Mark build test makefiles as being incompatible with parallel make builds, as they...

[pub/USBasp.git] / LUFA / Drivers / USB / USB.h

diff --git a/LUFA/Drivers/USB/USB.h b/LUFA/Drivers/USB/USB.h
index edb16e2..512f702 100644 (file)
--- a/LUFA/Drivers/USB/USB.h
+++ b/LUFA/Drivers/USB/USB.h
@@ -41,7 +41,7 @@
  *
  *  \section Sec_Dependencies Module Source Dependencies
  *  The following files must be built with any user project that uses this module:
- *    - LUFA/Drivers/USB/Core/ConfigDescriptor.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
+ *    - LUFA/Drivers/USB/Core/ConfigDescriptors.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
  *    - LUFA/Drivers/USB/Core/DeviceStandardReq.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
  *    - LUFA/Drivers/USB/Core/Events.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
  *    - LUFA/Drivers/USB/Core/HostStandardReq.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
@@ -158,9 +158,6 @@
  *  before the class driver is used. Each Device mode Class driver typically contains a set of configuration parameters
  *  for the endpoint size/number of the associated logical USB interface, plus any class-specific configuration parameters.
  *
- *  \note The \c State section of the \c USB_ClassInfo_* structures are designed to be controlled by the Class Drivers only
- *        for maintaining the Class Driver instance's state, and should not normally be altered by the user application.
- *
  *  The following is an example of a properly initialized instance of the Audio Class Driver structure:
  *
  *  \code
@@ -169,9 +166,12 @@
  *      .Config =
  *          {
  *              .StreamingInterfaceNumber = 1,
- *
- *              .DataINEndpointNumber     = 1,
- *              .DataINEndpointSize       = 256,
+ *              .DataINEndpoint           =
+ *                  {
+ *                      .Address          = (ENDPOINT_DIR_IN | 1),
+ *                      .Size             = 64,
+ *                      .Banks            = 1,
+ *                  },
  *          },
  *  };
  *  \endcode
@@ -189,7 +189,7 @@
  *  void EVENT_USB_Device_ConfigurationChanged(void)
  *  {
  *      LEDs_SetAllLEDs(LEDMASK_USB_READY);
- *
+ *      
  *      if (!(Audio_Device_ConfigureEndpoints(&My_Audio_Interface)))
  *          LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
  *  }
@@ -205,14 +205,14 @@
  *  int main(void)
  *  {
  *      SetupHardware();
- *
+ *      
  *      LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
- *
+ *      
  *      for (;;)
  *      {
  *          if (USB_DeviceState != DEVICE_STATE_Configured)
  *            Create_And_Process_Samples();
- *
+ *          
  *          Audio_Device_USBTask(&My_Audio_Interface);
  *          USB_USBTask();
  *      }
@@ -258,9 +258,6 @@
  *  before the class driver is used. Each Device mode Class driver typically contains a set of configuration parameters
  *  for the endpoint size/number of the associated logical USB interface, plus any class-specific configuration parameters.
  *
- *  \note The \c State section of the \c USB_ClassInfo_* structures are designed to be controlled by the Class Drivers only
- *        for maintaining the Class Driver instance's state, and should not normally be altered by the user application.
- *
  *  The following is an example of a properly initialized instance of the MIDI Host Class Driver structure:
  *
  *  \code
@@ -268,11 +265,18 @@
  *  {
  *      .Config =
  *          {
- *              .DataINPipeNumber       = 1,
- *              .DataINPipeDoubleBank   = false,
- *
- *              .DataOUTPipeNumber      = 2,
- *              .DataOUTPipeDoubleBank  = false,
+ *              .DataINPipe             =
+ *                  {
+ *                      .Address        = (PIPE_DIR_IN  | 1),
+ *                      .Size           = 64,
+ *                      .Banks          = 1,
+ *                  },
+ *              .DataOUTPipe            =
+ *                  {
+ *                      .Address        = (PIPE_DIR_OUT | 2),
+ *                      .Size           = 64,
+ *                      .Banks          = 1,
+ *                  },
  *          },
  *  };
  *  \endcode
@@ -289,30 +293,30 @@
  *  void EVENT_USB_Host_DeviceEnumerationComplete(void)
  *  {
  *      LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
- *  
+ *      
  *      uint16_t ConfigDescriptorSize;
  *      uint8_t  ConfigDescriptorData[512];
- *  
+ *      
  *      if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
  *                                             sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
  *      {
  *          LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
  *          return;
  *      }
- *  
+ *      
  *      if (MIDI_Host_ConfigurePipes(&Keyboard_MIDI_Interface,
  *                                   ConfigDescriptorSize, ConfigDescriptorData) != MIDI_ENUMERROR_NoError)
  *      {
  *          LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
  *          return;
  *      }
- *  
+ *      
  *      if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
  *      {
  *          LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
  *          return;
  *      }
- *  
+ *      
  *      LEDs_SetAllLEDs(LEDMASK_USB_READY);
  *  }
  *  \endcode
@@ -338,14 +342,14 @@
  *  int main(void)
  *  {
  *      SetupHardware();
- *
+ *      
  *      LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
- *
+ *      
  *      for (;;)
  *      {
  *          if (USB_HostState != HOST_STATE_Configured)
  *              Create_And_Process_Samples();
- *
+ *          
  *          MIDI_Host_USBTask(&My_Audio_Interface);
  *          USB_USBTask();
  *      }
@@ -378,7 +382,7 @@
                #include "Core/USBTask.h"
                #include "Core/Events.h"
                #include "Core/StdDescriptors.h"
-               #include "Core/ConfigDescriptor.h"
+               #include "Core/ConfigDescriptors.h"
                #include "Core/USBController.h"
                #include "Core/USBInterrupt.h"