-/** \file\r
- *\r
- * This file contains special DoxyGen information for the generation of the main page and other special\r
- * documentation pages. It is not a project source file.\r
- */\r
-\r
-/** \mainpage Communications Device Class (Virtual Serial Port) and Mass Storage Demo\r
- *\r
- * \section Sec_Compat Demo Compatibility:\r
- *\r
- * The following list indicates what microcontrollers are compatible with this demo.\r
- *\r
- * - Series 7 USB AVRs (AT90USBxxx7)\r
- * - Series 6 USB AVRs (AT90USBxxx6)\r
- * - Series 4 USB AVRs (ATMEGAxxU4)\r
- * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)\r
- *\r
- * \section Sec_Info USB Information:\r
- *\r
- * The following table gives a rundown of the USB utilization of this demo.\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><b>USB Mode:</b></td>\r
- * <td>Device</td>\r
- * </tr>\r
- * <tr>\r
- * <td><b>USB Class:</b></td>\r
- * <td>Communications Device Class (CDC) \n\r
- * Mass Storage Device</td>\r
- * </tr>\r
- * <tr>\r
- * <td><b>USB Subclass:</b></td>\r
- * <td>Abstract Control Model (ACM) \n\r
- * Bulk-Only Transport</td>\r
- * </tr>\r
- * <tr>\r
- * <td><b>Relevant Standards:</b></td>\r
- * <td>USBIF CDC Class Standard \n\r
- * USBIF Mass Storage Standard \n\r
- * USB Bulk-Only Transport Standard \n\r
- * SCSI Primary Commands Specification \n\r
- * SCSI Block Commands Specification</td>\r
- * </tr>\r
- * <tr>\r
- * <td><b>Usable Speeds:</b></td>\r
- * <td>Full Speed Mode</td>\r
- * </tr>\r
- * </table>\r
- *\r
- * \section Sec_Description Project Description:\r
- *\r
- * Combined Communications Device Class/Mass Storage demonstration application.\r
- * This gives a simple reference application for implementing a combined\r
- * CDC and Mass Storage device acting as a both a virtual serial port and a flash\r
- * drive. Joystick actions are transmitted to the host as strings, and data can be\r
- * written to or read from the exposed flash drive interface in the same manner as\r
- * other USB flash drives. The device does not respond to serial data sent from the\r
- * host.\r
- *\r
- * After running this demo for the first time on a new computer,\r
- * you will need to supply the .INF file located in this demo\r
- * project's directory as the device's driver when running under\r
- * Windows. This will enable Windows to use its inbuilt CDC drivers,\r
- * negating the need for custom drivers for the device. Other\r
- * Operating Systems should automatically use their own inbuilt\r
- * CDC-ACM drivers.\r
- *\r
- * \section Sec_Options Project Options\r
- *\r
- * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.\r
- *\r
- * <table>\r
- * <tr>\r
- * <td><b>Define Name:</b></td>\r
- * <td><b>Location:</b></td>\r
- * <td><b>Description:</b></td>\r
- * </tr>\r
- * <tr>\r
- * <td>TOTAL_LUNS</td>\r
- * <td>MassStorage.h</td>\r
- * <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -\r
- * this can be set to any positive non-zero amount.</td>\r
- * </tr>\r
- * </table>\r
- */\r
-\r
+/** \file
+ *
+ * This file contains special DoxyGen information for the generation of the main page and other special
+ * documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Communications Device Class (Virtual Serial Port) and Mass Storage Demo
+ *
+ * \section Sec_Compat Demo Compatibility:
+ *
+ * The following list indicates what microcontrollers are compatible with this demo.
+ *
+ * - Series 7 USB AVRs (AT90USBxxx7)
+ * - Series 6 USB AVRs (AT90USBxxx6)
+ * - Series 4 USB AVRs (ATMEGAxxU4)
+ *
+ * \section Sec_Info USB Information:
+ *
+ * The following table gives a rundown of the USB utilization of this demo.
+ *
+ * <table>
+ * <tr>
+ * <td><b>USB Mode:</b></td>
+ * <td>Device</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Class:</b></td>
+ * <td>Communications Device Class (CDC) \n
+ * Mass Storage Device</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Subclass:</b></td>
+ * <td>Abstract Control Model (ACM) \n
+ * Bulk-Only Transport</td>
+ * </tr>
+ * <tr>
+ * <td><b>Relevant Standards:</b></td>
+ * <td>USBIF CDC Class Standard \n
+ * USBIF Mass Storage Standard \n
+ * USB Bulk-Only Transport Standard \n
+ * SCSI Primary Commands Specification \n
+ * SCSI Block Commands Specification</td>
+ * </tr>
+ * <tr>
+ * <td><b>Usable Speeds:</b></td>
+ * <td>Full Speed Mode</td>
+ * </tr>
+ * </table>
+ *
+ * \section Sec_Description Project Description:
+ *
+ * Combined Communications Device Class/Mass Storage demonstration application.
+ * This gives a simple reference application for implementing a combined
+ * CDC and Mass Storage device acting as a both a virtual serial port and a flash
+ * drive. Joystick actions are transmitted to the host as strings, and data can be
+ * written to or read from the exposed flash drive interface in the same manner as
+ * other USB flash drives. The device does not respond to serial data sent from the
+ * host.
+ *
+ * After running this demo for the first time on a new computer,
+ * you will need to supply the .INF file located in this demo
+ * project's directory as the device's driver when running under
+ * Windows. This will enable Windows to use its inbuilt CDC drivers,
+ * negating the need for custom drivers for the device. Other
+ * Operating Systems should automatically use their own inbuilt
+ * CDC-ACM drivers.
+ *
+ * \section Sec_Options Project Options
+ *
+ * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ * <table>
+ * <tr>
+ * <td><b>Define Name:</b></td>
+ * <td><b>Location:</b></td>
+ * <td><b>Description:</b></td>
+ * </tr>
+ * <tr>
+ * <td>TOTAL_LUNS</td>
+ * <td>MassStorage.h</td>
+ * <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
+ * this can be set to any positive non-zero amount.</td>
+ * </tr>
+ * </table>
+ */
+
projects / pub / USBasp.git / blobdiff