X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/0486f12e3eab71e75273b774bb13eeb5937c544d..a9e0935a90346beb0c981924becc1f55d969a08b:/Bootloaders/TeensyHID/makefile

diff --git a/Bootloaders/TeensyHID/makefile b/Bootloaders/TeensyHID/makefile
index 15d1d9dff..404b55f9c 100644
--- a/Bootloaders/TeensyHID/makefile
+++ b/Bootloaders/TeensyHID/makefile
@@ -32,18 +32,6 @@
 # make program = Download the hex file to the device, using avrdude.
 #                Please customize the avrdude settings below first!
 #
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
 # make doxygen = Generate DoxyGen documentation for the project (must have
 #                DoxyGen installed)
 #
@@ -60,10 +48,10 @@
 
 
 # MCU name
-MCU = at90usb162
+MCU = atmega32u4
 
 
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
 BOARD  = 
@@ -98,7 +86,7 @@ F_CLOCK = $(F_CPU)
 
 
 # Starting byte address of the bootloader
-BOOT_START = 0xC000
+BOOT_START = 0x7000
 
 
 # Output format. (can be srec, ihex, binary)
@@ -121,14 +109,14 @@ LUFA_PATH = ../..
 
 # LUFA library compile-time options
 LUFA_OPTS  = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D USE_NONSTANDARD_DESCRIPTOR_NAMES
-LUFA_OPTS += -D CONTROL_ONLY_DEVICE
 LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 LUFA_OPTS += -D USE_RAM_DESCRIPTORS
 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 LUFA_OPTS += -D NO_INTERNAL_SERIAL
+LUFA_OPTS += -D NO_DEVICE_SELF_POWER
+LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
 
 
 # List C source files here. (C dependencies are automatically generated.)
@@ -140,10 +128,10 @@ SRC = $(TARGET).c                                                 \
 	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c       \
 	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \
  	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \
+	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/USBInterrupt.c       \
+	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
 	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c      \
 	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
 
 
 # List C++ source files here. (C dependencies are automatically generated.)
@@ -513,7 +501,7 @@ $(LUFA_PATH)/LUFA/LUFA_Events.lst:
 checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
 	@echo
 	@echo Checking for invalid events...
-	@$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
+	@$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
 	                 grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
 	@sed -n -e 's/^/  WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
 	@if test -s InvalidEvents.tmp; then exit 1; fi
@@ -544,27 +532,6 @@ gccversion :
 program: $(TARGET).hex $(TARGET).eep
 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
-flip: $(TARGET).hex
-	batchisp -hardware usb -device $(MCU) -operation erase f
-	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
-	batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
-	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
-	dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
-	$(COPY) $(TARGET).eep $(TARGET)eep.hex
-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
-	batchisp -hardware usb -device $(MCU) -operation start reset 0
-	$(REMOVE) $(TARGET)eep.hex
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
-	dfu-programmer $(MCU) reset
-
 
 # Generate avr-gdb config/init file which does the following:
 #     define the reset signal, load the target file, connect to target, and set 
@@ -742,5 +709,5 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 .PHONY : all checkinvalidevents showliboptions    \
 showtarget begin finish end sizebefore sizeafter  \
 gccversion build elf hex eep lss sym coff extcoff \
-program dfu flip flip-ee dfu-ee clean debug       \
-clean_list clean_binary gdb-config doxygen
\ No newline at end of file
+program clean debug clean_list clean_binary       \
+gdb-config doxygen
\ No newline at end of file