Add other missing Printer.h main class driver dispatch file.

[pub/USBasp.git] / Demos / Device / ClassDriver / MIDI / makefile

diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile
index a9e1497..7965e91 100644 (file)
--- a/Demos/Device/ClassDriver/MIDI/makefile
+++ b/Demos/Device/ClassDriver/MIDI/makefile
@@ -71,28 +71,21 @@ BOARD  = USBKEY
 \r
 # Processor frequency.\r
 #     This will define a symbol, F_CPU, in all source code files equal to the \r
 \r
 # Processor frequency.\r
 #     This will define a symbol, F_CPU, in all source code files equal to the \r

-#     processor frequency. You can then use this symbol in your source code to \r
+#     processor frequency in Hz. You can then use this symbol in your source code to \r

 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
 #     automatically to create a 32-bit value in your source code.\r
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done\r
 #     automatically to create a 32-bit value in your source code.\r

-#     Typical values are:\r
-#         F_CPU =  1000000\r
-#         F_CPU =  1843200\r
-#         F_CPU =  2000000\r
-#         F_CPU =  3686400\r
-#         F_CPU =  4000000\r
-#         F_CPU =  7372800\r
-#         F_CPU =  8000000\r
-#         F_CPU = 11059200\r
-#         F_CPU = 14745600\r
-#         F_CPU = 16000000\r
-#         F_CPU = 18432000\r
-#         F_CPU = 20000000\r
+#\r
+#     This will be an integer division of F_CLOCK below, as it is sourced by\r
+#     F_CLOCK after it has run through any CPU prescalers. Note that this value\r
+#     does not *change* the processor frequency - it should merely be updated to\r
+#     reflect the processor speed set externally so that the code can use accurate\r
+#     software delays.\r

 F_CPU = 8000000\r
 \r
 \r
 # Input clock frequency.\r
 #     This will define a symbol, F_CLOCK, in all source code files equal to the \r
 F_CPU = 8000000\r
 \r
 \r
 # Input clock frequency.\r
 #     This will define a symbol, F_CLOCK, in all source code files equal to the \r

-#     input clock frequency (before any prescaling is performed). This value may\r
+#     input clock frequency (before any prescaling is performed) in Hz. This value may\r

 #     differ from F_CPU if prescaling is used on the latter, and is required as the\r
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed\r
 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r
 #     differ from F_CPU if prescaling is used on the latter, and is required as the\r
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed\r
 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'\r


@@ -101,7 +94,7 @@ F_CPU = 8000000
 #\r
 #     If no clock division is performed on the input clock inside the AVR (via the\r
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.\r
 #\r
 #     If no clock division is performed on the input clock inside the AVR (via the\r
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.\r

-F_CLOCK = 8000000\r
+F_CLOCK = $(F_CPU)\r

 \r
 \r
 # Output format. (can be srec, ihex, binary)\r
 \r
 \r
 # Output format. (can be srec, ihex, binary)\r


@@ -123,10 +116,10 @@ LUFA_PATH = ../../../..
 \r
 \r
 # LUFA library compile-time options\r
 \r
 \r
 # LUFA library compile-time options\r

-LUFA_OPTS  = -D USE_NONSTANDARD_DESCRIPTOR_NAMES\r
-LUFA_OPTS += -D USB_DEVICE_ONLY\r
+LUFA_OPTS  = -D USB_DEVICE_ONLY\r

 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8\r
 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8\r

-LUFA_OPTS += -D USE_SINGLE_DEVICE_CONFIGURATION\r
+LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1\r
+LUFA_OPTS += -D USE_FLASH_DESCRIPTORS\r

 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"\r
 \r
 \r
 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"\r
 \r
 \r


@@ -144,7 +137,6 @@ SRC = $(TARGET).c                                                 \
          $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \\r
          $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \\r
          $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/MIDI.c           \\r
          $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \\r
          $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \\r
          $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/MIDI.c           \\r

-         $(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/MIDI.c             \\r

 \r
 \r
 # List C++ source files here. (C dependencies are automatically generated.)\r
 \r
 \r
 # List C++ source files here. (C dependencies are automatically generated.)\r


@@ -217,9 +209,9 @@ CFLAGS += -O$(OPT)
 CFLAGS += -funsigned-char\r
 CFLAGS += -funsigned-bitfields\r
 CFLAGS += -ffunction-sections\r
 CFLAGS += -funsigned-char\r
 CFLAGS += -funsigned-bitfields\r
 CFLAGS += -ffunction-sections\r

+CFLAGS += -fno-inline-small-functions\r

 CFLAGS += -fpack-struct\r
 CFLAGS += -fshort-enums\r
 CFLAGS += -fpack-struct\r
 CFLAGS += -fshort-enums\r

-CFLAGS += -finline-limit=20\r

 CFLAGS += -Wall\r
 CFLAGS += -Wstrict-prototypes\r
 CFLAGS += -Wundef\r
 CFLAGS += -Wall\r
 CFLAGS += -Wstrict-prototypes\r
 CFLAGS += -Wundef\r


@@ -463,7 +455,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 \r
 \r
 # Default target.\r
 \r
 \r
 # Default target.\r

-all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end\r
+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end\r

 \r
 # Change the build target to build a HEX file or a library.\r
 build: elf hex eep lss sym\r
 \r
 # Change the build target to build a HEX file or a library.\r
 build: elf hex eep lss sym\r


@@ -506,34 +498,39 @@ sizeafter:
        @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
        2>/dev/null; echo; fi\r
 \r
        @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \\r
        2>/dev/null; echo; fi\r
 \r

-checkhooks: build\r
+$(LUFA_PATH)/LUFA/LUFA_Events.lst:\r
+       @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst\r
+\r
+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst\r

        @echo\r
        @echo\r

-       @echo ------- Unhooked LUFA Events -------\r
-       @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
-                  cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
-                          echo "(None)"\r
-       @echo ------------------------------------\r
+       @echo Checking for invalid events...\r
+       @$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \\r
+                        grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true\r
+       @sed -n -e 's/^/  WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp\r
+       @if test -s InvalidEvents.tmp; then exit 1; fi\r

 \r
 \r

-checklibmode:\r
+showliboptions:\r

        @echo\r
        @echo\r

-       @echo ----------- Library Mode -----------\r
-       @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \\r
-                 | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \\r
-                 || echo "No specific mode (both device and host mode allowable)."\r
-       @echo ------------------------------------\r
+       @echo ---- Compile Time Library Options ----\r
+       @for i in $(LUFA_OPTS:-D%=%); do \\r
+               echo $$i; \\r
+       done\r
+       @echo --------------------------------------\r

 \r
 \r

-checkboard:\r
+showtarget:\r

        @echo\r
        @echo\r

-       @echo ---------- Selected Board ----------\r
-       @echo Selected board model is $(BOARD).\r
-       @echo ------------------------------------\r
+       @echo --------- Target Information ---------\r
+       @echo AVR Model: $(MCU)\r
+       @echo Board:     $(BOARD)\r
+       @echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master\r
+       @echo --------------------------------------\r

        \r
        \r

+\r

 # Display compiler version information.\r
 gccversion : \r
        @$(CC) --version\r
 \r
 \r
 # Display compiler version information.\r
 gccversion : \r
        @$(CC) --version\r
 \r
 \r

-\r

 # Program the device.  \r
 program: $(TARGET).hex $(TARGET).eep\r
        $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
 # Program the device.  \r
 program: $(TARGET).hex $(TARGET).eep\r
        $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r


@@ -549,10 +546,11 @@ dfu: $(TARGET).hex
        dfu-programmer $(MCU) reset\r
 \r
 flip-ee: $(TARGET).hex $(TARGET).eep\r
        dfu-programmer $(MCU) reset\r
 \r
 flip-ee: $(TARGET).hex $(TARGET).eep\r

-       copy $(TARGET).eep $(TARGET)eep.hex\r
+       $(COPY) $(TARGET).eep $(TARGET)eep.hex\r

        batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
        batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
        batchisp -hardware usb -device $(MCU) -operation start reset 0\r
        batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
        batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
        batchisp -hardware usb -device $(MCU) -operation start reset 0\r

+       $(REMOVE) $(TARGET)eep.hex\r

 \r
 dfu-ee: $(TARGET).hex $(TARGET).eep\r
        dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r
 \r
 dfu-ee: $(TARGET).hex $(TARGET).eep\r
        dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep\r


@@ -712,9 +710,9 @@ clean_list:
        $(REMOVE) $(SRC:.c=.s)\r
        $(REMOVE) $(SRC:.c=.d)\r
        $(REMOVE) $(SRC:.c=.i)\r
        $(REMOVE) $(SRC:.c=.s)\r
        $(REMOVE) $(SRC:.c=.d)\r
        $(REMOVE) $(SRC:.c=.i)\r

+       $(REMOVE) InvalidEvents.tmp\r

        $(REMOVEDIR) .dep\r
 \r
        $(REMOVEDIR) .dep\r
 \r

-\r

 doxygen:\r
        @echo Generating Project Documentation...\r
        @doxygen Doxygen.conf\r
 doxygen:\r
        @echo Generating Project Documentation...\r
        @doxygen Doxygen.conf\r


@@ -732,8 +730,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 \r
 \r
 # Listing of phony targets.\r
 \r
 \r
 # Listing of phony targets.\r

-.PHONY : all checkhooks checklibmode checkboard   \\r
-begin finish end sizebefore sizeafter gccversion  \\r
-build elf hex eep lss sym coff extcoff clean      \\r
-clean_list clean_binary program debug gdb-config  \\r
-doxygen dfu flip flip-ee dfu-ee
\ No newline at end of file
+.PHONY : all checkinvalidevents showliboptions    \\r
+showtarget begin finish end sizebefore sizeafter  \\r
+gccversion build elf hex eep lss sym coff extcoff \\r
+program dfu flip flip-ee dfu-ee clean debug       \\r
+clean_list clean_binary gdb-config doxygen
\ No newline at end of file