X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/12a01ed72d0d6dbf243160302314870e7b29cc07..fd96b288824caaa3ee4e5e03887f016de9df80cf:/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c?ds=inline

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
index 805eaa31f..ef86e30f2 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
@@ -65,6 +65,7 @@ void XPROGProtocol_SetMode(void)
 	Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params), NO_STREAM_CALLBACK);
 
 	Endpoint_ClearOUT();
+	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
 	
 	XPROG_SelectedProtocol = SetMode_XPROG_Params.Protocol;
@@ -111,6 +112,7 @@ void XPROGProtocol_Command(void)
 static void XPROGProtocol_EnterXPROGMode(void)
 {
 	Endpoint_ClearOUT();
+	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
 	
 	bool NVMBusEnabled;
@@ -119,7 +121,7 @@ static void XPROGProtocol_EnterXPROGMode(void)
 	{
 		/* Enable PDI programming mode with the attached target */
 		XPROGTarget_EnableTargetPDI();
-		
+
 		/* Store the RESET key into the RESET PDI register to keep the XMEGA in reset */
 		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);	
 		XPROGTarget_SendByte(PDI_RESET_KEY);
@@ -166,10 +168,13 @@ static void XPROGProtocol_EnterXPROGMode(void)
 static void XPROGProtocol_LeaveXPROGMode(void)
 {
 	Endpoint_ClearOUT();
+	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
 	
 	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
 	{
+		XMEGANVM_WaitWhileNVMBusBusy();
+
 		/* Clear the RESET key in the RESET PDI register to allow the XMEGA to run */
 		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);	
 		XPROGTarget_SendByte(0x00);
@@ -178,6 +183,8 @@ static void XPROGProtocol_LeaveXPROGMode(void)
 	}
 	else
 	{
+		TINYNVM_WaitWhileNVMBusBusy();
+
 		/* Clear the NVMEN bit in the TPI CONTROL register to disable TPI mode */
 		XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);	
 		XPROGTarget_SendByte(0x00);
@@ -206,6 +213,7 @@ static void XPROGProtocol_Erase(void)
 	Erase_XPROG_Params.Address = SwapEndian_32(Erase_XPROG_Params.Address);
 
 	Endpoint_ClearOUT();
+	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
 	
 	uint8_t EraseCommand;
@@ -287,6 +295,7 @@ static void XPROGProtocol_WriteMemory(void)
 	Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length, NO_STREAM_CALLBACK);
 
 	Endpoint_ClearOUT();
+	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
 
 	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
@@ -370,6 +379,7 @@ static void XPROGProtocol_ReadMemory(void)
 	ReadMemory_XPROG_Params.Length  = SwapEndian_16(ReadMemory_XPROG_Params.Length);
 
 	Endpoint_ClearOUT();
+	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
 
 	uint8_t ReadBuffer[256];
@@ -412,6 +422,7 @@ static void XPROGProtocol_ReadCRC(void)
 	Endpoint_Read_Stream_LE(&ReadCRC_XPROG_Params, sizeof(ReadCRC_XPROG_Params), NO_STREAM_CALLBACK);
 
 	Endpoint_ClearOUT();
+	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
 	
 	uint32_t MemoryCRC;
@@ -487,6 +498,7 @@ static void XPROGProtocol_SetParam(void)
 	}
 
 	Endpoint_ClearOUT();
+	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
 		  
 	Endpoint_Write_Byte(CMD_XPROG);