X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/1c16ae399a9f924c15d9dec54cacb1320ff0a92f..f9f1bcc25c17b031029200cd9648d76d4ee39dc4:/LUFA/Drivers/Board/Temperature.h

diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h
index 7069e3e99..f4ecf71b7 100644
--- a/LUFA/Drivers/Board/Temperature.h
+++ b/LUFA/Drivers/Board/Temperature.h
@@ -36,7 +36,15 @@
 /** \ingroup Group_BoardDrivers
  *  @defgroup Group_Temperature Temperature Driver - LUFA/Drivers/Board/Temperature.h
  *
- *  Functions, macros, variables, enums and types related to the control of board temperature sensors.
+ *  \section Sec_Dependencies Module Source Dependencies
+ *  The following files must be built with any user project that uses this module:
+ *    - LUFA/Drivers/Board/Temperature.c
+ *
+ *  \section Module Description
+ *  Temperature sensor driver. This provides an easy to use interface for the hardware temperature sensor located
+ *  on many boards. It provides an interface to configure the sensor and appropriate ADC channel, plus read out the
+ *  current temperature in degrees C. It is designed for and will only work with the temperature sensor located on the
+ *  official Atmel USB AVR boards, as each sensor has different characteristics.
  *
  *  @{
  */
@@ -56,8 +64,8 @@
 		#include "../Peripheral/ADC.h"
 	
 		#if !defined(BOARD)
-			#error #error BOARD must be set in makefile to a value specified in BoardTypes.h.	
-		#elif (BOARD != BOARD_USBKEY) && (BOARD != BOARD_STK525) && (BOARD != BOARD_STK526)
+			#error BOARD must be set in makefile to a value specified in BoardTypes.h.	
+		#elif (BOARD != BOARD_USBKEY) && (BOARD != BOARD_STK525) && (BOARD != BOARD_STK526) && (BOARD != BOARD_USER)
 			#error The selected board does not contain a temperature sensor.
 		#endif
 
@@ -71,13 +79,13 @@
 			/** ADC channel number for the temperature sensor. */
 			#define TEMP_ADC_CHANNEL   0
 			
-			/** Minimum returnable temperature from the Temperature_GetTemperature() function. */
+			/** Minimum returnable temperature from the \ref Temperature_GetTemperature() function. */
 			#define TEMP_MIN_TEMP      TEMP_TABLE_OFFSET
 
-			/** Maximum returnable temperature from the Temperature_GetTemperature() function. */
+			/** Maximum returnable temperature from the \ref Temperature_GetTemperature() function. */
 			#define TEMP_MAX_TEMP      ((TEMP_TABLE_SIZE - 1) + TEMP_TABLE_OFFSET)
 		
-		/* Psuedo-Functions: */
+		/* Pseudo-Function Macros: */
 			#if defined(__DOXYGEN__)
 				/** Initializes the temperature sensor driver, including setting up the appropriate ADC channel.
 				 *  This must be called before any other temperature sensor routines.
@@ -92,7 +100,7 @@
 
 		/* Function Prototypes: */
 			/** Performs a complete ADC on the temperature sensor channel, and converts the result into a
-			 *  valid temperature between TEMP_MIN_TEMP and TEMP_MAX_TEMP in degrees Celsius.
+			 *  valid temperature between \ref TEMP_MIN_TEMP and \ref TEMP_MAX_TEMP in degrees Celsius.
 			 *
 			 *  \return Signed temperature in degrees Celsius
 			 */