X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/3038ea1c6ea8cbc1a0a61ea1674b6c097b6b006d..3c1b28cf5ff16fede61f2abf37d5616f3e661036:/Projects/TempDataLogger/Descriptors.c

diff --git a/Projects/TempDataLogger/Descriptors.c b/Projects/TempDataLogger/Descriptors.c
index f70802cef..551c66ae6 100644
--- a/Projects/TempDataLogger/Descriptors.c
+++ b/Projects/TempDataLogger/Descriptors.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2011.
+     Copyright (C) Dean Camera, 2012.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -37,17 +37,6 @@
 
 #include "Descriptors.h"
 
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
-	#warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
 
 /** HID class report descriptor. This is a special descriptor constructed with values from the
  *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
@@ -136,20 +125,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
 
-			.EndpointAddress        = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM),
+			.EndpointAddress        = MASS_STORAGE_IN_EPADDR,
 			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
 			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
-			.PollingIntervalMS      = 0x01
+			.PollingIntervalMS      = 0x05
 		},
 
 	.MS_DataOutEndpoint =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
 
-			.EndpointAddress        = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM),
+			.EndpointAddress        = MASS_STORAGE_OUT_EPADDR,
 			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
 			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
-			.PollingIntervalMS      = 0x01
+			.PollingIntervalMS      = 0x05
 		},
 
 	.HID_Interface =
@@ -183,10 +172,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
 
-			.EndpointAddress        = (ENDPOINT_DIR_IN | GENERIC_IN_EPNUM),
+			.EndpointAddress        = GENERIC_IN_EPADDR,
 			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
 			.EndpointSize           = GENERIC_EPSIZE,
-			.PollingIntervalMS      = 0x01
+			.PollingIntervalMS      = 0x05
 		},
 };