Get rid of the redundant ATTR_NEVER_INLINE macro which translated to the same as...

[pub/USBasp.git] / Projects / XPLAINBridge / XPLAINBridge.c

diff --git a/Projects/XPLAINBridge/XPLAINBridge.c b/Projects/XPLAINBridge/XPLAINBridge.c
index 6dc1859..1c63b71 100644 (file)
--- a/Projects/XPLAINBridge/XPLAINBridge.c
+++ b/Projects/XPLAINBridge/XPLAINBridge.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2011.
+     Copyright (C) Dean Camera, 2013.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -18,7 +18,7 @@
   advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
-  The author disclaim all warranties with regard to this
+  The author disclaims all warranties with regard to this
   software, including all implied warranties of merchantability
   and fitness.  In no event shall the author be liable for any
   special, indirect or consequential damages or any damages
@@ -47,19 +47,25 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
        {
                .Config =
                        {
-                               .ControlInterfaceNumber         = 0,
-
-                               .DataINEndpointNumber           = CDC_TX_EPNUM,
-                               .DataINEndpointSize             = CDC_TXRX_EPSIZE,
-                               .DataINEndpointDoubleBank       = true,
-
-                               .DataOUTEndpointNumber          = CDC_RX_EPNUM,
-                               .DataOUTEndpointSize            = CDC_TXRX_EPSIZE,
-                               .DataOUTEndpointDoubleBank      = true,
-
-                               .NotificationEndpointNumber     = CDC_NOTIFICATION_EPNUM,
-                               .NotificationEndpointSize       = CDC_NOTIFICATION_EPSIZE,
-                               .NotificationEndpointDoubleBank = false,
+                               .ControlInterfaceNumber         = INTERFACE_ID_CDC_CCI,
+                               .DataINEndpoint                 =
+                                       {
+                                               .Address                = CDC_TX_EPADDR,
+                                               .Size                   = CDC_TXRX_EPSIZE,
+                                               .Banks                  = 1,
+                                       },
+                               .DataOUTEndpoint                =
+                                       {
+                                               .Address                = CDC_RX_EPADDR,
+                                               .Size                   = CDC_TXRX_EPSIZE,
+                                               .Banks                  = 1,
+                                       },
+                               .NotificationEndpoint           =
+                                       {
+                                               .Address                = CDC_NOTIFICATION_EPADDR,
+                                               .Size                   = CDC_NOTIFICATION_EPSIZE,
+                                               .Banks                  = 1,
+                                       },
                        },
        };
 
@@ -84,7 +90,7 @@ int main(void)
        SetupHardware();
 
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-       sei();
+       GlobalInterruptEnable();
 
        for (;;)
        {
@@ -105,7 +111,7 @@ void AVRISP_Task(void)
 
        V2Params_UpdateParamValues();
 
-       Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM);
+       Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPADDR);
 
        /* Check to see if a V2 Protocol command has been received */
        if (Endpoint_IsOUTReceived())
@@ -163,17 +169,14 @@ void UARTBridge_Task(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
        /* Disable watchdog if enabled by bootloader/fuses */
        MCUSR &= ~(1 << WDRF);
        wdt_disable();
 
        /* Disable clock division */
        clock_prescale_set(clock_div_1);
-
-       /* Hardware Initialization */
-       SoftUART_Init();
-       LEDs_Init();
-       USB_Init();
+#endif
 
        /* Disable JTAG debugging */
        MCUCR |= (1 << JTD);
@@ -189,6 +192,16 @@ void SetupHardware(void)
        /* Re-enable JTAG debugging */
        MCUCR &= ~(1 << JTD);
        MCUCR &= ~(1 << JTD);
+
+       /* Hardware Initialization */
+       SoftUART_Init();
+       LEDs_Init();
+       #if defined(RESET_TOGGLES_LIBUSB_COMPAT)
+       UpdateCurrentCompatibilityMode();
+       #endif
+
+       /* USB Stack Initialization */
+       USB_Init();
 }
 
 /** Event handler for the library USB Configuration Changed event. */
@@ -213,13 +226,10 @@ void EVENT_USB_Device_ConfigurationChanged(void)
        }
        else
        {
-               ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT,
-                                                           AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE);
+               ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1);
 
-               #if defined(LIBUSB_DRIVER_COMPAT)
-               ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN,
-                                                           AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE);
-               #endif
+               if ((AVRISP_DATA_IN_EPADDR & ENDPOINT_EPNUM_MASK) != (AVRISP_DATA_OUT_EPADDR & ENDPOINT_EPNUM_MASK))
+                 ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1);
 
                /* Configure the V2 protocol packet handler */
                V2Protocol_Init();
@@ -263,20 +273,22 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
  *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
  *  USB host.
  *
- *  \param[in]  wValue  Descriptor type and index to retrieve
- *  \param[in]  wIndex  Sub-index to retrieve (such as a localized string language)
- *  \param[out] DescriptorAddress  Address of the retrieved descriptor
+ *  \param[in]  wValue                 Descriptor type and index to retrieve
+ *  \param[in]  wIndex                 Sub-index to retrieve (such as a localized string language)
+ *  \param[out] DescriptorAddress      Address of the retrieved descriptor
+ *  \param[out] DescriptorMemorySpace  Memory space that the descriptor is stored in
  *
  *  \return Length of the retrieved descriptor in bytes, or NO_DESCRIPTOR if the descriptor was not found
  */
 uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
                                     const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
+                                    const void** const DescriptorAddress,
+                                           uint8_t* const DescriptorMemorySpace)
 {
        /* Return the correct descriptors based on the selected mode */
        if (CurrentFirmwareMode == MODE_USART_BRIDGE)
-         return USART_GetDescriptor(wValue, wIndex, DescriptorAddress);
+         return USART_GetDescriptor(wValue, wIndex, DescriptorAddress, DescriptorMemorySpace);
        else
-         return AVRISP_GetDescriptor(wValue, wIndex, DescriptorAddress);
+         return AVRISP_GetDescriptor(wValue, wIndex, DescriptorAddress, DescriptorMemorySpace);
 }