Mark build test makefiles as being incompatible with parallel make builds, as they...

[pub/USBasp.git] / LUFA / Drivers / Board / LEDs.h

diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index 1e23d74..21f89aa 100644 (file)
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2011.
+     Copyright (C) Dean Camera, 2012.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -63,7 +63,7 @@
  *
  *  \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
  *        a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
- *        If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D
+ *        If other behavior is desired, either alias the remaining LED masks to existing LED masks via the -D
  *        switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when
  *        a non-existing LED is referenced in application code. Note that this means that it is possible to make
  *        compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)
@@ -76,21 +76,21 @@
  *  \code
  *      // Initialize the board LED driver before first use
  *      LEDs_Init();
- *
+ *      
  *      // Turn on each of the four LEDs in turn
- *      LEDs_SetAllLEDs(LEDS_LED1); 
+ *      LEDs_SetAllLEDs(LEDS_LED1);
  *      Delay_MS(500);
- *      LEDs_SetAllLEDs(LEDS_LED1); 
+ *      LEDs_SetAllLEDs(LEDS_LED2);
  *      Delay_MS(500);
- *      LEDs_SetAllLEDs(LEDS_LED1); 
+ *      LEDs_SetAllLEDs(LEDS_LED3);
  *      Delay_MS(500);
- *      LEDs_SetAllLEDs(LEDS_LED1); 
+ *      LEDs_SetAllLEDs(LEDS_LED4);
  *      Delay_MS(500);
- *
+ *      
  *      // Turn on all LEDs
  *      LEDs_SetAllLEDs(LEDS_ALL_LEDS);
  *      Delay_MS(1000);
- *
+ *      
  *      // Turn on LED 1, turn off LED 2, leaving LEDs 3 and 4 in their current state
  *      LEDs_ChangeLEDs((LEDS_LED1 | LEDS_LED2), LEDS_LED1);
  *  \endcode
@@ -109,6 +109,7 @@
 
                #if (BOARD == BOARD_NONE)
                        static inline void LEDs_Init(void) {};
+                       static inline void LEDs_Disable(void) {};
                        static inline void LEDs_TurnOnLEDs(const uint_reg_t LEDMask) {};
                        static inline void LEDs_TurnOffLEDs(const uint_reg_t LEDMask) {};
                        static inline void LEDs_SetAllLEDs(const uint_reg_t LEDMask) {};
@@ -131,7 +132,7 @@
                        #include "AVR8/BUMBLEB/LEDs.h"
                #elif (BOARD == BOARD_EVK527)
                        #include "AVR8/EVK527/LEDs.h"
-               #elif (BOARD == BOARD_TEENSY)
+               #elif ((BOARD == BOARD_TEENSY) || (BOARD == BOARD_TEENSY2))
                        #include "AVR8/TEENSY/LEDs.h"
                #elif (BOARD == BOARD_USBTINYMKII)
                        #include "AVR8/USBTINYMKII/LEDs.h"
@@ -166,11 +167,30 @@
                #elif (BOARD == BOARD_EVK1101)
                        #include "UC3/EVK1101/LEDs.h"
                #elif (BOARD == BOARD_TUL)
-                       #include "AVR8/TUL/LEDs.h"      
+                       #include "AVR8/TUL/LEDs.h"
                #elif (BOARD == BOARD_EVK1100)
                        #include "UC3/EVK1100/LEDs.h"
                #elif (BOARD == BOARD_EVK1104)
                        #include "UC3/EVK1104/LEDs.h"
+               #elif (BOARD == BOARD_A3BU_XPLAINED)
+                       #include "XMEGA/A3BU_XPLAINED/LEDs.h"
+               #elif ((BOARD == BOARD_USB2AX) || (BOARD == BOARD_USB2AX_V3))
+                       #include "AVR8/USB2AX/LEDs.h"
+               #elif ((BOARD == BOARD_MICROPENDOUS_REV1) || (BOARD == BOARD_MICROPENDOUS_REV2) || \
+                      (BOARD == BOARD_MICROPENDOUS_32U2))
+                       #include "AVR8/MICROPENDOUS/LEDs.h"
+               #elif (BOARD == BOARD_B1_XPLAINED)
+                       #include "XMEGA/B1_XPLAINED/LEDs.h"
+               #elif (BOARD == BOARD_MULTIO)
+                       #include "AVR8/MULTIO/LEDs.h"
+               #elif (BOARD == BOARD_BIGMULTIO)
+                       #include "AVR8/BIGMULTIO/LEDs.h"
+               #elif (BOARD == BOARD_DUCE)
+                       #include "AVR8/DUCE/LEDs.h"
+               #elif (BOARD == BOARD_OLIMEX32U4)
+                       #include "AVR8/OLIMEX32U4/LEDs.h"               
+               #elif (BOARD == BOARD_OLIMEXT32U4)
+                       #include "AVR8/OLIMEXT32U4/LEDs.h"              
                #else
                        #include "Board/LEDs.h"
                #endif
@@ -201,6 +221,9 @@
                 */
                static inline void LEDs_Init(void);
 
+               /** Disables the board LED driver, releasing the I/O pins back to their default high-impedance input mode. */
+               static inline void LEDs_Disable(void);
+
                /** Turns on the LEDs specified in the given LED mask.
                 *
                 *  \param[in] LEDMask  Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).