X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/229935184b3ca7eda9edd6b7d7851f53b2441a65..5f57785404e671f136f8c7e325922076d16fee30:/Projects/XPLAINBridge/XPLAINBridge.c

diff --git a/Projects/XPLAINBridge/XPLAINBridge.c b/Projects/XPLAINBridge/XPLAINBridge.c
index c08dfe980..2e8e6a89e 100644
--- a/Projects/XPLAINBridge/XPLAINBridge.c
+++ b/Projects/XPLAINBridge/XPLAINBridge.c
@@ -77,9 +77,6 @@ int main(void)
 {
 	SetupHardware();
 
-	RingBuffer_InitBuffer(&USBtoUART_Buffer);
-	RingBuffer_InitBuffer(&UARTtoUSB_Buffer);
-	
 	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
 	sei();
 
@@ -123,8 +120,8 @@ void UARTBridge_Task(void)
 	  return;
 
 	/* Read bytes from the USB OUT endpoint into the UART transmit buffer */
-	if (CDC_Device_BytesReceived(&VirtualSerial_CDC_Interface))
-	  RingBuffer_Insert(&USBtoUART_Buffer, CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface));
+	if (CDC_Device_BytesReceived(&VirtualSerial_CDC_Interface) && !(RingBuffer_IsFull(&USBtoUART_Buffer)))
+	  RingBuffer_AtomicInsert(&USBtoUART_Buffer, CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface));
 	
 	/* Check if the software UART flush timer has expired */
 	if (TIFR0 & (1 << TOV0))
@@ -133,7 +130,7 @@ void UARTBridge_Task(void)
 
 		/* Read bytes from the UART receive buffer into the USB IN endpoint */
 		while (UARTtoUSB_Buffer.Count)
-		  CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_Remove(&UARTtoUSB_Buffer));
+		  CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_AtomicRemove(&UARTtoUSB_Buffer));
 	}
 
 	CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
@@ -180,8 +177,12 @@ void EVENT_USB_Device_ConfigurationChanged(void)
 	{
 		EndpointConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
 
-		/* Configure the UART flush timer */
+		/* Configure the UART flush timer - run at Fcpu/1024 for maximum interval before overflow */
 		TCCR0B = ((1 << CS02) | (1 << CS00));
+
+		/* Initialize ring buffers used to hold serial data between USB and software UART interfaces */
+		RingBuffer_InitBuffer(&USBtoUART_Buffer);
+		RingBuffer_InitBuffer(&UARTtoUSB_Buffer);
 	}
 	else
 	{
@@ -224,6 +225,16 @@ void EVENT_USB_Device_Disconnect(void)
 	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
 }
 
+/** Event handler for the CDC Class driver Line Encoding Changed event.
+ *
+ *  \param[in] CDCInterfaceInfo  Pointer to the CDC class interface configuration structure being referenced
+ */
+void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
+{
+	/* Change the software UART's baud rate to match the new baud rate */
+	SoftUART_SetBaud(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
+}
+
 /** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
  *  documentation) by the application code so that the address and size of a requested descriptor can be given
  *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function