X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/24e621a8d8424721ed21ce329d2a28dbf8c35343..bea72a8412f99b294c00341fa16a8308bcc66f15:/Projects/USBtoSerial/USBtoSerial.c

diff --git a/Projects/USBtoSerial/USBtoSerial.c b/Projects/USBtoSerial/USBtoSerial.c
index d7df3d91f..845c2a51c 100644
--- a/Projects/USBtoSerial/USBtoSerial.c
+++ b/Projects/USBtoSerial/USBtoSerial.c
@@ -84,21 +84,22 @@ int main(void)
 		/* Read bytes from the USB OUT endpoint into the USART transmit buffer */
 		int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
 		if (!(ReceivedByte < 0) && !(RingBuffer_IsFull(&USBtoUSART_Buffer)))
-		  RingBuffer_AtomicInsert(&USBtoUSART_Buffer, (uint8_t)ReceivedByte);		
+		  RingBuffer_Insert(&USBtoUSART_Buffer, ReceivedByte);		
 		
-		/* Check if the software USART flush timer has expired */
-		if (TIFR0 & (1 << TOV0))
+		/* Check if the UART receive buffer flush timer has expired or the buffer is nearly full */
+		RingBuff_Count_t BufferCount = RingBuffer_GetCount(&USARTtoUSB_Buffer);
+		if ((TIFR0 & (1 << TOV0)) || (BufferCount > 200))
 		{
 			TIFR0 |= (1 << TOV0);
 
 			/* Read bytes from the USART receive buffer into the USB IN endpoint */
-			while (USARTtoUSB_Buffer.Count)
-			  CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_AtomicRemove(&USARTtoUSB_Buffer));
+			while (BufferCount--)
+			  CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_Remove(&USARTtoUSB_Buffer));
 		}
 		
 		/* Load the next byte from the USART transmit buffer into the USART */
-		if (USBtoUSART_Buffer.Count)
-		  Serial_TxByte(RingBuffer_AtomicRemove(&USBtoUSART_Buffer));
+		if (!(RingBuffer_IsEmpty(&USBtoUSART_Buffer)))
+		  Serial_TxByte(RingBuffer_Remove(&USBtoUSART_Buffer));
 		
 		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
 		USB_USBTask();
@@ -138,10 +139,11 @@ void EVENT_USB_Device_Disconnect(void)
 /** Event handler for the library USB Configuration Changed event. */
 void EVENT_USB_Device_ConfigurationChanged(void)
 {
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+	bool ConfigSuccess = true;
 
-	if (!(CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface)))
-	  LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
+
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
 }
 
 /** Event handler for the library USB Unhandled Control Request event. */
@@ -205,6 +207,6 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
 	
 	/* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */
 	UCSR1C = ConfigMask;
-	UCSR1A = (1 << U2X1);	
+	UCSR1A = (1 << U2X1);
 	UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
 }