/*
LUFA Library
- Copyright (C) Dean Camera, 2012.
+ Copyright (C) Dean Camera, 2013.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
- The author disclaim all warranties with regard to this
+ The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
* for the storage of large amounts of data into the Dataflash's non-volatile memory.
*
* If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/Dataflash.h file in the user project
- * directory. Otherwise, it will include the appropriate built in board driver header file.
+ * directory. Otherwise, it will include the appropriate built-in board driver header file.
*
* For possible \c BOARD makefile values, see \ref Group_BoardTypes.
*
* SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
* SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
* Dataflash_Init();
- *
+ *
* uint8_t WriteBuffer[DATAFLASH_PAGE_SIZE];
* uint8_t ReadBuffer[DATAFLASH_PAGE_SIZE];
- *
+ *
* // Fill page write buffer with a repeating pattern
* for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++)
* WriteBuffer[i] = (i & 0xFF);
- *
+ *
* // Must select the chip of interest first before operating on it
* Dataflash_SelectChip(DATAFLASH_CHIP1);
- *
+ *
* // Write to the Dataflash's first internal memory buffer
* printf("Writing data to first dataflash buffer:\r\n");
* Dataflash_SendByte(DF_CMD_BUFF1WRITE);
* Dataflash_SendAddressBytes(0, 0);
- *
+ *
* for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++)
* Dataflash_SendByte(WriteBuffer[i]);
- *
+ *
* // Commit the Dataflash's first memory buffer to the non-volatile FLASH memory
* printf("Committing page to non-volatile memory page index 5:\r\n");
* Dataflash_SendByte(DF_CMD_BUFF1TOMAINMEMWITHERASE);
* Dataflash_SendAddressBytes(5, 0);
* Dataflash_WaitWhileBusy();
- *
+ *
* // Read the page from non-volatile FLASH memory into the Dataflash's second memory buffer
* printf("Reading data into second dataflash buffer:\r\n");
* Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF2);
* Dataflash_SendAddressBytes(5, 0);
* Dataflash_WaitWhileBusy();
- *
+ *
* // Read the Dataflash's second internal memory buffer
* Dataflash_SendByte(DF_CMD_BUFF2READ);
* Dataflash_SendAddressBytes(0, 0);
- *
+ *
* for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++)
* ReadBuffer[i] = Dataflash_ReceiveByte();
- *
+ *
* // Deselect the chip after use
* Dataflash_DeselectChip();
* \endcode
#define __INCLUDE_FROM_DATAFLASH_H
/* Includes: */
- #include "../../Common/Common.h"
- #include "../Peripheral/SPI.h"
+ #include "../../Common/Common.h"
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
/* Inline Functions: */
/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
*
- * \note The microcontroller's SPI driver must be initialized before any of the dataflash commands are used.
+ * \note The microcontroller's physical interface driver connected to the Dataflash IC must be initialized before
+ * any of the dataflash commands are used. This is usually a SPI hardware port, but on some devices/boards may
+ * be a USART operating in SPI Master mode.
*/
static inline void Dataflash_Init(void);
/** Selects the given dataflash chip.
*
- * \param[in] ChipMask Mask of the Dataflash IC to select, in the form of \c DATAFLASH_CHIPn mask (where n is
+ * \param[in] ChipMask Mask of the Dataflash IC to select, in the form of a \c DATAFLASH_CHIPn mask (where n is
* the chip number).
*/
static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE;
/** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash.
*
- * \param[in] Byte of data to send to the dataflash
+ * \param[in] Byte Byte of data to send to the dataflash
*
* \return Last response byte from the dataflash
*/
/** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash.
*
- * \param[in] Byte of data to send to the dataflash
+ * \param[in] Byte Byte of data to send to the dataflash
*/
static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
#include "AVR8/EVK527/Dataflash.h"
#elif (BOARD == BOARD_A3BU_XPLAINED)
#include "XMEGA/A3BU_XPLAINED/Dataflash.h"
+ #elif (BOARD == BOARD_B1_XPLAINED)
+ #include "XMEGA/B1_XPLAINED/Dataflash.h"
#else
#include "Board/Dataflash.h"
#endif
projects / pub / USBasp.git / blobdiff