Fixed MIDI class driver send routines silently discarding packets if the endpoint...

[pub/USBasp.git] / Projects / XPLAINBridge / Lib / SoftUART.c

diff --git a/Projects/XPLAINBridge/Lib/SoftUART.c b/Projects/XPLAINBridge/Lib/SoftUART.c
index b96b45f..4b38a0b 100644 (file)
--- a/Projects/XPLAINBridge/Lib/SoftUART.c
+++ b/Projects/XPLAINBridge/Lib/SoftUART.c
@@ -1,9 +1,9 @@
 /*
-                        LUFA Library
-        Copyright (C) Dean Camera, 2010.
-                         
+             LUFA Library
+     Copyright (C) Dean Camera, 2010.
+
   dean [at] fourwalledcubicle [dot] com
-         www.fourwalledcubicle.com
+           www.lufa-lib.org
 */
 
 /*
@@ -11,13 +11,13 @@
   Copyright 2010  Peter Danneger
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -67,11 +67,11 @@ void SoftUART_Init(void)
        SoftUART_SetBaud(9600);
 
        /* Setup reception timer compare ISR */
-       TIMSK1 = (1 << OCIE1A);
+       TIMSK1 = (1 << ICIE1);
 
        /* Setup transmission timer compare ISR and start the timer */
-       TIMSK3 = (1 << OCIE3A);
-       TCCR3B = ((1 << CS30) | (1 << WGM32));
+       TIMSK3 = (1 << ICIE3);
+       TCCR3B = ((1 << CS30) | (1 << WGM33) | (1 << WGM32));
 }
 
 /** ISR to detect the start of a bit being sent to the software UART. */
@@ -79,7 +79,7 @@ ISR(INT0_vect, ISR_BLOCK)
 {
        /* Reset the number of reception bits remaining counter */
        RX_BitsRemaining = 8;
-       
+
        /* Reset the bit reception timer */
        TCNT1 = 0;
 
@@ -90,12 +90,12 @@ ISR(INT0_vect, ISR_BLOCK)
                EIMSK = 0;
 
                /* Start the reception timer */
-               TCCR1B = ((1 << CS10) | (1 << WGM12));
+               TCCR1B = ((1 << CS10) | (1 << WGM13) | (1 << WGM12));
        }
 }
 
 /** ISR to manage the reception of bits to the software UART. */
-ISR(TIMER1_COMPA_vect, ISR_BLOCK)
+ISR(TIMER1_CAPT_vect, ISR_BLOCK)
 {
        /* Cache the current RX pin value for later checking */
        uint8_t SRX_Cached = (SRXPIN & (1 << SRX));
@@ -120,12 +120,12 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
 
                /* Reception complete, store the received byte if stop bit valid */
                if (SRX_Cached)
-                 RingBuffer_Insert(&UARTtoUSB_Buffer, RX_Data);        
+                 RingBuffer_Insert(&UARTtoUSB_Buffer, RX_Data);
        }
 }
 
 /** ISR to manage the transmission of bits via the software UART. */
-ISR(TIMER3_COMPA_vect, ISR_BLOCK)
+ISR(TIMER3_CAPT_vect, ISR_BLOCK)
 {
        /* Check if transmission has finished */
        if (TX_BitsRemaining)
@@ -150,3 +150,4 @@ ISR(TIMER3_COMPA_vect, ISR_BLOCK)
                TX_BitsRemaining = 9;
        }
 }
+