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
+		 *  \param[in] ActiveMask  Mask of whether the LEDs in the LED mask should be turned on or off.
 		 */
-		static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask);
+		static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
+		                                   const uint8_t ActiveMask);
 		
 		/** Toggles all LEDs in the LED mask, leaving all others in their current states.
 		 *
-		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
+		 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
 		 */
 		static inline void LEDs_ToggleLEDs(const uint8_t LEDMask);
 
 		/** Returns the status of all the board LEDs; set LED masks in the return value indicate that the
 		 *  corresponding LED is on.
 		 *
-		 *  \return Mask of the board LEDs which are currently turned on
+		 *  \return Mask of the board LEDs which are currently turned on.
 		 */
 		static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
 	#endif