X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/2a2de8fea94d2a524e988725585b17746cd30dba..05ac59d0eeb956adc316d89ee06ca13bd3c11aac:/Bootloaders/TeensyHID/TeensyHID.c diff --git a/Bootloaders/TeensyHID/TeensyHID.c b/Bootloaders/TeensyHID/TeensyHID.c index ffbaca8b3..f2bb6df33 100644 --- a/Bootloaders/TeensyHID/TeensyHID.c +++ b/Bootloaders/TeensyHID/TeensyHID.c @@ -1,157 +1,157 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2010. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the TeensyHID bootloader. This file contains the complete bootloader logic. - */ - -#include "TeensyHID.h" - -/** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run - * via a soft reset. When cleared, the bootloader will abort, the USB interface will shut down and the application - * started via a forced watchdog reset. - */ -bool RunBootloader = true; - -/** Main program entry point. This routine configures the hardware required by the bootloader, then continuously - * runs the bootloader processing routine until instructed to soft-exit. - */ -int main(void) -{ - /* Setup hardware required for the bootloader */ - SetupHardware(); - - /* Enable global interrupts so that the USB stack can function */ - sei(); - - while (RunBootloader) - USB_USBTask(); - - /* Disconnect from the host - USB interface will be reset later along with the AVR */ - USB_Detach(); - - /* Enable the watchdog and force a timeout to reset the AVR */ - wdt_enable(WDTO_250MS); - - for (;;); -} - -/** Configures all hardware required for the bootloader. */ -void SetupHardware(void) -{ - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Relocate the interrupt vector table to the bootloader section */ - MCUCR = (1 << IVCE); - MCUCR = (1 << IVSEL); - - /* Initialize USB subsystem */ - USB_Init(); -} - -/** Event handler for the USB_ConfigurationChanged event. This configures the device's endpoints ready - * to relay data to and from the attached USB host. - */ -void EVENT_USB_Device_ConfigurationChanged(void) -{ - /* Setup HID Report Endpoint */ - Endpoint_ConfigureEndpoint(HID_EPNUM, EP_TYPE_INTERRUPT, - ENDPOINT_DIR_IN, HID_EPSIZE, - ENDPOINT_BANK_SINGLE); -} - -/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific - * control requests that are not handled internally by the USB library (including the HID commands, which are - * all issued via the control endpoint), so that they can be handled appropriately for the application. - */ -void EVENT_USB_Device_UnhandledControlRequest(void) -{ - /* Handle HID Class specific requests */ - switch (USB_ControlRequest.bRequest) - { - case REQ_SetReport: - Endpoint_ClearSETUP(); - - /* Wait until the command has been sent by the host */ - while (!(Endpoint_IsOUTReceived())); - - /* Read in the write destination index */ - uint16_t PageIndex = Endpoint_Read_Word_LE(); - - /* Check if the command is a program page command, or a start application command */ - if (PageIndex == TEENSY_STARTAPPLICATION) - { - RunBootloader = false; - } - else - { - #if (FLASHEND > 0xFFFF) - uint32_t PageByteAddress = ((uint32_t)PageIndex << 8); - #else - uint16_t PageByteAddress = PageIndex; - #endif - - /* Erase the given FLASH page, ready to be programmed */ - boot_page_erase(PageByteAddress); - boot_spm_busy_wait(); - - /* Write each of the FLASH page's bytes in sequence */ - #if (SPM_PAGESIZE == 128) - for (uint8_t PageByte = 0; PageByte < SPM_PAGESIZE; PageByte += 2) - #else - for (uint16_t PageByte = 0; PageByte < SPM_PAGESIZE; PageByte += 2) - #endif - { - /* Check if endpoint is empty - if so clear it and wait until ready for next packet */ - if (!(Endpoint_BytesInEndpoint())) - { - Endpoint_ClearOUT(); - while (!(Endpoint_IsOUTReceived())); - } - - /* Write the next data word to the FLASH page */ - boot_page_fill(PageByteAddress + PageByte, Endpoint_Read_Word_LE()); - } - - /* Write the filled FLASH page to memory */ - boot_page_write(PageByteAddress); - boot_spm_busy_wait(); - } - - Endpoint_ClearOUT(); - - Endpoint_ClearStatusStage(); - - break; - } -} +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the TeensyHID bootloader. This file contains the complete bootloader logic. + */ + +#include "TeensyHID.h" + +/** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run + * via a soft reset. When cleared, the bootloader will abort, the USB interface will shut down and the application + * started via a forced watchdog reset. + */ +bool RunBootloader = true; + +/** Main program entry point. This routine configures the hardware required by the bootloader, then continuously + * runs the bootloader processing routine until instructed to soft-exit. + */ +int main(void) +{ + /* Setup hardware required for the bootloader */ + SetupHardware(); + + /* Enable global interrupts so that the USB stack can function */ + sei(); + + while (RunBootloader) + USB_USBTask(); + + /* Disconnect from the host - USB interface will be reset later along with the AVR */ + USB_Detach(); + + /* Enable the watchdog and force a timeout to reset the AVR */ + wdt_enable(WDTO_250MS); + + for (;;); +} + +/** Configures all hardware required for the bootloader. */ +void SetupHardware(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Relocate the interrupt vector table to the bootloader section */ + MCUCR = (1 << IVCE); + MCUCR = (1 << IVSEL); + + /* Initialize USB subsystem */ + USB_Init(); +} + +/** Event handler for the USB_ConfigurationChanged event. This configures the device's endpoints ready + * to relay data to and from the attached USB host. + */ +void EVENT_USB_Device_ConfigurationChanged(void) +{ + /* Setup HID Report Endpoint */ + Endpoint_ConfigureEndpoint(HID_EPNUM, EP_TYPE_INTERRUPT, + ENDPOINT_DIR_IN, HID_EPSIZE, + ENDPOINT_BANK_SINGLE); +} + +/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific + * control requests that are not handled internally by the USB library (including the HID commands, which are + * all issued via the control endpoint), so that they can be handled appropriately for the application. + */ +void EVENT_USB_Device_UnhandledControlRequest(void) +{ + /* Handle HID Class specific requests */ + switch (USB_ControlRequest.bRequest) + { + case REQ_SetReport: + Endpoint_ClearSETUP(); + + /* Wait until the command has been sent by the host */ + while (!(Endpoint_IsOUTReceived())); + + /* Read in the write destination index */ + uint16_t PageIndex = Endpoint_Read_Word_LE(); + + /* Check if the command is a program page command, or a start application command */ + if (PageIndex == TEENSY_STARTAPPLICATION) + { + RunBootloader = false; + } + else + { + #if (FLASHEND > 0xFFFF) + uint32_t PageByteAddress = ((uint32_t)PageIndex << 8); + #else + uint16_t PageByteAddress = PageIndex; + #endif + + /* Erase the given FLASH page, ready to be programmed */ + boot_page_erase(PageByteAddress); + boot_spm_busy_wait(); + + /* Write each of the FLASH page's bytes in sequence */ + #if (SPM_PAGESIZE == 128) + for (uint8_t PageByte = 0; PageByte < SPM_PAGESIZE; PageByte += 2) + #else + for (uint16_t PageByte = 0; PageByte < SPM_PAGESIZE; PageByte += 2) + #endif + { + /* Check if endpoint is empty - if so clear it and wait until ready for next packet */ + if (!(Endpoint_BytesInEndpoint())) + { + Endpoint_ClearOUT(); + while (!(Endpoint_IsOUTReceived())); + } + + /* Write the next data word to the FLASH page */ + boot_page_fill(PageByteAddress + PageByte, Endpoint_Read_Word_LE()); + } + + /* Write the filled FLASH page to memory */ + boot_page_write(PageByteAddress); + boot_spm_busy_wait(); + } + + Endpoint_ClearOUT(); + + Endpoint_ClearStatusStage(); + + break; + } +}