* of the various clocks within the device to clock the various peripherals.
*/
-/** \ingroup Group_PlatformDrivers
- * \defgroup Group_PlatformDrivers_UC3Clocks UC3 Clock Management Driver - LUFA/Platform/UC3/ClockManagement.h
+/** \ingroup Group_PlatformDrivers_UC3
+ * \defgroup Group_PlatformDrivers_UC3Clocks Clock Management Driver - LUFA/Platform/UC3/ClockManagement.h
* \brief Module Clock Driver for the AVR32 UC3 microcontrollers.
*
* \section Sec_Dependencies Module Source Dependencies
* Usage Example:
* \code
* #include <LUFA/Platform/UC3/ClockManagement.h>
- *
+ *
* void main(void)
* {
* // Start the master external oscillator which will be used as the main clock reference
* AVR32CLK_StartExternalOscillator(0, EXOSC_MODE_8MHZ_OR_MORE, EXOSC_START_0CLK);
- *
+ *
* // Start the PLL for the CPU clock, switch CPU to it
* AVR32CLK_StartPLL(0, CLOCK_SRC_OSC0, 12000000, F_CPU);
* AVR32CLK_SetCPUClockSource(CLOCK_SRC_PLL0, F_CPU);
- *
+ *
* // Start the PLL for the USB Generic Clock module
* AVR32CLK_StartPLL(1, CLOCK_SRC_OSC0, 12000000, 48000000);
* }
#define _UC3_CLOCK_MANAGEMENT_H_
/* Includes: */
- #include <LUFA/Common/Common.h>
+ #include "../../Common/Common.h"
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
EXOSC_MODE_8MHZ_OR_MORE = AVR32_PM_OSCCTRL0_MODE_CRYSTAL_G3, /**< External crystal oscillator equal to or faster than 8MHz. */
};
- /** Enum for the possible external oscillator statup times. */
+ /** Enum for the possible external oscillator startup times. */
enum UC3_Extern_OSC_ClockStartup_t
{
EXOSC_START_0CLK = AVR32_PM_OSCCTRL0_STARTUP_0_RCOSC, /**< Immediate startup, no delay. */
- EXOSC_START_64CLK = AVR32_PM_OSCCTRL0_STARTUP_64_RCOSC, /**< Wait 64 clock cyles before startup for stability. */
- EXOSC_START_128CLK = AVR32_PM_OSCCTRL0_STARTUP_128_RCOSC, /**< Wait 128 clock cyles before startup for stability. */
- EXOSC_START_2048CLK = AVR32_PM_OSCCTRL0_STARTUP_2048_RCOSC, /**< Wait 2048 clock cyles before startup for stability. */
- EXOSC_START_4096CLK = AVR32_PM_OSCCTRL0_STARTUP_4096_RCOSC, /**< Wait 4096 clock cyles before startup for stability. */
- EXOSC_START_8192CLK = AVR32_PM_OSCCTRL0_STARTUP_8192_RCOSC, /**< Wait 8192 clock cyles before startup for stability. */
- EXOSC_START_16384CLK = AVR32_PM_OSCCTRL0_STARTUP_16384_RCOSC, /**< Wait 16384 clock cyles before startup for stability. */
+ EXOSC_START_64CLK = AVR32_PM_OSCCTRL0_STARTUP_64_RCOSC, /**< Wait 64 clock cycles before startup for stability. */
+ EXOSC_START_128CLK = AVR32_PM_OSCCTRL0_STARTUP_128_RCOSC, /**< Wait 128 clock cycles before startup for stability. */
+ EXOSC_START_2048CLK = AVR32_PM_OSCCTRL0_STARTUP_2048_RCOSC, /**< Wait 2048 clock cycles before startup for stability. */
+ EXOSC_START_4096CLK = AVR32_PM_OSCCTRL0_STARTUP_4096_RCOSC, /**< Wait 4096 clock cycles before startup for stability. */
+ EXOSC_START_8192CLK = AVR32_PM_OSCCTRL0_STARTUP_8192_RCOSC, /**< Wait 8192 clock cycles before startup for stability. */
+ EXOSC_START_16384CLK = AVR32_PM_OSCCTRL0_STARTUP_16384_RCOSC, /**< Wait 16384 clock cycles before startup for stability. */
};
/** Enum for the possible module clock sources. */
/** Starts the given PLL of the UC3 microcontroller, with the given options. This routine blocks until the PLL is ready for use.
*
- * \note The output frequency must be equal to or greater than the source frequency.
+ * \attention The output frequency must be equal to or greater than the source frequency.
*
* \param[in] Channel Index of the PLL to start.
* \param[in] Source Clock source for the PLL, a value from \ref UC3_System_ClockSource_t.
const uint32_t SourceFreq,
const uint32_t Frequency)
{
+ if (Channel >= AVR32_PM_GCLK_NUM)
+ return false;
+
+ if (SourceFreq < Frequency)
+ return false;
+
switch (Source)
{
case CLOCK_SRC_OSC0:
return false;
}
- if (SourceFreq < Frequency)
- return false;
-
AVR32_PM.GCCTRL[Channel].diven = (SourceFreq > Frequency) ? true : false;
AVR32_PM.GCCTRL[Channel].div = (((SourceFreq / Frequency) - 1) / 2);
AVR32_PM.GCCTRL[Channel].cen = true;
/** Stops the given generic clock of the UC3 microcontroller.
*
* \param[in] Channel Index of the generic clock to stop.
+ *
+ * \return Boolean \c true if the generic clock was sucessfully stopped, \c false if invalid parameters specified.
*/
- static inline void AVR32CLK_StopGenericClock(const uint8_t Channel) ATTR_ALWAYS_INLINE;
- static inline void AVR32CLK_StopGenericClock(const uint8_t Channel)
+ static inline bool AVR32CLK_StopGenericClock(const uint8_t Channel) ATTR_ALWAYS_INLINE;
+ static inline bool AVR32CLK_StopGenericClock(const uint8_t Channel)
{
+ if (Channel >= AVR32_PM_GCLK_NUM)
+ return false;
+
AVR32_PM.GCCTRL[Channel].cen = false;
+
+ return true;
}
/** Sets the clock source for the main microcontroller core. The given clock source should be configured
static inline bool AVR32CLK_SetCPUClockSource(const uint8_t Source,
const uint32_t SourceFreq)
{
- AVR32_FLASHC.FCR.fws = (SourceFreq > 30000000) ? true : false;
+ if (SourceFreq > AVR32_PM_CPU_MAX_FREQ)
+ return false;
+ AVR32_FLASHC.FCR.fws = (SourceFreq > AVR32_FLASHC_FWS_0_MAX_FREQ) ? true : false;
+
switch (Source)
{
#if defined(AVR32_PM_MCCTRL_MCSEL_SLOW)
projects / pub / USBasp.git / blobdiff