X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/2a072db7030fa33be1e8dcf82ebf0b45cb4d77c1..19ecd04f37f68c0674f1194aa8d8a4fc94d6168b:/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c index a35dcb17a..d18e643b4 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c @@ -31,16 +31,22 @@ #define INCLUDE_FROM_BLUETOOTH_ACLPACKETS_C #include "BluetoothACLPackets.h" +/** Bluetooth ACL processing task. This task should be called repeatedly the main Bluetooth + * stack task to manage the ACL processing state. + */ void Bluetooth_ACLTask(void) { - Bluetooth_ProcessACLPackets(); + /* Process incomming ACL packets, if any */ + Bluetooth_ProcessIncommingACLPackets(); + /* Check for any half-open channels, send configuration details to the remote device if found */ for (uint8_t i = 0; i < BLUETOOTH_MAX_OPEN_CHANNELS; i++) { Bluetooth_Channel_t* ChannelData = &Bluetooth_Connection.Channels[i]; bool MustSendConfigReq = true; + /* Check if we are in a channel state which requires a configuration request to be sent */ switch (ChannelData->State) { case Channel_Config_WaitConfig: @@ -54,6 +60,7 @@ void Bluetooth_ACLTask(void) break; } + /* Only send a configuration request if it the channel was in a state which required it */ if (MustSendConfigReq) { struct @@ -68,10 +75,13 @@ void Bluetooth_ACLTask(void) } Option_LocalMTU; } PacketData; + /* Fill out the Signal Command header in the response packet */ PacketData.SignalCommandHeader.Code = BT_SIGNAL_CONFIGURATION_REQUEST; PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignallingIdentifier; PacketData.SignalCommandHeader.Length = sizeof(PacketData.ConfigurationRequest) + sizeof(PacketData.Option_LocalMTU); + + /* Fill out the Configuration Request in the response packet, including local MTU information */ PacketData.ConfigurationRequest.DestinationChannel = ChannelData->RemoteNumber; PacketData.ConfigurationRequest.Flags = 0; PacketData.Option_LocalMTU.Header.Type = BT_CONFIG_OPTION_MTU; @@ -86,7 +96,11 @@ void Bluetooth_ACLTask(void) } } -static void Bluetooth_ProcessACLPackets(void) +/** Incomming ACL packet processing task. This task is called by the main ACL processing task to read in and process + * any incomming ACL packets to the device, handling signal requests as they are received or passing along channel + * data to the user application. + */ +static void Bluetooth_ProcessIncommingACLPackets(void) { BT_ACL_Header_t ACLPacketHeader; BT_DataPacket_Header_t DataHeader; @@ -100,6 +114,7 @@ static void Bluetooth_ProcessACLPackets(void) return; } + /* Read in the received ACL packet headers when it has been discovered that a packet has been received */ Pipe_Read_Stream_LE(&ACLPacketHeader, sizeof(ACLPacketHeader)); Pipe_Read_Stream_LE(&DataHeader, sizeof(DataHeader)); @@ -110,27 +125,50 @@ static void Bluetooth_ProcessACLPackets(void) BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", DataHeader.DestinationChannel); BT_ACL_DEBUG(2, "-- Payload Length: 0x%04X", DataHeader.PayloadLength); + /* Check the packet's destination channel - signalling channel should be processed by the stack internally */ if (DataHeader.DestinationChannel == BT_CHANNEL_SIGNALING) { + /* Read in the Signal Command header of the incomming packet */ BT_Signal_Header_t SignalCommandHeader; Pipe_Read_Stream_LE(&SignalCommandHeader, sizeof(SignalCommandHeader)); - + + /* Dispatch to the appropriate handler function based on the Signal message code */ switch (SignalCommandHeader.Code) { case BT_SIGNAL_CONNECTION_REQUEST: - Bluetooth_Signal_ConnectionReq(&ACLPacketHeader, &DataHeader, &SignalCommandHeader); + Bluetooth_Signal_ConnectionReq(&SignalCommandHeader); + break; + case BT_SIGNAL_CONNECTION_RESPONSE: + Bluetooth_Signal_ConnectionResp(&SignalCommandHeader); break; case BT_SIGNAL_CONFIGURATION_REQUEST: - Bluetooth_Signal_ConfigurationReq(&ACLPacketHeader, &DataHeader, &SignalCommandHeader); + Bluetooth_Signal_ConfigurationReq(&SignalCommandHeader); + break; + case BT_SIGNAL_CONFIGURATION_RESPONSE: + Bluetooth_Signal_ConfigurationResp(&SignalCommandHeader); break; case BT_SIGNAL_DISCONNECTION_REQUEST: - Bluetooth_Signal_DisconnectionReq(&ACLPacketHeader, &DataHeader, &SignalCommandHeader); - break; + Bluetooth_Signal_DisconnectionReq(&SignalCommandHeader); + break; + case BT_SIGNAL_DISCONNECTION_RESPONSE: + Bluetooth_Signal_DisconnectionResp(&SignalCommandHeader); + break; case BT_SIGNAL_ECHO_REQUEST: - Bluetooth_Signal_EchoReq(&ACLPacketHeader, &DataHeader, &SignalCommandHeader); + Bluetooth_Signal_EchoReq(&SignalCommandHeader); break; case BT_SIGNAL_INFORMATION_REQUEST: - Bluetooth_Signal_InformationReq(&ACLPacketHeader, &DataHeader, &SignalCommandHeader); + Bluetooth_Signal_InformationReq(&SignalCommandHeader); + break; + case BT_SIGNAL_COMMAND_REJECT: + BT_ACL_DEBUG(1, "<< Command Reject", NULL); + + uint16_t RejectReason; + Pipe_Read_Stream_LE(&RejectReason, sizeof(RejectReason)); + Pipe_Discard_Stream(ACLPacketHeader.DataLength - sizeof(RejectReason)); + Pipe_ClearIN(); + Pipe_Freeze(); + + BT_ACL_DEBUG(2, "-- Reason: %d", RejectReason); break; default: BT_ACL_DEBUG(1, "<< Unknown Signaling Command 0x%02X", SignalCommandHeader.Code); @@ -143,29 +181,40 @@ static void Bluetooth_ProcessACLPackets(void) } else { - Bluetooth_PacketReceived(&DataHeader.PayloadLength, Bluetooth_GetChannelData(DataHeader.DestinationChannel, true)); - - Pipe_SelectPipe(BLUETOOTH_DATA_IN_PIPE); - Pipe_Discard_Stream(DataHeader.PayloadLength); + /* Non-signalling packet received, read in the packet contents and pass to the user application */ + uint8_t PacketData[DataHeader.PayloadLength]; + Pipe_Read_Stream_LE(PacketData, DataHeader.PayloadLength); Pipe_ClearIN(); Pipe_Freeze(); + + Bluetooth_PacketReceived(PacketData, DataHeader.PayloadLength, Bluetooth_GetChannelData(DataHeader.DestinationChannel, false)); } } +/** Sends a packet to the remote device on the specified channel. + * + * \param Data Pointer to a buffer where the data is to be sourced from + * \param DataLen Length of the data to send + * \param Channel Channel information structure containing the destination channel's information, NULL to send + * to the remote device's signalling channel + * + * \return A value from the \ref BT_SendPacket_ErrorCodes_t enum + */ uint8_t Bluetooth_SendPacket(void* Data, uint16_t DataLen, Bluetooth_Channel_t* Channel) { BT_ACL_Header_t ACLPacketHeader; BT_DataPacket_Header_t DataHeader; + /* A remote device must be connected before a packet transmission is attempted */ if (!(Bluetooth_Connection.IsConnected)) return BT_SENDPACKET_NotConnected; + /* If the destination channel is not the signalling channel and it is not currently fully open, abort */ if ((Channel != NULL) && (Channel->State != Channel_Open)) return BT_SENDPACKET_ChannelNotOpen; - // TODO: Add packet fragmentation here after retrieving the device's signal channel MTU - - ACLPacketHeader.ConnectionHandle = Bluetooth_Connection.ConnectionHandle | (1 << 13); + /* Fill out the packet's header from the remote device connection information structure */ + ACLPacketHeader.ConnectionHandle = (Bluetooth_Connection.ConnectionHandle | BT_ACL_FIRST_AUTOFLUSH); ACLPacketHeader.DataLength = sizeof(DataHeader) + DataLen; DataHeader.PayloadLength = DataLen; DataHeader.DestinationChannel = (Channel == NULL) ? BT_CHANNEL_SIGNALING : Channel->RemoteNumber; @@ -173,9 +222,11 @@ uint8_t Bluetooth_SendPacket(void* Data, uint16_t DataLen, Bluetooth_Channel_t* Pipe_SelectPipe(BLUETOOTH_DATA_OUT_PIPE); Pipe_Unfreeze(); + /* Write the packet contents to the pipe so that it can be sent to the remote device */ Pipe_Write_Stream_LE(&ACLPacketHeader, sizeof(ACLPacketHeader)); Pipe_Write_Stream_LE(&DataHeader, sizeof(DataHeader)); Pipe_Write_Stream_LE(Data, DataLen); + Pipe_ClearOUT(); Pipe_Freeze(); @@ -189,9 +240,115 @@ uint8_t Bluetooth_SendPacket(void* Data, uint16_t DataLen, Bluetooth_Channel_t* return BT_SENDPACKET_NoError; } -static inline void Bluetooth_Signal_ConnectionReq(BT_ACL_Header_t* ACLPacketHeader, - BT_DataPacket_Header_t* DataHeader, - BT_Signal_Header_t* SignalCommandHeader) +/** Opens a bluetooth channel to the currently connected remote device, so that data can be exchanged. + * + * \note The channel is not immediately opened when this function returns - it must undergo a two way + * connection and configuration process first as the main Bluetooth stack processing task is + * repeatedly called. The returned channel is unusable by the user application until its State + * element has progressed to the Open state. + * + * \param PSM PSM of the service that the channel is to be opened for + * + * \return Pointer to the channel information structure of the opened channel, or NULL if no free channels + */ +Bluetooth_Channel_t* Bluetooth_OpenChannel(uint16_t PSM) +{ + Bluetooth_Channel_t* ChannelData = NULL; + + /* Search through the channel information list for a free channel item */ + for (uint8_t i = 0; i < BLUETOOTH_MAX_OPEN_CHANNELS; i++) + { + if (Bluetooth_Connection.Channels[i].State == Channel_Closed) + { + ChannelData = &Bluetooth_Connection.Channels[i]; + + /* Set the new channel structure's local channel number to a unique value within the connection orientated + channel address space */ + ChannelData->LocalNumber = (BT_CHANNELNUMBER_BASEOFFSET + i); + break; + } + } + + /* If no free channel item was found in the list, all channels are occupied - abort */ + if (ChannelData == NULL) + return NULL; + + /* Reset and fill out the allocated channel's information structure with defaults */ + ChannelData->RemoteNumber = 0; + ChannelData->PSM = PSM; + ChannelData->LocalMTU = MAXIMUM_CHANNEL_MTU; + ChannelData->State = Channel_WaitConnectRsp; + + struct + { + BT_Signal_Header_t SignalCommandHeader; + BT_Signal_ConnectionReq_t ConnectionRequest; + } PacketData; + + /* Fill out the Signal Command header in the response packet */ + PacketData.SignalCommandHeader.Code = BT_SIGNAL_CONNECTION_REQUEST; + PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignallingIdentifier; + PacketData.SignalCommandHeader.Length = sizeof(PacketData.ConnectionRequest); + + /* Fill out the Connection Request in the response packet */ + PacketData.ConnectionRequest.PSM = PSM; + PacketData.ConnectionRequest.SourceChannel = ChannelData->LocalNumber; + + Bluetooth_SendPacket(&PacketData, sizeof(PacketData), NULL); + + BT_ACL_DEBUG(1, ">> L2CAP Connection Request", NULL); + BT_ACL_DEBUG(2, "-- PSM 0x%04X", PacketData.ConnectionRequest.PSM); + BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", PacketData.ConnectionRequest.SourceChannel); + + return ChannelData; +} + +/** Closes a bluetooth channel that is open to the currently connected remote device, so that no further data + * can be exchanged. + * + * \note The channel is not immediately closed when this function returns - it must undergo an asynchronous + * disconnection process first as the main Bluetooth stack processing task is repeatedly called. The + * returned channel is unusable by the user application upon return however the channel is not completely + * closed until its State element has progressed to the Closed state. + * + * \param Channel Channel information structure of the channel to close + */ +void Bluetooth_CloseChannel(Bluetooth_Channel_t* Channel) +{ + /* Don't try to close a non-existing or already closed channel */ + if ((Channel == NULL) || (Channel->State == Channel_Closed)) + return; + + /* Set the channel's state to the start of the teardown process */ + Channel->State = Channel_WaitDisconnect; + + struct + { + BT_Signal_Header_t SignalCommandHeader; + BT_Signal_DisconnectionReq_t DisconnectionRequest; + } PacketData; + + /* Fill out the Signal Command header in the response packet */ + PacketData.SignalCommandHeader.Code = BT_SIGNAL_DISCONNECTION_REQUEST; + PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignallingIdentifier; + PacketData.SignalCommandHeader.Length = sizeof(PacketData.DisconnectionRequest); + + /* Fill out the Disconnection Request in the response packet */ + PacketData.DisconnectionRequest.DestinationChannel = Channel->RemoteNumber; + PacketData.DisconnectionRequest.SourceChannel = Channel->LocalNumber; + + Bluetooth_SendPacket(&PacketData, sizeof(PacketData), NULL); + + BT_ACL_DEBUG(1, ">> L2CAP Disconnection Request", NULL); + BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", PacketData.DisconnectionRequest.DestinationChannel); + BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", PacketData.DisconnectionRequest.SourceChannel); +} + +/** Internal Bluetooth stack Signal Command processing routine for a Connection Request command. + * + * \param SignalCommandHeader Pointer to the start of the received packet's Signal Command header + */ +static inline void Bluetooth_Signal_ConnectionReq(BT_Signal_Header_t* SignalCommandHeader) { BT_Signal_ConnectionReq_t ConnectionRequest; @@ -204,63 +361,140 @@ static inline void Bluetooth_Signal_ConnectionReq(BT_ACL_Header_t* ACLPacketHead BT_ACL_DEBUG(2, "-- PSM: 0x%04X", ConnectionRequest.PSM); BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ConnectionRequest.SourceChannel); - Bluetooth_Channel_t* ChannelData = Bluetooth_InitChannelData(ConnectionRequest.SourceChannel, ConnectionRequest.PSM); + /* Try to retrieve the existing channel's information structure if it exists */ + Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConnectionRequest.SourceChannel, true); + + /* If an existing channel item with the correct remote channel number was not found, find a free channel entry */ + if (ChannelData == NULL) + { + /* Look through the channel information list for a free entry */ + for (uint8_t i = 0; i < BLUETOOTH_MAX_OPEN_CHANNELS; i++) + { + if (Bluetooth_Connection.Channels[i].State == Channel_Closed) + { + ChannelData = &Bluetooth_Connection.Channels[i]; + + /* Set the new channel structure's local channel number to a unique value within the connection orientated + channel address space */ + ChannelData->LocalNumber = (BT_CHANNELNUMBER_BASEOFFSET + i); + break; + } + } + } + /* Reset the channel item contents only if a channel entry was found for it */ + if (ChannelData != NULL) + { + ChannelData->RemoteNumber = ConnectionRequest.SourceChannel; + ChannelData->PSM = ConnectionRequest.PSM; + ChannelData->LocalMTU = MAXIMUM_CHANNEL_MTU; + ChannelData->State = Channel_Config_WaitConfig; + } + struct { BT_Signal_Header_t SignalCommandHeader; BT_Signal_ConnectionResp_t ConnectionResponse; } ResponsePacket; + /* Fill out the Signal Command header in the response packet */ ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_CONNECTION_RESPONSE; ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier; ResponsePacket.SignalCommandHeader.Length = sizeof(ResponsePacket.ConnectionResponse); - ResponsePacket.ConnectionResponse.Result = (ChannelData == NULL) ? BT_CONNECTION_REFUSED_RESOURCES : BT_CONNECTION_SUCCESSFUL; + + /* Fill out the Connection Response in the response packet */ ResponsePacket.ConnectionResponse.DestinationChannel = ChannelData->LocalNumber; ResponsePacket.ConnectionResponse.SourceChannel = ChannelData->RemoteNumber; + ResponsePacket.ConnectionResponse.Result = (ChannelData == NULL) ? BT_CONNECTION_REFUSED_RESOURCES : + BT_CONNECTION_SUCCESSFUL; ResponsePacket.ConnectionResponse.Status = 0x00; Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), NULL); BT_ACL_DEBUG(1, ">> L2CAP Connection Response", NULL); BT_ACL_DEBUG(2, "-- Result: 0x%02X", ResponsePacket.ConnectionResponse.Result); - BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ResponsePacket.ConnectionResponse.SourceChannel); BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", ResponsePacket.ConnectionResponse.DestinationChannel); + BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ResponsePacket.ConnectionResponse.SourceChannel); } -static inline void Bluetooth_Signal_ConfigurationReq(BT_ACL_Header_t* ACLPacketHeader, - BT_DataPacket_Header_t* DataHeader, - BT_Signal_Header_t* SignalCommandHeader) +/** Internal Bluetooth stack Signal Command processing routine for a Connection Response command. + * + * \param SignalCommandHeader Pointer to the start of the received packet's Signal Command header + */ +static inline void Bluetooth_Signal_ConnectionResp(BT_Signal_Header_t* SignalCommandHeader) { - BT_Signal_ConfigurationReq_t ConfigurationRequest; - uint8_t OptionsLen; - - Pipe_Read_Stream_LE(&ConfigurationRequest, sizeof(ConfigurationRequest)); - OptionsLen = (DataHeader->PayloadLength - sizeof(*SignalCommandHeader)); + BT_Signal_ConnectionResp_t ConnectionResponse; - Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConfigurationRequest.DestinationChannel, false); + Pipe_Read_Stream_LE(&ConnectionResponse, sizeof(ConnectionResponse)); + + Pipe_ClearIN(); + Pipe_Freeze(); - while (OptionsLen) + BT_ACL_DEBUG(1, "<< L2CAP Connection Response", NULL); + BT_ACL_DEBUG(2, "-- Result: 0x%02X", ConnectionResponse.Result); + BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ConnectionResponse.SourceChannel); + BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", ConnectionResponse.DestinationChannel); + + /* Search for the referenced channel in the channel information list */ + Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConnectionResponse.SourceChannel, false); + + /* Only progress if the referenced channel data was found */ + if (ChannelData != NULL) { - BT_Config_Option_Header_t OptionHeader; - - Pipe_Read_Stream_LE(&OptionHeader, sizeof(OptionHeader)); + /* Set the channel structure's remote channel number to the channel allocated on the remote device */ + ChannelData->RemoteNumber = ConnectionResponse.SourceChannel; + ChannelData->State = (ConnectionResponse.Result == BT_CONNECTION_SUCCESSFUL) ? + Channel_Config_WaitConfig : Channel_Closed; + } +} + +/** Internal Bluetooth stack Signal Command processing routine for a Configuration Request command. + * + * \param SignalCommandHeader Pointer to the start of the received packet's Signal Command header + */ +static inline void Bluetooth_Signal_ConfigurationReq(BT_Signal_Header_t* SignalCommandHeader) +{ + BT_Signal_ConfigurationReq_t ConfigurationRequest; - if ((OptionHeader.Type == BT_CONFIG_OPTION_MTU) && (ChannelData != NULL)) - Pipe_Read_Stream_LE(&ChannelData->RemoteMTU, sizeof(ChannelData->RemoteMTU)); - else - Pipe_Discard_Stream(OptionHeader.Length); + /* Allocate a buffer large enough to hold the variable number of configuration options in the request */ + uint8_t OptionsLen = (SignalCommandHeader->Length - sizeof(ConfigurationRequest)); + uint8_t Options[OptionsLen]; - OptionsLen -= (sizeof(OptionHeader) + OptionHeader.Length); - } + Pipe_Read_Stream_LE(&ConfigurationRequest, sizeof(ConfigurationRequest)); + Pipe_Read_Stream_LE(&Options, sizeof(Options)); Pipe_ClearIN(); Pipe_Freeze(); + /* Search for the referenced channel in the channel information list */ + Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConfigurationRequest.DestinationChannel, false); + BT_ACL_DEBUG(1, "<< L2CAP Configuration Request", NULL); BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", ConfigurationRequest.DestinationChannel); - BT_ACL_DEBUG(2, "-- Options Len: 0x%04X", ConfigurationRequest.DestinationChannel); BT_ACL_DEBUG(2, "-- Remote MTU: 0x%04X", ChannelData->RemoteMTU); + BT_ACL_DEBUG(2, "-- Options Len: 0x%04X", OptionsLen); + + /* Only look at the channel configuration options if a valid channel entry for the local channel number was found */ + if (ChannelData != NULL) + { + /* Iterate through each option in the configuration request to look for ones which can be processed */ + uint8_t OptionPos = 0; + while (OptionPos < OptionsLen) + { + BT_Config_Option_Header_t* OptionHeader = (BT_Config_Option_Header_t*)&Options[OptionPos]; + void* OptionData = &Options[OptionPos + sizeof(*OptionHeader)]; + + BT_ACL_DEBUG(2, "-- Option Type: 0x%04X", OptionHeader->Type); + BT_ACL_DEBUG(2, "-- Option Length: 0x%04X", (sizeof(*OptionHeader) + OptionHeader->Length)); + + /* Store the remote MTU option's value if present */ + if (OptionHeader->Type == BT_CONFIG_OPTION_MTU) + ChannelData->RemoteMTU = *((uint16_t*)OptionData); + + /* Progress to the next option in the packet */ + OptionPos += (sizeof(*OptionHeader) + OptionHeader->Length); + } + } struct { @@ -268,9 +502,12 @@ static inline void Bluetooth_Signal_ConfigurationReq(BT_ACL_Header_t* ACLPacketH BT_Signal_ConfigurationResp_t ConfigurationResponse; } ResponsePacket; + /* Fill out the Signal Command header in the response packet */ ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_CONFIGURATION_RESPONSE; ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier; ResponsePacket.SignalCommandHeader.Length = sizeof(ResponsePacket.ConfigurationResponse); + + /* Fill out the Configuration Response in the response packet */ ResponsePacket.ConfigurationResponse.SourceChannel = ChannelData->RemoteNumber; ResponsePacket.ConfigurationResponse.Flags = 0x00; ResponsePacket.ConfigurationResponse.Result = (ChannelData != NULL) ? BT_CONFIGURATION_SUCCESSFUL : BT_CONFIGURATION_REJECTED; @@ -298,9 +535,55 @@ static inline void Bluetooth_Signal_ConfigurationReq(BT_ACL_Header_t* ACLPacketH BT_ACL_DEBUG(2, "-- Result: 0x%02X", ResponsePacket.ConfigurationResponse.Result); } -static inline void Bluetooth_Signal_DisconnectionReq(BT_ACL_Header_t* ACLPacketHeader, - BT_DataPacket_Header_t* DataHeader, - BT_Signal_Header_t* SignalCommandHeader) +/** Internal Bluetooth stack Signal Command processing routine for a Configuration Response command. + * + * \param SignalCommandHeader Pointer to the start of the received packet's Signal Command header + */ +static inline void Bluetooth_Signal_ConfigurationResp(BT_Signal_Header_t* SignalCommandHeader) +{ + BT_Signal_ConfigurationResp_t ConfigurationResponse; + + Pipe_Read_Stream_LE(&ConfigurationResponse, sizeof(ConfigurationResponse)); + + Pipe_ClearIN(); + Pipe_Freeze(); + + BT_ACL_DEBUG(1, "<< L2CAP Configuration Response", NULL); + BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ConfigurationResponse.SourceChannel); + BT_ACL_DEBUG(2, "-- Result: 0x%02X", ConfigurationResponse.Result); + + /* Search for the referenced channel in the channel information list */ + Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConfigurationResponse.SourceChannel, true); + + /* Only update the channel's state if it was found in the channel list */ + if (ChannelData != NULL) + { + /* Check if the channel configuration completed successfuly */ + if (ConfigurationResponse.Result == BT_CONFIGURATION_SUCCESSFUL) + { + switch (ChannelData->State) + { + case Channel_Config_WaitReqResp: + ChannelData->State = Channel_Config_WaitReq; + break; + case Channel_Config_WaitResp: + ChannelData->State = Channel_Open; + break; + } + } + else + { + /* Configuration failed - close the channel */ + ChannelData->State = Channel_Closed; + } + } +} + +/** Internal Bluetooth stack Signal Command processing routine for a Disconnection Request command. + * + * \param SignalCommandHeader Pointer to the start of the received packet's Signal Command header + */ +static inline void Bluetooth_Signal_DisconnectionReq(BT_Signal_Header_t* SignalCommandHeader) { BT_Signal_DisconnectionReq_t DisconnectionRequest; @@ -313,7 +596,8 @@ static inline void Bluetooth_Signal_DisconnectionReq(BT_ACL_Header_t* ACLPacketH Pipe_ClearIN(); Pipe_Freeze(); - Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(DisconnectionRequest.SourceChannel, true); + /* Search for the referenced channel in the channel information list */ + Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(DisconnectionRequest.SourceChannel, true); struct { @@ -321,14 +605,18 @@ static inline void Bluetooth_Signal_DisconnectionReq(BT_ACL_Header_t* ACLPacketH BT_Signal_DisconnectionResp_t DisconnectionResponse; } ResponsePacket; + /* Fill out the Signal Command header in the response packet */ ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_DISCONNECTION_RESPONSE; ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier; ResponsePacket.SignalCommandHeader.Length = sizeof(ResponsePacket.DisconnectionResponse); - ResponsePacket.DisconnectionResponse.DestinationChannel = ChannelData->LocalNumber; - ResponsePacket.DisconnectionResponse.SourceChannel = ChannelData->RemoteNumber; + + /* Fill out the Disconnection Response in the response packet */ + ResponsePacket.DisconnectionResponse.DestinationChannel = ChannelData->RemoteNumber; + ResponsePacket.DisconnectionResponse.SourceChannel = ChannelData->LocalNumber; Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), NULL); + /* If the channel was found in the channel list, close it */ if (ChannelData != NULL) ChannelData->State = Channel_Closed; @@ -337,9 +625,36 @@ static inline void Bluetooth_Signal_DisconnectionReq(BT_ACL_Header_t* ACLPacketH BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", ResponsePacket.DisconnectionResponse.DestinationChannel); } -static inline void Bluetooth_Signal_EchoReq(BT_ACL_Header_t* ACLPacketHeader, - BT_DataPacket_Header_t* DataHeader, - BT_Signal_Header_t* SignalCommandHeader) +/** Internal Bluetooth stack Signal Command processing routine for a Disconnection Response command. + * + * \param SignalCommandHeader Pointer to the start of the received packet's Signal Command header + */ +static inline void Bluetooth_Signal_DisconnectionResp(BT_Signal_Header_t* SignalCommandHeader) +{ + BT_Signal_DisconnectionResp_t DisconnectionResponse; + + Pipe_Read_Stream_LE(&DisconnectionResponse, sizeof(DisconnectionResponse)); + + BT_ACL_DEBUG(1, "<< L2CAP Disconnection Response", NULL); + BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", DisconnectionResponse.DestinationChannel); + BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", DisconnectionResponse.SourceChannel); + + Pipe_ClearIN(); + Pipe_Freeze(); + + /* Search for the referenced channel in the channel information list */ + Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(DisconnectionResponse.SourceChannel, true); + + /* If the channel was found in the channel list, close it */ + if (ChannelData != NULL) + ChannelData->State = Channel_Closed; +} + +/** Internal Bluetooth stack Signal Command processing routine for an Echo Request command. + * + * \param SignalCommandHeader Pointer to the start of the received packet's Signal Command header + */ +static inline void Bluetooth_Signal_EchoReq(BT_Signal_Header_t* SignalCommandHeader) { BT_ACL_DEBUG(1, "<< L2CAP Echo Request", NULL); @@ -351,6 +666,7 @@ static inline void Bluetooth_Signal_EchoReq(BT_ACL_Header_t* ACLPacketHeader, BT_Signal_Header_t SignalCommandHeader; } ResponsePacket; + /* Fill out the Signal Command header in the response packet */ ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_ECHO_RESPONSE; ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier; ResponsePacket.SignalCommandHeader.Length = 0; @@ -360,9 +676,11 @@ static inline void Bluetooth_Signal_EchoReq(BT_ACL_Header_t* ACLPacketHeader, BT_ACL_DEBUG(1, ">> L2CAP Echo Response", NULL); } -static inline void Bluetooth_Signal_InformationReq(BT_ACL_Header_t* ACLPacketHeader, - BT_DataPacket_Header_t* DataHeader, - BT_Signal_Header_t* SignalCommandHeader) +/** Internal Bluetooth stack Signal Command processing routine for an Information Request command. + * + * \param SignalCommandHeader Pointer to the start of the received packet's Signal Command header + */ +static inline void Bluetooth_Signal_InformationReq(BT_Signal_Header_t* SignalCommandHeader) { BT_Signal_InformationReq_t InformationRequest; @@ -384,6 +702,7 @@ static inline void Bluetooth_Signal_InformationReq(BT_ACL_Header_t* ACLPacketHea uint8_t DataLen = 0; + /* Retrieve the requested information and store it in the outgoing packet, if found */ switch (InformationRequest.InfoType) { case BT_INFOREQ_MTU: @@ -404,10 +723,14 @@ static inline void Bluetooth_Signal_InformationReq(BT_ACL_Header_t* ACLPacketHea break; } + /* Fill out the Signal Command header in the response packet */ ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_INFORMATION_RESPONSE; ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier; ResponsePacket.SignalCommandHeader.Length = sizeof(ResponsePacket.InformationResponse) + DataLen; + /* Fill out the Information Response in the response packet */ + ResponsePacket.InformationResponse.InfoType = InformationRequest.InfoType; + Bluetooth_SendPacket(&ResponsePacket, (sizeof(ResponsePacket) - sizeof(ResponsePacket.Data) + DataLen), NULL); BT_ACL_DEBUG(1, ">> L2CAP Information Response", NULL);