X-Git-Url: http://git.linex4red.de/pub/USBasp.git/blobdiff_plain/002cd6df49981ad75b2092f2ae6b3efc4e2dd364..56aed4b3e6f4172d34dd20dca3f5479d4c912104:/Projects/AVRISP-MKII/makefile

diff --git a/Projects/AVRISP-MKII/makefile b/Projects/AVRISP-MKII/makefile
index 5135722fd..dbc38cae9 100644
--- a/Projects/AVRISP-MKII/makefile
+++ b/Projects/AVRISP-MKII/makefile
@@ -60,13 +60,17 @@
 
 
 # MCU name
-MCU = at90usb1287
+MCU = at90usb162
+
+
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
 
 
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
 # "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBTINYMKII
 
 
 # Processor frequency.
@@ -75,16 +79,16 @@ BOARD = USBKEY
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
-#     This will be an integer division of F_CLOCK below, as it is sourced by
-#     F_CLOCK after it has run through any CPU prescalers. Note that this value
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
-F_CPU = 8000000
+F_CPU = 16000000
 
 
 # Input clock frequency.
-#     This will define a symbol, F_CLOCK, in all source code files equal to the
+#     This will define a symbol, F_USB, in all source code files equal to the
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -94,7 +98,7 @@ F_CPU = 8000000
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_CLOCK = $(F_CPU)
+F_USB = $(F_CPU)
 
 
 # Output format. (can be srec, ihex, binary)
@@ -117,12 +121,13 @@ LUFA_PATH = ../..
 
 # LUFA library compile-time options and predefined tokens
 LUFA_OPTS  = -D USB_DEVICE_ONLY
+LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
+LUFA_OPTS += -D ORDERED_EP_CONFIG
 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=16
 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 LUFA_OPTS += -D NO_INTERNAL_SERIAL
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
 LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
 LUFA_OPTS += -D NO_DEVICE_SELF_POWER
 
@@ -135,9 +140,12 @@ LUFA_OPTS += -D ENABLE_XPROG_PROTOCOL
 LUFA_OPTS += -D VTARGET_ADC_CHANNEL=2
 LUFA_OPTS += -D VTARGET_REF_VOLTS=5
 LUFA_OPTS += -D VTARGET_SCALE_FACTOR=1
+#LUFA_OPTS += -D VTARGET_USE_INTERNAL_REF
 #LUFA_OPTS += -D NO_VTARGET_DETECT
 #LUFA_OPTS += -D LIBUSB_DRIVER_COMPAT
 #LUFA_OPTS += -D XCK_RESCUE_CLOCK_ENABLE
+#LUFA_OPTS += -D INVERTED_ISP_MISO
+#LUFA_OPTS += -D FIRMWARE_VERSION_MINOR=0x11
 
 
 # Create the LUFA source path variables by including the LUFA root makefile
@@ -202,20 +210,20 @@ CSTANDARD = -std=c99
 
 # Place -D or -U options here for C sources
 CDEFS  = -DF_CPU=$(F_CPU)UL
-CDEFS += -DF_CLOCK=$(F_CLOCK)UL
-CDEFS += -DBOARD=BOARD_$(BOARD)
+CDEFS += -DF_USB=$(F_USB)UL
+CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
 CDEFS += $(LUFA_OPTS)
 
 
 # Place -D or -U options here for ASM sources
 ADEFS  = -DF_CPU=$(F_CPU)
-ADEFS += -DF_CLOCK=$(F_CLOCK)UL
+ADEFS += -DF_USB=$(F_USB)UL
 ADEFS += -DBOARD=BOARD_$(BOARD)
 ADEFS += $(LUFA_OPTS)
 
 # Place -D or -U options here for C++ sources
 CPPDEFS  = -DF_CPU=$(F_CPU)UL
-CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
+CPPDEFS += -DF_USB=$(F_USB)UL
 CPPDEFS += -DBOARD=BOARD_$(BOARD)
 CPPDEFS += $(LUFA_OPTS)
 #CPPDEFS += -D__STDC_LIMIT_MACROS
@@ -240,6 +248,7 @@ CFLAGS += -fno-inline-small-functions
 CFLAGS += -fpack-struct
 CFLAGS += -fshort-enums
 CFLAGS += -fno-strict-aliasing
+CFLAGS += -fno-split-wide-types
 CFLAGS += -Wall
 CFLAGS += -Wstrict-prototypes
 #CFLAGS += -mshort-calls
@@ -714,13 +723,24 @@ clean_list :
 	$(REMOVEDIR) .dep
 
 doxygen:
-	@echo Generating Project Documentation...
-	@doxygen Doxygen.conf
+	@echo Generating Project Documentation \($(TARGET)\)...
+	@if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+	  exit 1; \
+	fi;
 	@echo Documentation Generation Complete.
 
 clean_doxygen:
 	rm -rf Documentation
 
+checksource:
+	@for f in $(SRC) $(CPPSRC) $(ASRC); do \
+		if [ -f $$f ]; then \
+			echo "Found Source File: $$f" ; \
+		else \
+			echo "Source File Not Found: $$f" ; \
+		fi; done 
+
+
 # Create object files directory
 $(shell mkdir $(OBJDIR) 2>/dev/null)
 
@@ -733,5 +753,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 .PHONY : all begin finish end sizebefore sizeafter gccversion \
 build elf hex eep lss sym coff extcoff doxygen clean          \
 clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
-debug gdb-config
-
+debug gdb-config checksource