Add support for the Atmel UC3-A3 Xplained board.

[pub/USBasp.git] / Demos / Device / ClassDriver / AudioOutput / AudioOutput.c

diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
index bf0e22a..1869ac9 100644 (file)
--- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
+++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
 /*
              LUFA Library

-     Copyright (C) Dean Camera, 2010.
+     Copyright (C) Dean Camera, 2012.

 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)

 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted


@@ -44,13 +44,21 @@ USB_ClassInfo_Audio_Device_t Speaker_Audio_Interface =
        {
                .Config =
                        {
        {
                .Config =
                        {

+                               .ControlInterfaceNumber   = 0,

                                .StreamingInterfaceNumber = 1,
                                .StreamingInterfaceNumber = 1,

-
-                               .DataOUTEndpointNumber    = AUDIO_STREAM_EPNUM,
-                               .DataOUTEndpointSize      = AUDIO_STREAM_EPSIZE,
+                               .DataOUTEndpoint          =
+                                       {
+                                               .Address          = AUDIO_STREAM_EPADDR,
+                                               .Size             = AUDIO_STREAM_EPSIZE,
+                                               .Banks            = 2,
+                                       },

                        },
        };
 
                        },
        };
 

+/** Current audio sampling frequency of the streaming audio endpoint. */
+static uint32_t CurrentAudioSampleFrequency = 48000;
+
+

 /** Main program entry point. This routine contains the overall program flow, including initial
  *  setup of all components and the main program loop.
  */
 /** Main program entry point. This routine contains the overall program flow, including initial
  *  setup of all components and the main program loop.
  */


@@ -88,6 +96,7 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
 {
        uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
 
 {
        uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
 

+       /* Check that the USB bus is ready for the next sample to read */

        if (Audio_Device_IsSampleReceived(&Speaker_Audio_Interface))
        {
                /* Retrieve the signed 16-bit left and right audio samples, convert to 8-bit */
        if (Audio_Device_IsSampleReceived(&Speaker_Audio_Interface))
        {
                /* Retrieve the signed 16-bit left and right audio samples, convert to 8-bit */


@@ -123,8 +132,8 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
 
                LEDs_SetAllLEDs(LEDMask);
        }
 
                LEDs_SetAllLEDs(LEDMask);
        }

-       
-       Endpoint_SelectEndpoint(PrevEndpoint);  
+
+       Endpoint_SelectEndpoint(PrevEndpoint);

 }
 
 /** Event handler for the library USB Connection event. */
 }
 
 /** Event handler for the library USB Connection event. */


@@ -134,7 +143,7 @@ void EVENT_USB_Device_Connect(void)
 
        /* Sample reload timer initialization */
        TIMSK0  = (1 << OCIE0A);
 
        /* Sample reload timer initialization */
        TIMSK0  = (1 << OCIE0A);

-       OCR0A   = (F_CPU / 8 / AUDIO_SAMPLE_FREQUENCY) - 1;
+       OCR0A   = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);

        TCCR0A  = (1 << WGM01);  // CTC mode
        TCCR0B  = (1 << CS01);   // Fcpu/8 speed
 
        TCCR0A  = (1 << WGM01);  // CTC mode
        TCCR0B  = (1 << CS01);   // Fcpu/8 speed
 


@@ -198,3 +207,103 @@ void EVENT_USB_Device_ControlRequest(void)
        Audio_Device_ProcessControlRequest(&Speaker_Audio_Interface);
 }
 
        Audio_Device_ProcessControlRequest(&Speaker_Audio_Interface);
 }
 

+/** Audio class driver callback for the setting and retrieval of streaming endpoint properties. This callback must be implemented
+ *  in the user application to handle property manipulations on streaming audio endpoints.
+ *
+ *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
+ *  the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
+ *  to indicate the size of the retrieved data.
+ *
+ *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
+ *        of the \c DataLength parameter.
+ *
+ *  \param[in,out] AudioInterfaceInfo  Pointer to a structure containing an Audio Class configuration and state.
+ *  \param[in]     EndpointProperty    Property of the endpoint to get or set, a value from Audio_ClassRequests_t.
+ *  \param[in]     EndpointAddress     Address of the streaming endpoint whose property is being referenced.
+ *  \param[in]     EndpointControl     Parameter of the endpoint to get or set, a value from Audio_EndpointControls_t.
+ *  \param[in,out] DataLength          For SET operations, the length of the parameter data to set. For GET operations, the maximum
+ *                                     length of the retrieved data. When NULL, the function should return whether the given property
+ *                                     and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
+ *  \param[in,out] Data                Pointer to a location where the parameter data is stored for SET operations, or where
+ *                                     the retrieved data is to be stored for GET operations.
+ *
+ *  \return Boolean true if the property get/set was successful, false otherwise
+ */
+bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
+                                                  const uint8_t EndpointProperty,
+                                                  const uint8_t EndpointAddress,
+                                                  const uint8_t EndpointControl,
+                                                  uint16_t* const DataLength,
+                                                  uint8_t* Data)
+{
+       /* Check the requested endpoint to see if a supported endpoint is being manipulated */
+       if (EndpointAddress == Speaker_Audio_Interface.Config.DataOUTEndpoint.Address)
+       {
+               /* Check the requested control to see if a supported control is being manipulated */
+               if (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)
+               {
+                       switch (EndpointProperty)
+                       {
+                               case AUDIO_REQ_SetCurrent:
+                                       /* Check if we are just testing for a valid property, or actually adjusting it */
+                                       if (DataLength != NULL)
+                                       {
+                                               /* Set the new sampling frequency to the value given by the host */
+                                               CurrentAudioSampleFrequency = (((uint32_t)Data[2] << 16) | ((uint32_t)Data[1] << 8) | (uint32_t)Data[0]);
+
+                                               /* Adjust sample reload timer to the new frequency */
+                                               OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
+                                       }
+
+                                       return true;
+                               case AUDIO_REQ_GetCurrent:
+                                       /* Check if we are just testing for a valid property, or actually reading it */
+                                       if (DataLength != NULL)
+                                       {
+                                               *DataLength = 3;
+
+                                               Data[2] = (CurrentAudioSampleFrequency >> 16);
+                                               Data[1] = (CurrentAudioSampleFrequency >> 8);
+                                               Data[0] = (CurrentAudioSampleFrequency &  0xFF);
+                                       }
+
+                                       return true;
+                       }
+               }
+       }
+
+       return false;
+}
+
+/** Audio class driver callback for the setting and retrieval of streaming interface properties. This callback must be implemented
+ *  in the user application to handle property manipulations on streaming audio interfaces.
+ *
+ *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
+ *  the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations
+ *  to indicate the size of the retrieved data.
+ *
+ *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
+ *        of the \c DataLength parameter.
+ *
+ *  \param[in,out] AudioInterfaceInfo  Pointer to a structure containing an Audio Class configuration and state.
+ *  \param[in]     Property            Property of the interface to get or set, a value from Audio_ClassRequests_t.
+ *  \param[in]     EntityAddress       Address of the audio entity whose property is being referenced.
+ *  \param[in]     Parameter           Parameter of the entity to get or set, specific to each type of entity (see USB Audio specification).
+ *  \param[in,out] DataLength          For SET operations, the length of the parameter data to set. For GET operations, the maximum
+ *                                     length of the retrieved data. When NULL, the function should return whether the given property
+ *                                     and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
+ *  \param[in,out] Data                Pointer to a location where the parameter data is stored for SET operations, or where
+ *                                     the retrieved data is to be stored for GET operations.
+ *
+ *  \return Boolean \c true if the property GET/SET was successful, \c false otherwise
+ */
+bool CALLBACK_Audio_Device_GetSetInterfaceProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
+                                                   const uint8_t Property,
+                                                   const uint8_t EntityAddress,
+                                                   const uint16_t Parameter,
+                                                   uint16_t* const DataLength,
+                                                   uint8_t* Data) 
+{
+       /* No audio interface entities in the device descriptor, thus no properties to get or set. */
+       return false;
+}