X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/18b82b3575162c2c6d462c8f34a7d942f77a88ec..5f709e281eec223c5de9766a99bdd54339e149cb:/Projects/XPLAINBridge/XPLAINBridge.txt

diff --git a/Projects/XPLAINBridge/XPLAINBridge.txt b/Projects/XPLAINBridge/XPLAINBridge.txt
index 52cf99fac..bc0ca37d8 100644
--- a/Projects/XPLAINBridge/XPLAINBridge.txt
+++ b/Projects/XPLAINBridge/XPLAINBridge.txt
@@ -10,7 +10,7 @@
  *
  *  The following list indicates what microcontrollers are compatible with this project.
  *
- *  - AT90USB1287
+ *  \li AT90USB1287
  *
  *  \section Sec_Info USB Information:
  *
@@ -38,7 +38,7 @@
  *    <td>2) Atmel AVRISP MKII Protocol Specification</td>
  *   </tr>
  *   <tr>
- *    <td><b>Usable Speeds:</b></td>
+ *    <td><b>Supported USB Speeds:</b></td>
  *    <td>1) Full Speed Mode</td>
  *    <td>2) Full Speed Mode</td>
  *   </tr>
@@ -79,18 +79,28 @@
  *    <td><b>Description:</b></td>
  *   </tr>
  *   <tr>
- *    <td>BUFFER_SIZE</td>
- *    <td>LightweightRingBuff.h</td>
- *    <td>Defines the maximum number of bytes which can be buffered in each Ring Buffer when in serial bridge mode.</td>
+ *    <td>LIBUSB_DRIVER_COMPAT</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making
+ *        the code compatible with software such as avrdude (all platforms) that use the libUSB driver.
+ *
+ *        \note This option is incompatible with \c RESET_TOGGLES_LIBUSB_COMPAT.</td>
  *   </tr>
  *   <tr>
- *    <td>LIBUSB_DRIVER_COMPAT</td>
+ *    <td>RESET_TOGGLES_LIBUSB_COMPAT</td>
  *    <td>Makefile LUFA_OPTS</td>
- *    <td>Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making
- *        the code compatible with software such as avrdude (all platforms) that use the libUSB driver.</td>
+ *    <td>Define to make the /RESET line of the AVR toggle between Jungo and libUSB driver compatibility modes. Each time the AVR is
+ *        reset externally via the reset pin, the compatibility mode will be toggled. The compatibility mode is preserved between
+ *        power cycles and is not toggled via other forms of reset such as Watchdog or Brown Out.
+ *
+ *        When this option is enabled, all board LEDs will flash twice on startup for Jungo compatibility mode, and five times for
+ *        libUSB compatibility mode.
+ *
+ *        \note This option is incompatible with \c LIBUSB_DRIVER_COMPAT.</td>
  *   </tr>
  *   <tr>
  *    <td>FIRMWARE_VERSION_MINOR</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible
  *        with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here.</td>
  *   </tr>