X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/071e02c6b6b4837fa9cf0b6d4c749994e02638d7..6b0c46af6e4e67285fada7a3212197e92a33eb26:/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt

diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
index 568874157..d8b3b31db 100644
--- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
+++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
@@ -3,19 +3,22 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /** \mainpage Combined Mass Storage and Keyboard Device Demo
  *
- *  \section SSec_Compat Demo Compatibility:
+ *  \section Sec_Compat Demo Compatibility:
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
- *  - Series 7 USB AVRs
- *  - Series 6 USB AVRs
- *  - Series 4 USB AVRs
- *  - Series 2 USB AVRs
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
  *
- *  \section SSec_Info USB Information:
+ *  \section Sec_Info USB Information:
  *
  *  The following table gives a rundown of the USB utilization of this demo.
  *
@@ -29,7 +32,7 @@
  *    <td>Mass Storage Device \n
  *        Human Interface Device</td>
  *   </tr>
- *   <tr> 
+ *   <tr>
  *    <td><b>USB Subclasses:</b></td>
  *    <td>Bulk-Only Transport \n
  *        Keyboard Subclass</td>
@@ -44,49 +47,54 @@
  *        USBIF HID Usage Tables</td>
  *   </tr>
  *   <tr>
- *    <td><b>Usable Speeds:</b></td>
+ *    <td><b>Supported USB Speeds:</b></td>
  *    <td>Full Speed Mode</td>
  *   </tr>
  *  </table>
  *
- *  \section SSec_Description Project Description: 
+ *  \section Sec_Description Project Description:
  *
  *  Combined Mass Storage and Keyboard demonstration application. This gives a
  *  simple reference application for implementing a dual class USB Mass Storage
  *  and USB HID Keyboard device using the basic USB UFI and HID drivers in all
  *  modern OSes (i.e. no special drivers required).
- *  
+ *
  *  On start-up the system will automatically enumerate and function as an
  *  external mass storage device (which may be formatted and used in the same
  *  manner as commercial USB Mass Storage devices) and a USB keyboard.
- *  	
+ *
  *  You will need to format the mass storage drive upon first run of this
  *  demonstration - as the device acts only as a data block transport between
  *  the host and the storage media, it does not matter what file system is used,
  *  as the data interpretation is performed by the host and not the USB device.
  *
  *  Keys on the USB keyboard can be pressed by moving the board's Joystick.
- *  
+ *
  *  The USB control endpoint is managed entirely by the library using endpoint
  *  interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for
  *  the host to reset the Mass Storage device state during long transfers without
  *  the need for complicated polling logic.
  *
- *  \section SSec_Options Project Options
+ *  \section Sec_Options Project Options
  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *
  *  <table>
  *   <tr>
- *    <td><b>Define Name:</b></td>
- *    <td><b>Location:</b></td>
- *    <td><b>Description:</b></td>
+ *    <th><b>Define Name:</b></th>
+ *    <th><b>Location:</b></th>
+ *    <th><b>Description:</b></th>
  *   </tr>
  *   <tr>
  *    <td>TOTAL_LUNS</td>
- *    <td>MassStorage.h</td>
- *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive
- *        - this can be set to any positive non-zero amount.</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
+ *        this can be set to any positive non-zero amount.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>DISK_READ_ONLY</td>
+ *    <td>AppConfig.h</td>
+ *    <td>Configuration define, indicating if the disk should be write protected or not.</td>
  *   </tr>
- *  </table>
  */
+