Changed default value for the reset polarity parameter in the AVRISP-MKII project...

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / XPROG / XPROGProtocol.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
index ab4d426..0f5269d 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
@@ -38,19 +38,19 @@
 
 #if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
 /** Base absolute address for the target's NVM controller for PDI programming */
-uint32_t XPROG_Param_NVMBase = 0x010001C0;
+uint32_t XPROG_Param_NVMBase       = 0x010001C0;
 
 /** Size in bytes of the target's EEPROM page */
-uint16_t XPROG_Param_EEPageSize;
+uint16_t XPROG_Param_EEPageSize    = 32;
 
 /** Address of the TPI device's NVMCMD register for TPI programming */
-uint8_t  XPROG_Param_NVMCMDRegAddr;
+uint8_t  XPROG_Param_NVMCMDRegAddr = 0x33;
 
 /** Address of the TPI device's NVMCSR register for TPI programming */
-uint8_t  XPROG_Param_NVMCSRRegAddr;
+uint8_t  XPROG_Param_NVMCSRRegAddr = 0x32;
 
 /** Currently selected XPROG programming protocol */
-uint8_t  XPROG_SelectedProtocol = XPRG_PROTOCOL_PDI;
+uint8_t  XPROG_SelectedProtocol    = XPRG_PROTOCOL_PDI;
 
 /** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI/TPI
  *  programming.
@@ -115,7 +115,7 @@ static void XPROGProtocol_EnterXPROGMode(void)
        Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
        Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
        
-       bool NVMBusEnabled;
+       bool NVMBusEnabled = false;
 
        if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
        {
@@ -131,14 +131,14 @@ static void XPROGProtocol_EnterXPROGMode(void)
                XPROGTarget_SendByte(0x07);
 
                /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
-               XPROGTarget_SendByte(PDI_CMD_KEY);      
+               XPROGTarget_SendByte(PDI_CMD_KEY);
                for (uint8_t i = sizeof(PDI_NVMENABLE_KEY); i > 0; i--)
                  XPROGTarget_SendByte(PDI_NVMENABLE_KEY[i - 1]);
 
                /* Wait until the NVM bus becomes active */
                NVMBusEnabled = XMEGANVM_WaitWhileNVMBusBusy();
        }
-       else
+       else if (XPROG_SelectedProtocol == XPRG_PROTOCOL_TPI)
        {
                /* Enable TPI programming mode with the attached target */
                XPROGTarget_EnableTargetTPI();
@@ -256,7 +256,7 @@ static void XPROGProtocol_Erase(void)
                                break;
                }
                
-               /* Erase the target memory, indicate timeout if ocurred */
+               /* Erase the target memory, indicate timeout if occurred */
                if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
                  ReturnStatus = XPRG_ERR_TIMEOUT;
        }
@@ -267,7 +267,7 @@ static void XPROGProtocol_Erase(void)
                else
                  EraseCommand = TINY_NVM_CMD_SECTIONERASE;
        
-               /* Erase the target memory, indicate timeout if ocurred */
+               /* Erase the target memory, indicate timeout if occurred */
                if (!(TINYNVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
                  ReturnStatus = XPRG_ERR_TIMEOUT;
        }