X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/28401f7bb749350a66ebe95649d01a25c01842f7..b9952f480910bcb298075ef5a1cee308da50b1b4:/Demos/Device/ClassDriver/GenericHID/GenericHID.txt

diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt
index e466c0d17..3d72345f3 100644
--- a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt
+++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt
@@ -3,19 +3,19 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /** \mainpage Generic HID Device
  *
- *  \section SSec_Compat Demo Compatibility:
+ *  \section Sec_Compat Demo Compatibility:
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
- *  - Series 7 USB AVRs
- *  - Series 6 USB AVRs
- *  - Series 4 USB AVRs
- *  - Series 2 USB AVRs
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
  *
- *  \section SSec_Info USB Information:
+ *  \section Sec_Info USB Information:
  *
  *  The following table gives a rundown of the USB utilization of this demo.
  *
@@ -28,7 +28,7 @@
  *    <td><b>USB Class:</b></td>
  *    <td>Human Interface Device (HID)</td>
  *   </tr>
- *   <tr> 
+ *   <tr>
  *    <td><b>USB Subclass:</b></td>
  *    <td>N/A</td>
  *   </tr>
@@ -38,26 +38,26 @@
  *        USBIF HID Usage Tables</td>
  *   </tr>
  *   <tr>
- *    <td><b>Usable Speeds:</b></td>
+ *    <td><b>Supported USB Speeds:</b></td>
  *    <td>Low Speed Mode \n
  *        Full Speed Mode</td>
  *   </tr>
  *  </table>
  *
- *  \section SSec_Description Project Description: 
+ *  \section Sec_Description Project Description:
  *
  *  Generic HID device demonstration application. This gives a simple reference application
  *  for implementing a generic HID device, using the basic USB HID drivers in all modern
  *  OSes (i.e. no special drivers required). By default it accepts and sends up to 8 byte reports
  *  to and from a USB Host, and transmits the last sent report back to the host.
- *  
+ *
  *  On start-up the system will automatically enumerate and function as a vendor HID device.
  *  When controlled by a custom HID class application, reports can be sent and received by
  *  both the standard data endpoint and control request methods defined in the HID specification.
  *
- *  \section SSec_Options Project Options
- *  
- *  The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value.
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *
  *  <table>
  *   <tr>
@@ -67,9 +67,10 @@
  *   </tr>
  *   <tr>
  *    <td>GENERIC_REPORT_SIZE</td>
- *    <td>Descriptors.h</td>
- *    <td>This token defines the size of the device reports, both sent and received. The value must be an
- *        integer ranging from 1 to 255.</td>
+ *    <td>AppConfig.h</td>
+ *    <td>This token defines the size of the device reports, both sent and received (including report ID byte). The value 
+ *        must be an integer ranging from 1 to 255.</td>
  *   </tr>
  *  </table>
  */
+