Update the incomplete StandaloneProgrammer project to be compatible with the latest...

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / XPROG / XPROGTarget.h

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
index 3cb73ce..ebc5639 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
@@ -1,21 +1,21 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2010.
-              
+     Copyright (C) Dean Camera, 2011.
+
   dean [at] fourwalledcubicle [dot] com
-      www.fourwalledcubicle.com
+           www.lufa-lib.org
 */
 
 /*
-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -40,27 +40,27 @@
                #include <avr/io.h>
                #include <avr/interrupt.h>
                #include <stdbool.h>
-               
+
                #include <LUFA/Common/Common.h>
-               
+
                #include "../V2Protocol.h"
                #include "XPROGProtocol.h"
-       
+
        /* Preprocessor Checks: */
                #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
                        #undef ENABLE_ISP_PROTOCOL
-                       
+
                        #if !defined(ENABLE_XPROG_PROTOCOL)
                                #define ENABLE_XPROG_PROTOCOL
                        #endif
                #endif
-               
-               /** Serial carrier TPI/PDI speed when hardware TPI/PDI mode is used. */
-               #define XPROG_HARDWARE_SPEED       1000000
+
+               /** Serial carrier TPI/PDI speed in Hz, when hardware TPI/PDI mode is used. */
+               #define XPROG_HARDWARE_SPEED       250000
 
                /** Total number of bits in a single USART frame. */
                #define BITS_IN_USART_FRAME        12
-               
+
                #define PDI_CMD_LDS                0x00
                #define PDI_CMD_LD                 0x20
                #define PDI_CMD_STS                0x40
@@ -69,11 +69,11 @@
                #define PDI_CMD_REPEAT             0xA0
                #define PDI_CMD_STCS               0xC0
                #define PDI_CMD_KEY                0xE0
-               
+
                #define PDI_STATUS_REG             0
                #define PDI_RESET_REG              1
                #define PDI_CTRL_REG               2
-               
+
                #define PDI_STATUS_NVM             (1 << 1)
 
                #define PDI_RESET_KEY              0x59
@@ -83,7 +83,7 @@
                #define PDI_DATSIZE_2BYTES         1
                #define PDI_DATSIZE_3BYTES         2
                #define PDI_DATSIZE_4BYTES         3
-               
+
                #define PDI_POINTER_INDIRECT       0
                #define PDI_POINTER_INDIRECT_PI    1
                #define PDI_POINTER_DIRECT         2
@@ -100,14 +100,14 @@
                #define TPI_STATUS_REG             0x00
                #define TPI_CTRL_REG               0x02
                #define TPI_ID_REG                 0x0F
-               
+
                #define TPI_STATUS_NVM             (1 << 1)
 
                #define TPI_NVMENABLE_KEY          (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF}
 
                #define TPI_POINTER_INDIRECT       0
                #define TPI_POINTER_INDIRECT_PI    4
-               
+
        /* Function Prototypes: */
                void    XPROGTarget_EnableTargetPDI(void);
                void    XPROGTarget_EnableTargetTPI(void);
@@ -115,12 +115,13 @@
                void    XPROGTarget_DisableTargetTPI(void);
                void    XPROGTarget_SendByte(const uint8_t Byte);
                uint8_t XPROGTarget_ReceiveByte(void);
-               void    XPROGTarget_SendBreak(void);
+               void    XPROGTarget_SendIdle(void);
                bool    XPROGTarget_WaitWhileNVMBusBusy(void);
-               
+
                #if (defined(INCLUDE_FROM_XPROGTARGET_C) && defined(ENABLE_XPROG_PROTOCOL))
                        static void XPROGTarget_SetTxMode(void);
                        static void XPROGTarget_SetRxMode(void);
                #endif
 
 #endif
+