X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/0f45b9c8e076483cd546d0bc9c606b73455295c6..5cae54154506176d64a581c5b3d9550c901b570c:/Projects/TempDataLogger/TemperatureDataLogger.txt?ds=inline

diff --git a/Projects/TempDataLogger/TemperatureDataLogger.txt b/Projects/TempDataLogger/TemperatureDataLogger.txt
index f15733850..4d4e0b5e8 100644
--- a/Projects/TempDataLogger/TemperatureDataLogger.txt
+++ b/Projects/TempDataLogger/TemperatureDataLogger.txt
@@ -3,18 +3,18 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /** \mainpage Temperature Datalogger Project
  *
- *  \section SSec_Compat Demo Compatibility:
+ *  \section Sec_Compat Demo Compatibility:
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
- *  - Series 7 USB AVRs
- *  - Series 6 USB AVRs
- *  - Series 4 USB AVRs (with >16KB of FLASH)
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4) - <i>those with >16KB of FLASH memory only</i>
  *
- *  \section SSec_Info USB Information:
+ *  \section Sec_Info USB Information:
  *
  *  The following table gives a rundown of the USB utilization of this demo.
  *
@@ -28,7 +28,7 @@
  *    <td>Mass Storage Device \n
  *        Human Interface Device</td>
  *   </tr>
- *   <tr> 
+ *   <tr>
  *    <td><b>USB Subclasses:</b></td>
  *    <td>Bulk-Only Transport \n
  *        Keyboard Subclass</td>
@@ -42,12 +42,12 @@
  *        USBIF HID Specification, USBIF HID Usage Tables</td>
  *   </tr>
  *   <tr>
- *    <td><b>Usable Speeds:</b></td>
+ *    <td><b>Supported USB Speeds:</b></td>
  *    <td>Full Speed Mode</td>
  *   </tr>
  *  </table>
  *
- *  \section SSec_Description Project Description: 
+ *  \section Sec_Description Project Description:
  *
  *  Temperature Data Logger project. This project is a very basic USB data logger for the current temperature as reported by
  *  the board's temperature sensor, writing the temperature to a file stored on the board's Dataflash in a FAT filesystem
@@ -57,7 +57,7 @@
  *
  *  A DS1307 or compatible RTC IC is designed to be attached to the AVR's TWI bus, for the management of timestamps on the
  *  sampled data. This project will not function correctly if the RTC chip is omitted unless the DUMMY_RTC compile time token
- *  is specified - see \ref SSec_Options.
+ *  is specified - see \ref Sec_Options.
  *
  *  Due to the host's need for exclusive access to the file system, the device will not log samples while connected to a host.
  *  For the logger to store data, the Dataflash must first be formatted by the host so that it contains a valid FAT file system.
@@ -65,21 +65,22 @@
  *  This project uses the FatFS library from ELM Chan (http://elm-chan.org/fsw/ff/00index_e.html) and the .NET HID device library
  *  LibHIDNet (http://sourceforge.net/projects/libhidnet/).
  *
- *  \section SSec_Options Project Options
+ *  \section Sec_Options Project Options
  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *
  *  <table>
  *   <tr>
- *    <td><b>Define Name:</b></td>
- *    <td><b>Location:</b></td>
- *    <td><b>Description:</b></td>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
  *   </tr>
  *   <tr>
  *    <td>DUMMY_RTC</td>
- *    <td>Makefile LUFA_OPTS</td>
- *    <td>When a DS1307 RTC chip is not fitted, this token can be defined to make the demo assume a 1/1/1 01:01:01 date/time
- *        stamp at all times, effectively transforming the project into a basic data logger with no specified sample times.</td>
+ *    <td>AppConfig.h</td>
+ *    <td>When a DS1307 RTC chip is not fitted, this token can be defined to make the demo use a dummy software RTC using the system
+ *        clock. This is less accurate and does not store the set time and date into non-volatile memory.</td>
  *   </tr>
  *  </table>
  */
+