X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/1a4a26271e32fba6e2430b7869ec4a8b4242e6e2..cc959c945b8002ece6c47e86af012112dd2535b3:/Bootloaders/CDC/BootloaderCDC.txt

diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt
index ab45ad1b8..618b95d25 100644
--- a/Bootloaders/CDC/BootloaderCDC.txt
+++ b/Bootloaders/CDC/BootloaderCDC.txt
@@ -47,9 +47,9 @@
  *  This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109
  *  protocol compatible programming software to load firmware onto the AVR.
  *
- *  Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If
- *  you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU
- *  values in the accompanying makefile.
+ *  Out of the box this bootloader builds for the AT90USB1287 with an 8KB bootloader section size, and will fit
+ *  into 4KB of bootloader space. If you wish to alter this size and/or change the AVR model, you will need to
+ *  edit the MCU, FLASH_SIZE_KB and BOOT_SECTION_SIZE_KB values in the accompanying makefile.
  *
  *  When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the
  *  bootloader from the normal user application.
@@ -95,22 +95,43 @@
  *  following layout:
  *
  *  \code
- *  #define BOOTLOADER_API_START(Index)        (void*)(((FLASHEND - 32) + (2 * Index)) / 2)
- *  void    (*BootloaderAPI_ErasePage)(uint32_t Address)               = BOOTLOADER_API_START(0);
- *  void    (*BootloaderAPI_WritePage)(uint32_t Address)               = BOOTLOADER_API_START(1);
- *  void    (*BootloaderAPI_FillWord)(uint32_t Address, uint16_t Word) = BOOTLOADER_API_START(2);
- *  uint8_t (*BootloaderAPI_ReadSignature)(uint16_t Address)           = BOOTLOADER_API_START(3);
- *  uint8_t (*BootloaderAPI_ReadFuse)(uint16_t Address)                = BOOTLOADER_API_START(4);
- *  uint8_t (*BootloaderAPI_ReadLock)(void)                            = BOOTLOADER_API_START(5);
- *  void    (*BootloaderAPI_WriteLock)(uint8_t LockBits)               = BOOTLOADER_API_START(6);
+ *  #define BOOTLOADER_API_CALL(Index)        (void*)(((FLASHEND - 32) + (2 * Index)) / 2)
+ *
+ *  void    (*BootloaderAPI_ErasePage)(uint32_t Address)               = BOOTLOADER_API_CALL(0);
+ *  void    (*BootloaderAPI_WritePage)(uint32_t Address)               = BOOTLOADER_API_CALL(1);
+ *  void    (*BootloaderAPI_FillWord)(uint32_t Address, uint16_t Word) = BOOTLOADER_API_CALL(2);
+ *  uint8_t (*BootloaderAPI_ReadSignature)(uint16_t Address)           = BOOTLOADER_API_CALL(3);
+ *  uint8_t (*BootloaderAPI_ReadFuse)(uint16_t Address)                = BOOTLOADER_API_CALL(4);
+ *  uint8_t (*BootloaderAPI_ReadLock)(void)                            = BOOTLOADER_API_CALL(5);
+ *  void    (*BootloaderAPI_WriteLock)(uint8_t LockBits)               = BOOTLOADER_API_CALL(6);
+ *
+ *  #define BOOTLOADER_MAGIC_SIGNATURE_START   (FLASHEND - 2)
+ *  #define BOOTLOADER_MAGIC_SIGNATURE         0xDCFB
+ *
+ *  #define BOOTLOADER_CLASS_SIGNATURE_START   (FLASHEND - 4)
+ *  #define BOOTLOADER_CDC_SIGNATURE           0xCDC1
+ *
+ *  #define BOOTLOADER_ADDRESS_START           (FLASHEND - 8)
+ *  #define BOOTLOADER_ADDRESS_LENGTH          4
  *  \endcode
  *
+ *  Bootloaders reporting a device release revision number of 1.00 or greater are bootloader API enabled. From the application
+ *  the API support of the bootloader can be detected by reading the FLASH memory bytes located at address \c BOOTLOADER_MAGIC_SIGNATURE_START
+ *  and comparing them to the value \c BOOTLOADER_MAGIC_SIGNATURE. The class of bootloader can be determined by reading the
+ *  FLASH memory bytes located at address \c BOOTLOADER_CLASS_SIGNATURE_START and comparing them to the value \c BOOTLOADER_CDC_SIGNATURE.
+ *  The start address of the bootloader can be retrieved by reading the bytes of FLASH memory starting from address \c BOOTLOADER_ADDRESS_START.
+ *
  *  \section Sec_Options Project Options
  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *
  *  <table>
  *   <tr>
+ *    <td><b>Define Name:</b></td>
+ *    <td><b>Location:</b></td>
+ *    <td><b>Description:</b></td>
+ *   </tr>
+ *   <tr>
  *    <td>NO_BLOCK_SUPPORT</td>
  *    <td>Makefile LUFA_OPTS</td>
  *    <td>Define to disable memory block read/write support in the bootloader, requiring all reads and writes to be made