/*\r
LUFA Library\r
- Copyright (C) Dean Camera, 2009.\r
+ Copyright (C) Dean Camera, 2010.\r
\r
dean [at] fourwalledcubicle [dot] com\r
www.fourwalledcubicle.com\r
*/\r
\r
/*\r
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, and distribute this software\r
- and its documentation for any purpose and without fee is hereby\r
- granted, provided that the above copyright notice appear in all\r
- copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting\r
- documentation, and that the name of the author not be used in\r
- advertising or publicity pertaining to distribution of the\r
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
+\r
+ Permission to use, copy, modify, distribute, and sell this \r
+ software and its documentation for any purpose is hereby granted\r
+ without fee, provided that the above copyright notice appear in \r
+ all copies and that both that the copyright notice and this\r
+ permission notice and warranty disclaimer appear in supporting \r
+ documentation, and that the name of the author not be used in \r
+ advertising or publicity pertaining to distribution of the \r
software without specific, written prior permission.\r
\r
The author disclaim all warranties with regard to this\r
#include "GenericHIDHost.h"\r
\r
/** Main program entry point. This routine configures the hardware required by the application, then\r
- * starts the scheduler to run the application tasks.\r
+ * enters a loop to run the application tasks in sequence.\r
*/\r
int main(void)\r
{\r
SetupHardware();\r
\r
- puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY\r
- "Generic HID Host Demo running.\r\n" ESC_INVERSE_OFF));\r
+ puts_P(PSTR(ESC_FG_CYAN "Generic HID Host Demo running.\r\n" ESC_FG_WHITE));\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
\r
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and\r
* starts the library USB task to begin the enumeration and USB management process.\r
*/\r
-void EVENT_USB_DeviceAttached(void)\r
+void EVENT_USB_Host_DeviceAttached(void)\r
{\r
- puts_P(PSTR("Device Attached.\r\n"));\r
+ puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));\r
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
}\r
\r
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and\r
* stops the library USB task management process.\r
*/\r
-void EVENT_USB_DeviceUnattached(void)\r
+void EVENT_USB_Host_DeviceUnattached(void)\r
{\r
- puts_P(PSTR("Device Unattached.\r\n"));\r
+ puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE));\r
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
}\r
\r
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully\r
* enumerated by the host and is now ready to be used by the application.\r
*/\r
-void EVENT_USB_DeviceEnumerationComplete(void)\r
+void EVENT_USB_Host_DeviceEnumerationComplete(void)\r
{\r
LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
}\r
\r
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */\r
-void EVENT_USB_HostError(const uint8_t ErrorCode)\r
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)\r
{\r
USB_ShutDown();\r
\r
- puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));\r
- printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);\r
+ printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"\r
+ " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
for(;;);\r
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while\r
* enumerating an attached USB device.\r
*/\r
-void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)\r
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)\r
{\r
- puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));\r
- printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);\r
- printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);\r
- printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);\r
+ printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"\r
+ " -- Error Code %d\r\n"\r
+ " -- Sub Error Code %d\r\n"\r
+ " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
}\r
*\r
* \param[in] ReportOUTData Buffer containing the report to send to the device\r
* \param[in] ReportIndex Index of the report in the device (zero if the device does not use multiple reports)\r
- * \param[in] ReportType Type of report to send, either HID_REPORTTYPE_OUTPUT or HID_REPORTTYPE_FEATURE\r
+ * \param[in] ReportType Type of report to send, either REPORT_TYPE_OUT or REPORT_TYPE_FEATURE\r
* \param[in] ReportLength Length of the report to send\r
*/\r
void WriteNextReport(uint8_t* ReportOUTData, uint8_t ReportIndex, uint8_t ReportType, uint16_t ReportLength)\r
{\r
- /* Select and unfreeze HID data OUT pipe */\r
+ /* Select the HID data OUT pipe */\r
Pipe_SelectPipe(HID_DATA_OUT_PIPE);\r
\r
/* Not all HID devices have an OUT endpoint (some require OUT reports to be sent over the\r
* control endpoint instead) - check to see if the OUT endpoint has been initialized */\r
- if (Pipe_IsConfigured())\r
+ if (Pipe_IsConfigured() && (ReportType == REPORT_TYPE_OUT))\r
{\r
Pipe_Unfreeze();\r
\r
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)\r
{\r
if (ErrorCode == ControlError)\r
- puts_P(PSTR("Control Error (Get Configuration).\r\n"));\r
+ puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));\r
else\r
- puts_P(PSTR("Invalid Device.\r\n"));\r
+ puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));\r
\r
- printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
+ printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
/* Indicate error status */\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
\r
/* Wait until USB device disconnected */\r
- while (USB_IsConnected);\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */\r
if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)\r
{\r
- puts_P(PSTR("Control Error (Set Configuration).\r\n"));\r
- printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
+ printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"\r
+ " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
/* Indicate error status */\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
\r
/* Wait until USB device disconnected */\r
- while (USB_IsConnected);\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
+ puts_P(PSTR("HID Device Enumerated.\r\n"));\r
+\r
USB_HostState = HOST_STATE_Configured;\r
break;\r
case HOST_STATE_Configured:\r
- puts_P(PSTR("HID Device Enumerated.\r\n"));\r
- \r
- USB_HostState = HOST_STATE_Ready;\r
- break;\r
- case HOST_STATE_Ready:\r
ReadNextReport();\r
\r
break;\r
projects / pub / USBasp.git / blobdiff