X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/1daa5e16f9a395fb2943906a715adb35b8106988..c3dd6ac7814ce17004a9e4f0d965d606b1d7c35c:/LUFA/Drivers/USB/Core/EndpointStream.h
diff --git a/LUFA/Drivers/USB/Core/EndpointStream.h b/LUFA/Drivers/USB/Core/EndpointStream.h
index 4d4f33a20..236590d64 100644
--- a/LUFA/Drivers/USB/Core/EndpointStream.h
+++ b/LUFA/Drivers/USB/Core/EndpointStream.h
@@ -1,683 +1,124 @@
-/*
- LUFA Library
- Copyright (C) Dean Camera, 2011.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB device endpoint stream function definitions.
- *
- * This file contains structures, function prototypes and macros related to the sending and receiving of
- * arbitrary data streams through the device's data endpoints when the library is initialized in USB device mode.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_EndpointRW
- * \defgroup Group_EndpointStreamRW Read/Write of Multi-Byte Streams
- *
- * Functions, macros, variables, enums and types related to data reading and writing of data streams from
- * and to endpoints.
- *
- * @{
- */
-
-#ifndef __ENDPOINT_STREAM_H__
-#define __ENDPOINT_STREAM_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBTask.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Enums: */
- /** Enum for the possible error return codes of the \c Endpoint_*_Stream_* functions. */
- enum Endpoint_Stream_RW_ErrorCodes_t
- {
- ENDPOINT_RWSTREAM_NoError = 0, /**< Command completed successfully, no error. */
- ENDPOINT_RWSTREAM_EndpointStalled = 1, /**< The endpoint was stalled during the stream
- * transfer by the host or device.
- */
- ENDPOINT_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
- * the transfer.
- */
- ENDPOINT_RWSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and
- * no USB endpoint traffic can occur until the bus
- * has resumed.
- */
- ENDPOINT_RWSTREAM_Timeout = 4, /**< The host failed to accept or send the next packet
- * within the software timeout period set by the
- * \ref USB_STREAM_TIMEOUT_MS macro.
- */
- ENDPOINT_RWSTREAM_IncompleteTransfer = 5, /**< Indicates that the endpoint bank became full or empty before
- * the complete contents of the current stream could be
- * transferred. The endpoint stream function should be called
- * again to process the next chunk of data in the transfer.
- */
- };
-
- /** Enum for the possible error return codes of the \c Endpoint_*_Control_Stream_* functions. */
- enum Endpoint_ControlStream_RW_ErrorCodes_t
- {
- ENDPOINT_RWCSTREAM_NoError = 0, /**< Command completed successfully, no error. */
- ENDPOINT_RWCSTREAM_HostAborted = 1, /**< The aborted the transfer prematurely. */
- ENDPOINT_RWCSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
- * the transfer.
- */
- ENDPOINT_RWCSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and
- * no USB endpoint traffic can occur until the bus
- * has resumed.
- */
- };
-
- /* Function Prototypes: */
-
- /** \name Stream functions for null data */
- //@{
-
- /** Reads and discards the given number of bytes from the currently selected endpoint's bank,
- * discarding fully read packets from the host as needed. The last packet is not automatically
- * discarded once the remaining bytes has been read; the user is responsible for manually
- * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes empty while there is still data to process (and after the current
- * packet has been acknowledged) the BytesProcessed location will be updated with the total number
- * of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * Single Stream Transfer Example:
- * \code
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Discard_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * Partial Stream Transfers Example:
- * \code
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Discard_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Length Number of bytes to discard via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Discard_Stream(uint16_t Length,
- uint16_t* const BytesProcessed);
-
- /** Writes a given number of zeroed bytes to the currently selected endpoint's bank, sending
- * full packets to the host as needed. The last packet is not automatically sent once the
- * remaining bytes have been written; the user is responsible for manually sending the last
- * packet to the host via the \ref Endpoint_ClearIN() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes full while there is still data to process (and after the current
- * packet transmission has been initiated) the BytesProcessed location will be updated with the
- * total number of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * Single Stream Transfer Example:
- * \code
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Null_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * Partial Stream Transfers Example:
- * \code
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Null_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Length Number of zero bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Null_Stream(uint16_t Length,
- uint16_t* const BytesProcessed);
-
- //@}
-
- /** \name Stream functions for RAM source/destination data */
- //@{
-
- /** Writes the given number of bytes to the endpoint from the given buffer in little endian,
- * sending full packets to the host as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Endpoint_ClearIN() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes full while there is still data to process (and after the current
- * packet transmission has been initiated) the BytesProcessed location will be updated with the
- * total number of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * Single Stream Transfer Example:
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream),
- * NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * Partial Stream Transfers Example:
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream),
- * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Stream_LE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the endpoint from the given buffer in big endian,
- * sending full packets to the host as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Endpoint_ClearIN() macro.
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Stream_BE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the endpoint from the given buffer in little endian,
- * discarding fully read packets from the host as needed. The last packet is not automatically
- * discarded once the remaining bytes has been read; the user is responsible for manually
- * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes empty while there is still data to process (and after the current
- * packet has been acknowledged) the BytesProcessed location will be updated with the total number
- * of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * Single Stream Transfer Example:
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream),
- * NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * Partial Stream Transfers Example:
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream),
- * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Stream_LE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the endpoint from the given buffer in big endian,
- * discarding fully read packets from the host as needed. The last packet is not automatically
- * discarded once the remaining bytes has been read; the user is responsible for manually
- * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro.
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Stream_BE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
- * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the setup OUT to
- * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_Stream_LE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,
- * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the setup OUT to
- * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_Stream_BE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,
- * discarding fully read packets from the host as needed. The device IN acknowledgement is not
- * automatically sent after success or failure states; the user is responsible for manually sending the
- * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_Stream_LE(void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,
- * discarding fully read packets from the host as needed. The device IN acknowledgement is not
- * automatically sent after success or failure states; the user is responsible for manually sending the
- * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_Stream_BE(void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
- //@}
-
- /** \name Stream functions for EEPROM source/destination data */
- //@{
-
- /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE().
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_EStream_LE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE().
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_EStream_BE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Read_Stream_LE().
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_EStream_LE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Read_Stream_BE().
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_EStream_BE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of Endpoint_Write_Control_Stream_LE.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_EStream_LE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Write_Control_Stream_BE().
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_EStream_BE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_LE().
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_EStream_LE(void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_BE().
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_EStream_BE(void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
- //@}
-
- /** \name Stream functions for PROGMEM source/destination data */
- //@{
-
- /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_PStream_LE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** FLASH buffer source version of \ref Endpoint_Write_Stream_BE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_PStream_BE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_PStream_LE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_PStream_BE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
- //@}
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Endpoint data stream transmission and reception management.
+ * \copydetails Group_EndpointStreamRW
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the USB driver
+ * dispatch header located in LUFA/Drivers/USB/USB.h.
+ */
+
+/** \ingroup Group_EndpointRW
+ * \defgroup Group_EndpointStreamRW Read/Write of Multi-Byte Streams
+ * \brief Endpoint data stream transmission and reception management.
+ *
+ * Functions, macros, variables, enums and types related to data reading and writing of data streams from
+ * and to endpoints.
+ *
+ * @{
+ */
+
+#ifndef __ENDPOINT_STREAM_H__
+#define __ENDPOINT_STREAM_H__
+
+ /* Includes: */
+ #include "../../../Common/Common.h"
+ #include "USBMode.h"
+
+ /* Enable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ extern "C" {
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+ /* Public Interface - May be used in end-application: */
+ /* Enums: */
+ /** Enum for the possible error return codes of the \c Endpoint_*_Stream_* functions. */
+ enum Endpoint_Stream_RW_ErrorCodes_t
+ {
+ ENDPOINT_RWSTREAM_NoError = 0, /**< Command completed successfully, no error. */
+ ENDPOINT_RWSTREAM_EndpointStalled = 1, /**< The endpoint was stalled during the stream
+ * transfer by the host or device.
+ */
+ ENDPOINT_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
+ * the transfer.
+ */
+ ENDPOINT_RWSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and
+ * no USB endpoint traffic can occur until the bus
+ * has resumed.
+ */
+ ENDPOINT_RWSTREAM_Timeout = 4, /**< The host failed to accept or send the next packet
+ * within the software timeout period set by the
+ * \ref USB_STREAM_TIMEOUT_MS macro.
+ */
+ ENDPOINT_RWSTREAM_IncompleteTransfer = 5, /**< Indicates that the endpoint bank became full or empty before
+ * the complete contents of the current stream could be
+ * transferred. The endpoint stream function should be called
+ * again to process the next chunk of data in the transfer.
+ */
+ };
+
+ /** Enum for the possible error return codes of the \c Endpoint_*_Control_Stream_* functions. */
+ enum Endpoint_ControlStream_RW_ErrorCodes_t
+ {
+ ENDPOINT_RWCSTREAM_NoError = 0, /**< Command completed successfully, no error. */
+ ENDPOINT_RWCSTREAM_HostAborted = 1, /**< The aborted the transfer prematurely. */
+ ENDPOINT_RWCSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
+ * the transfer.
+ */
+ ENDPOINT_RWCSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and
+ * no USB endpoint traffic can occur until the bus
+ * has resumed.
+ */
+ };
+
+ /* Architecture Includes: */
+ #if (ARCH == ARCH_AVR8)
+ #include "AVR8/EndpointStream_AVR8.h"
+ #elif (ARCH == ARCH_UC3)
+ #include "UC3/EndpointStream_UC3.h"
+ #elif (ARCH == ARCH_XMEGA)
+ #include "XMEGA/EndpointStream_XMEGA.h"
+ #endif
+
+ /* Disable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ }
+ #endif
+
+#endif
+
+/** @} */