Mark build test makefiles as being incompatible with parallel make builds, as they...

[pub/USBasp.git] / LUFA / Drivers / Peripheral / AVR8 / ADC_AVR8.h

diff --git a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
index fe01730..d85fddc 100644 (file)
--- a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2011.
+     Copyright (C) Dean Camera, 2012.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -55,14 +55,14 @@
  *  \code
  *      // Initialize the ADC driver before first use
  *      ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
- *
+ *      
  *      // Must setup the ADC channel to read beforehand
  *      ADC_SetupChannel(1);
- *
+ *      
  *      // Perform a single conversion of the ADC channel 1
  *      ADC_GetChannelReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
  *      printf("Conversion Result: %d\r\n", ADC_GetResult());
- *
+ *      
  *      // Start reading ADC channel 1 in free running (continuous conversion) mode
  *      ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
  *      for (;;)
@@ -248,13 +248,13 @@
                                #define ADC_INT_TEMP_SENS           ((1 << 8) | (0x07 << MUX0))
                        #endif
 
-                       /** MUX mask define for the internal 1.1V bandgap channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
+                       /** MUX mask define for the internal 1.1V band-gap channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
                        #define ADC_1100MV_BANDGAP              (0x1E << MUX0)
 
                        /** Retrieves the ADC MUX mask for the given ADC channel number.
                         *
-                        *  \note This macro will only work correctly on channel numbers that are compile-time
-                        *        constants defined by the preprocessor.
+                        *  \attention This macro will only work correctly on channel numbers that are compile-time
+                        *             constants defined by the preprocessor.
                         *
                         *  \param[in] Channel  Index of the ADC channel whose MUX mask is to be retrieved.
                         */
@@ -268,9 +268,8 @@
                         *
                         *  \note This must only be called for ADC channels with are connected to a physical port
                         *        pin of the AVR, denoted by its special alternative function ADCx.
-                        *        \n\n
                         *
-                        *  \note The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
+                        *  \warning The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
                         *
                         *  \param[in] ChannelIndex  ADC channel number to set up for conversions.
                         */
@@ -311,9 +310,8 @@
                         *
                         *  \note This must only be called for ADC channels with are connected to a physical port
                         *        pin of the AVR, denoted by its special alternative function ADCx.
-                        *        \n\n
                         *
-                        *  \note The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
+                        *  \warning The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
                         *
                         *  \param[in] ChannelIndex  ADC channel number to set up for conversions.
                         */