X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/1daa5e16f9a395fb2943906a715adb35b8106988..77a9df36a77d2523dd2bc24fa17f9f04c6c175c5:/LUFA/Drivers/USB/Core/USBMode.h diff --git a/LUFA/Drivers/USB/Core/USBMode.h b/LUFA/Drivers/USB/Core/USBMode.h index 58f9927dc..189dd6ee0 100644 --- a/LUFA/Drivers/USB/Core/USBMode.h +++ b/LUFA/Drivers/USB/Core/USBMode.h @@ -29,11 +29,8 @@ */ /** \file - * \brief USB mode and capability macros. - * - * This file defines macros indicating the type of USB controller the library is being compiled for, and its - * capabilities. These macros may then be referenced in the user application to selectively enable or disable - * code sections depending on if they are defined or not. + * \brief USB mode and feature support definitions. + * \copydetails Group_USBMode * * \note This file should not be included directly. It is automatically included as needed by the USB driver * dispatch header located in LUFA/Drivers/USB/USB.h. @@ -41,11 +38,15 @@ /** \ingroup Group_USB * \defgroup Group_USBMode USB Mode Tokens + * \brief USB mode and feature support definitions. + * + * This file defines macros indicating the type of USB controller the library is being compiled for, and its + * capabilities. These macros may then be referenced in the user application to selectively enable or disable + * code sections depending on if they are defined or not. * - * After the inclusion of the master USB driver header, one or more of the following - * tokens may be defined, to allow the user code to conditionally enable or disable - * code based on the USB controller family and allowable USB modes. These tokens may - * be tested against to eliminate code relating to a USB mode which is not enabled for + * After the inclusion of the master USB driver header, one or more of the following tokens may be defined, to + * allow the user code to conditionally enable or disable code based on the USB controller family and allowable + * USB modes. These tokens may be tested against to eliminate code relating to a USB mode which is not enabled for * the given compilation. * * @{ @@ -54,6 +55,11 @@ #ifndef __USBMODE_H__ #define __USBMODE_H__ + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + /* Preprocessor Checks: */ #if !defined(__INCLUDE_FROM_USB_DRIVER) #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. @@ -61,37 +67,62 @@ /* Public Interface - May be used in end-application: */ #if defined(__DOXYGEN__) - /** Indicates that the target AVR microcontroller belongs to the Series 2 USB controller + /** Indicates that the target AVR microcontroller belongs to the Series 2 AVR8 USB controller * (i.e. AT90USBxxx2 or ATMEGAxxU2) when defined. */ #define USB_SERIES_2_AVR - /** Indicates that the target AVR microcontroller belongs to the Series 4 USB controller + /** Indicates that the target AVR microcontroller belongs to the Series 4 AVR8 USB controller * (i.e. ATMEGAxxU4) when defined. */ #define USB_SERIES_4_AVR - /** Indicates that the target AVR microcontroller belongs to the Series 6 USB controller + /** Indicates that the target AVR microcontroller belongs to the Series 6 AVR8 USB controller * (i.e. AT90USBxxx6) when defined. */ #define USB_SERIES_6_AVR - /** Indicates that the target AVR microcontroller belongs to the Series 7 USB controller + /** Indicates that the target AVR microcontroller belongs to the Series 7 AVR8 USB controller * (i.e. AT90USBxxx7) when defined. */ #define USB_SERIES_7_AVR - /** Indicates that the target AVR microcontroller and compilation settings allow for the + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A0 Series USB controller + * (i.e. AT32UC3A0*) when defined. + */ + #define USB_SERIES_UC3A0_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A1 Series USB controller + * (i.e. AT32UC3A1*) when defined. + */ + #define USB_SERIES_UC3A1_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A3 Series USB controller + * (i.e. AT32UC3A3*) when defined. + */ + #define USB_SERIES_UC3A3_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B0 Series USB controller + * (i.e. AT32UC3B0*) when defined. + */ + #define USB_SERIES_UC3B0_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B1 Series USB controller + * (i.e. AT32UC3B1*) when defined. + */ + #define USB_SERIES_UC3B1_AVR + + /** Indicates that the target microcontroller and compilation settings allow for the * target to be configured in USB Device mode when defined. */ #define USB_CAN_BE_DEVICE - /** Indicates that the target AVR microcontroller and compilation settings allow for the + /** Indicates that the target microcontroller and compilation settings allow for the * target to be configured in USB Host mode when defined. */ #define USB_CAN_BE_HOST - /** Indicates that the target AVR microcontroller and compilation settings allow for the + /** Indicates that the target microcontroller and compilation settings allow for the * target to be configured in either USB Device or Host mode when defined. */ #define USB_CAN_BE_BOTH @@ -100,39 +131,100 @@ #if (defined(__AVR_AT90USB162__) || defined(__AVR_AT90USB82__) || \ defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__)) #define USB_SERIES_2_AVR + #define USB_CAN_BE_DEVICE #elif (defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__)) #define USB_SERIES_4_AVR + #define USB_CAN_BE_DEVICE #elif (defined(__AVR_ATmega32U6__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)) #define USB_SERIES_6_AVR + #define USB_CAN_BE_DEVICE #elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__)) #define USB_SERIES_7_AVR - #endif - - #if !defined(USB_SERIES_7_AVR) - #if defined(USB_HOST_ONLY) - #error USB_HOST_ONLY is not available for the currently selected USB AVR model. - #endif - - #if !defined(USB_DEVICE_ONLY) - #define USB_DEVICE_ONLY - #endif - #endif - - #if (!defined(USB_DEVICE_ONLY) && !defined(USB_HOST_ONLY)) - #define USB_CAN_BE_BOTH + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3A0512__) || defined(__AVR32_UC3A0256__) || \ + defined(__AVR32_UC3A0128__) || defined(__AVR32_UC3A064__)) + #define USB_SERIES_UC3A0_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3A1512__) || defined(__AVR32_UC3A1256__) || \ + defined(__AVR32_UC3A1128__) || defined(__AVR32_UC3A164__)) + #define USB_SERIES_UC3A1_AVR32 + #define USB_CAN_BE_DEVICE #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3A3256__) || defined(__AVR32_UC3A3256S__) || \ + defined(__AVR32_UC3A3128__) || defined(__AVR32_UC3A3128S__) || \ + defined(__AVR32_UC3A364__) || defined(__AVR32_UC3A364S__)) + #define USB_SERIES_UC3A3_AVR32 #define USB_CAN_BE_DEVICE - #elif defined(USB_HOST_ONLY) #define USB_CAN_BE_HOST - #elif defined(USB_DEVICE_ONLY) + #elif (defined(__AVR32_UC3A4256__) || defined(__AVR32_UC3A4256S__) || \ + defined(__AVR32_UC3A4128__) || defined(__AVR32_UC3A4128S__) || \ + defined(__AVR32_UC3A464__) || defined(__AVR32_UC3A464S__)) + #define USB_SERIES_UC3A4_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3B0512__) || defined(__AVR32_UC3B0256__) || \ + defined(__AVR32_UC3B0128__) || defined(__AVR32_UC3B064__)) + #define USB_SERIES_UC3B0_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3B1512__) || defined(__AVR32_UC3B1256__) || \ + defined(__AVR32_UC3B1128__) || defined(__AVR32_UC3B164__)) + #define USB_SERIES_UC3B1_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR_ATxmega128A1U__)) + #define USB_SERIES_A1U_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega16A4U__) || defined(__AVR_ATxmega32A4U__)) + #define USB_SERIES_A4U_XMEGA #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega64A3U__) || defined(__AVR_ATxmega128A3U__) || \ + defined(__AVR_ATxmega192A3U__) || defined(__AVR_ATxmega256A3U__)) + #define USB_SERIES_A3U_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega256A3BU__)) + #define USB_SERIES_A3BU_XMEGA + #define USB_CAN_BE_DEVICE + #endif + + #if (defined(USB_CAN_BE_DEVICE) && defined(USB_CAN_BE_HOST)) + #define USB_CAN_BE_BOTH + #endif + + #if defined(USB_HOST_ONLY) + #if !defined(USB_CAN_BE_HOST) + #error USB_HOST_ONLY is not available for the currently selected microcontroller model. + #else + #undef USB_CAN_BE_DEVICE + #undef USB_CAN_BE_BOTH + #endif #endif + #if defined(USB_DEVICE_ONLY) + #if !defined(USB_CAN_BE_DEVICE) + #error USB_DEVICE_ONLY is not available for the currently selected microcontroller model. + #else + #undef USB_CAN_BE_HOST + #undef USB_CAN_BE_BOTH + #endif + #endif + #if (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY)) #error USB_HOST_ONLY and USB_DEVICE_ONLY are mutually exclusive. #endif + + #if (!defined(USB_CAN_BE_DEVICE) && !defined(USB_CAN_BE_HOST)) + #error The currently selected device or architecture is not supported under the USB component of the library. + #endif #endif + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + #endif /** @} */