Rename CDC demos to VirtualSerial.

[pub/USBasp.git] / Projects / AVRISP / AVRISP.txt

diff --git a/Projects/AVRISP/AVRISP.txt b/Projects/AVRISP/AVRISP.txt
index bed0a7a..c15c27f 100644 (file)
--- a/Projects/AVRISP/AVRISP.txt
+++ b/Projects/AVRISP/AVRISP.txt
@@ -54,10 +54,10 @@
  *  drivers. When promted, direct your OS to install Atmel's AVRISP-MKII drivers provided with AVRStudio.\r
  *\r
  *  Note that this design currently has several limitations:\r
  *  drivers. When promted, direct your OS to install Atmel's AVRISP-MKII drivers provided with AVRStudio.\r
  *\r
  *  Note that this design currently has several limitations:\r

- *    - Minimum target clock speed of 500KHz due to hardware SPI used\r
+ *    - Minimum ISP target clock speed of 500KHz due to hardware SPI used\r

  *    - No reversed/shorted target connector detection and notification\r
  *\r
  *    - No reversed/shorted target connector detection and notification\r
  *\r

- *  On AVR models with an ADC converter, ACC should be tied to 5V (e.g. VBUS) and the VTARGET_ADC_CHANNEL token should be\r
+ *  On AVR models with an ADC converter, AVCC should be tied to 5V (e.g. VBUS) and the VTARGET_ADC_CHANNEL token should be\r

  *  set to an appropriate ADC channel number in the project makefile for VTARGET detection to operate correctly. On models\r
  *  without an ADC converter, VTARGET will report at a fixed 5V level.\r
  *\r
  *  set to an appropriate ADC channel number in the project makefile for VTARGET detection to operate correctly. On models\r
  *  without an ADC converter, VTARGET will report at a fixed 5V level.\r
  *\r


@@ -115,7 +115,7 @@
  *   <tr>\r
  *    <td><b>Programmer Pin:</b></td>\r
  *    <td><b>Target Device Pin:</b></td>\r
  *   <tr>\r
  *    <td><b>Programmer Pin:</b></td>\r
  *    <td><b>Target Device Pin:</b></td>\r

- *    <td><b>ISP 6 Pin Layout:</b></td>\r
+ *    <td><b>PDI 6 Pin Layout:</b></td>\r

  *   </tr>\r
  *   <tr>\r
  *    <td>MISO</td>\r
  *   </tr>\r
  *   <tr>\r
  *    <td>MISO</td>\r


@@ -183,12 +183,12 @@
  *    <td>ADC channel number (on supported AVRs) to use for VTARGET level detection.</td> \r
  *   </tr>\r
  *   <tr>\r
  *    <td>ADC channel number (on supported AVRs) to use for VTARGET level detection.</td> \r
  *   </tr>\r
  *   <tr>\r

- *    <td>ENABLE_SPI_PROTOCOL</td>\r
+ *    <td>ENABLE_ISP_PROTOCOL</td>\r

  *    <td>Makefile CDEFS</td>\r
  *    <td>Define to enable SPI programming protocol support. <i>Ignored when compiled for the XPLAIN board.</i></td>  \r
  *   </tr>\r
  *   <tr>\r
  *    <td>Makefile CDEFS</td>\r
  *    <td>Define to enable SPI programming protocol support. <i>Ignored when compiled for the XPLAIN board.</i></td>  \r
  *   </tr>\r
  *   <tr>\r

- *    <td>ENABLE_XPROG_PROTOCOL</td>\r
+ *    <td>ENABLE_PDI_PROTOCOL</td>\r

  *    <td>Makefile CDEFS</td>\r
  *    <td>Define to enable XMEGA PDI programming protocol support. <i>Ignored when compiled for the XPLAIN board.</i></td>  \r
  *   </tr>\r
  *    <td>Makefile CDEFS</td>\r
  *    <td>Define to enable XMEGA PDI programming protocol support. <i>Ignored when compiled for the XPLAIN board.</i></td>  \r
  *   </tr>\r