X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/2034141a7eb4d21a738f688b5e35a43793d17fbc..18b82b3575162c2c6d462c8f34a7d942f77a88ec:/Projects/TempDataLogger/TemperatureDataLogger.txt diff --git a/Projects/TempDataLogger/TemperatureDataLogger.txt b/Projects/TempDataLogger/TemperatureDataLogger.txt index a76748e38..01a080d87 100644 --- a/Projects/TempDataLogger/TemperatureDataLogger.txt +++ b/Projects/TempDataLogger/TemperatureDataLogger.txt @@ -3,18 +3,18 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Temperature Datalogger Project * - * \section SSec_Compat Demo Compatibility: + * \section Sec_Compat Demo Compatibility: * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs - * - Series 6 USB AVRs - * - Series 4 USB AVRs (with >16KB of FLASH) + * - Series 7 USB AVRs (AT90USBxxx7) + * - Series 6 USB AVRs (AT90USBxxx6) + * - Series 4 USB AVRs (ATMEGAxxU4) - those with >16KB of FLASH memory only * - * \section SSec_Info USB Information: + * \section Sec_Info USB Information: * * The following table gives a rundown of the USB utilization of this demo. * @@ -28,7 +28,7 @@ * Mass Storage Device \n * Human Interface Device * - * + * * USB Subclasses: * Bulk-Only Transport \n * Keyboard Subclass @@ -47,7 +47,7 @@ * * * - * \section SSec_Description Project Description: + * \section Sec_Description Project Description: * * Temperature Data Logger project. This project is a very basic USB data logger for the current temperature as reported by * the board's temperature sensor, writing the temperature to a file stored on the board's Dataflash in a FAT filesystem @@ -57,7 +57,7 @@ * * A DS1307 or compatible RTC IC is designed to be attached to the AVR's TWI bus, for the management of timestamps on the * sampled data. This project will not function correctly if the RTC chip is omitted unless the DUMMY_RTC compile time token - * is specified - see \ref SSec_Options. + * is specified - see \ref Sec_Options. * * Due to the host's need for exclusive access to the file system, the device will not log samples while connected to a host. * For the logger to store data, the Dataflash must first be formatted by the host so that it contains a valid FAT file system. @@ -65,9 +65,9 @@ * This project uses the FatFS library from ELM Chan (http://elm-chan.org/fsw/ff/00index_e.html) and the .NET HID device library * LibHIDNet (http://sourceforge.net/projects/libhidnet/). * - * \section SSec_Options Project Options + * \section Sec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * * @@ -83,3 +83,4 @@ * *
*/ +