X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/071e02c6b6b4837fa9cf0b6d4c749994e02638d7..f1b6ddb7107fd9534cc6a8d6ab2d46f349d9cdb7:/Projects/RelayBoard/makefile

diff --git a/Projects/RelayBoard/makefile b/Projects/RelayBoard/makefile
index ae286c61e..1ea3902ac 100644
--- a/Projects/RelayBoard/makefile
+++ b/Projects/RelayBoard/makefile
@@ -60,13 +60,17 @@
 
 
 # MCU name
-MCU = at90usb1286
+MCU = at90usb1287
+
+
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
 
 
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
 # "Board" inside the application directory.
-BOARD  = TEENSY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -75,16 +79,16 @@ BOARD  = TEENSY
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
-#     This will be an integer division of F_CLOCK below, as it is sourced by
-#     F_CLOCK after it has run through any CPU prescalers. Note that this value
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
-F_CPU = 16000000
+F_CPU = 8000000
 
 
 # Input clock frequency.
-#     This will define a symbol, F_CLOCK, in all source code files equal to the
+#     This will define a symbol, F_USB, in all source code files equal to the
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -94,7 +98,7 @@ F_CPU = 16000000
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_CLOCK = $(F_CPU)
+F_USB = $(F_CPU)
 
 
 # Output format. (can be srec, ihex, binary)
@@ -115,28 +119,25 @@ OBJDIR = .
 LUFA_PATH = ../..
 
 
-# LUFA library compile-time options
+# LUFA library compile-time options and predefined tokens
 LUFA_OPTS  = -D USB_DEVICE_ONLY
+LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
+LUFA_OPTS += -D ORDERED_EP_CONFIG
 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D CONTROL_ONLY_DEVICE
 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
+LUFA_OPTS += -D CONTROL_ONLY_DEVICE
 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 
 
+# Create the LUFA source path variables by including the LUFA root makefile
+include $(LUFA_PATH)/LUFA/makefile
+
+
 # List C source files here. (C dependencies are automatically generated.)
 SRC = $(TARGET).c                                                 \
 	  Descriptors.c                                               \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c        \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c           \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c               \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c       \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \
- 	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/USBInterrupt.c       \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
+	  $(LUFA_SRC_USB)
 
 
 # List C++ source files here. (C dependencies are automatically generated.)
@@ -178,18 +179,27 @@ EXTRAINCDIRS = $(LUFA_PATH)/
 #     gnu89 = c89 plus GCC extensions
 #     c99   = ISO C99 standard (not yet fully implemented)
 #     gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu99
+CSTANDARD = -std=c99
 
 
 # Place -D or -U options here for C sources
-CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
+CDEFS  = -DF_CPU=$(F_CPU)UL
+CDEFS += -DF_USB=$(F_USB)UL
+CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
+CDEFS += $(LUFA_OPTS)
 
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
 
+# Place -D or -U options here for ASM sources
+ADEFS  = -DF_CPU=$(F_CPU)
+ADEFS += -DF_USB=$(F_USB)UL
+ADEFS += -DBOARD=BOARD_$(BOARD)
+ADEFS += $(LUFA_OPTS)
 
 # Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
+CPPDEFS  = -DF_CPU=$(F_CPU)UL
+CPPDEFS += -DF_USB=$(F_USB)UL
+CPPDEFS += -DBOARD=BOARD_$(BOARD)
+CPPDEFS += $(LUFA_OPTS)
 #CPPDEFS += -D__STDC_LIMIT_MACROS
 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 
@@ -207,14 +217,16 @@ CFLAGS += $(CDEFS)
 CFLAGS += -O$(OPT)
 CFLAGS += -funsigned-char
 CFLAGS += -funsigned-bitfields
+CFLAGS += -ffunction-sections
 CFLAGS += -fno-inline-small-functions
 CFLAGS += -fpack-struct
 CFLAGS += -fshort-enums
-CFLAGS += -ffunction-sections
+CFLAGS += -fno-strict-aliasing
 CFLAGS += -Wall
 CFLAGS += -Wstrict-prototypes
-CFLAGS += -Wundef
+#CFLAGS += -mshort-calls
 #CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
 #CFLAGS += -Wunreachable-code
 #CFLAGS += -Wsign-compare
 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
@@ -238,7 +250,7 @@ CPPFLAGS += -fpack-struct
 CPPFLAGS += -fshort-enums
 CPPFLAGS += -fno-exceptions
 CPPFLAGS += -Wall
-CFLAGS += -Wundef
+CPPFLAGS += -Wundef
 #CPPFLAGS += -mshort-calls
 #CPPFLAGS += -fno-unit-at-a-time
 #CPPFLAGS += -Wstrict-prototypes
@@ -315,7 +327,7 @@ EXTMEMOPTS =
 #  -Wl,...:     tell GCC to pass this to linker.
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file
-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
 LDFLAGS += -Wl,--relax
 LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
@@ -327,9 +339,7 @@ LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 
 #---------------- Programming Options (avrdude) ----------------
 
-# Programming hardware: alf avr910 avrisp bascom bsd
-# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
-#
+# Programming hardware
 # Type: avrdude -c ?
 # to get a full listing.
 #
@@ -409,6 +419,7 @@ REMOVEDIR = rm -rf
 COPY = cp
 WINSHELL = cmd
 
+
 # Define Messages
 # English
 MSG_ERRORS_NONE = Errors: none
@@ -454,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
 # Default target.
-all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end
+all: begin gccversion sizebefore build sizeafter end
 
 # Change the build target to build a HEX file or a library.
 build: elf hex eep lss sym
@@ -489,6 +500,7 @@ ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 
+
 sizebefore:
 	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 	2>/dev/null; echo; fi
@@ -497,32 +509,6 @@ sizeafter:
 	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 	2>/dev/null; echo; fi
 
-$(LUFA_PATH)/LUFA/LUFA_Events.lst:
-	@$(MAKE) -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst
-
-checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
-	@echo
-	@echo Checking for invalid events...
-	@$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
-	                 grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
-	@sed -n -e 's/^/  WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
-	@if test -s InvalidEvents.tmp; then exit 1; fi
-
-showliboptions:
-	@echo
-	@echo ---- Compile Time Library Options ----
-	@for i in $(LUFA_OPTS:-D%=%); do \
-		echo $$i; \
-	done
-	@echo --------------------------------------
-
-showtarget:
-	@echo
-	@echo --------- Target Information ---------
-	@echo AVR Model: $(MCU)
-	@echo Board:     $(BOARD)
-	@echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
-	@echo --------------------------------------
 
 
 # Display compiler version information.
@@ -541,7 +527,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
 	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+	dfu-programmer $(MCU) flash $(TARGET).hex
 	dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -552,7 +538,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
 	$(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
 	dfu-programmer $(MCU) reset
 
 
@@ -613,7 +599,7 @@ extcoff: $(TARGET).elf
 %.hex: %.elf
 	@echo
 	@echo $(MSG_FLASH) $@
-	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
+	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
 
 %.eep: %.elf
 	@echo
@@ -625,7 +611,7 @@ extcoff: $(TARGET).elf
 %.lss: %.elf
 	@echo
 	@echo $(MSG_EXTENDED_LISTING) $@
-	$(OBJDUMP) -h -z -S $< > $@
+	$(OBJDUMP) -h -S -z $< > $@
 
 # Create a symbol table from ELF output file.
 %.sym: %.elf
@@ -690,36 +676,42 @@ $(OBJDIR)/%.o : %.S
 
 
 # Target: clean project.
-clean: begin clean_list clean_binary end
+clean: begin clean_list end
 
-clean_binary:
-	$(REMOVE) $(TARGET).hex
-
-clean_list:
+clean_list :
+	@echo
 	@echo $(MSG_CLEANING)
+	$(REMOVE) $(TARGET).hex
 	$(REMOVE) $(TARGET).eep
-	$(REMOVE) $(TARGET)eep.hex
 	$(REMOVE) $(TARGET).cof
 	$(REMOVE) $(TARGET).elf
 	$(REMOVE) $(TARGET).map
 	$(REMOVE) $(TARGET).sym
 	$(REMOVE) $(TARGET).lss
-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 	$(REMOVE) $(SRC:.c=.s)
 	$(REMOVE) $(SRC:.c=.d)
 	$(REMOVE) $(SRC:.c=.i)
-	$(REMOVE) InvalidEvents.tmp
 	$(REMOVEDIR) .dep
 
 doxygen:
-	@echo Generating Project Documentation...
+	@echo Generating Project Documentation \($(TARGET)\)...
 	@doxygen Doxygen.conf
 	@echo Documentation Generation Complete.
 
 clean_doxygen:
 	rm -rf Documentation
 
+checksource:
+	@for f in $(SRC) $(CPPSRC) $(ASRC); do \
+		if [ -f $$f ]; then \
+			echo "Found Source File: $$f" ; \
+		else \
+			echo "Source File Not Found: $$f" ; \
+		fi; done 
+
+
 # Create object files directory
 $(shell mkdir $(OBJDIR) 2>/dev/null)
 
@@ -729,8 +721,7 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 
 
 # Listing of phony targets.
-.PHONY : all checkinvalidevents showliboptions    \
-showtarget begin finish end sizebefore sizeafter  \
-gccversion build elf hex eep lss sym coff extcoff \
-program dfu flip flip-ee dfu-ee clean debug       \
-clean_list clean_binary gdb-config doxygen
\ No newline at end of file
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff doxygen clean          \
+clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
+debug gdb-config checksource