#include "MouseHostWithParser.h"\r
\r
/** Main program entry point. This routine configures the hardware required by the application, then\r
- * starts the scheduler to run the application tasks.\r
+ * enters a loop to run the application tasks in sequence.\r
*/\r
int main(void)\r
{\r
SetupHardware();\r
\r
- puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY\r
- "Mouse HID Parser Host Demo running.\r\n" ESC_INVERSE_OFF));\r
+ puts_P(PSTR(ESC_FG_CYAN "Mouse HID Parser Host Demo running.\r\n" ESC_FG_WHITE));\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
\r
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and\r
* starts the library USB task to begin the enumeration and USB management process.\r
*/\r
-void EVENT_USB_DeviceAttached(void)\r
+void EVENT_USB_Host_DeviceAttached(void)\r
{\r
- puts_P(PSTR("Device Attached.\r\n"));\r
+ puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));\r
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
}\r
\r
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and\r
* stops the library USB task management process.\r
*/\r
-void EVENT_USB_DeviceUnattached(void)\r
+void EVENT_USB_Host_DeviceUnattached(void)\r
{\r
- puts_P(PSTR("Device Unattached.\r\n"));\r
+ puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE));\r
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
}\r
\r
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully\r
* enumerated by the host and is now ready to be used by the application.\r
*/\r
-void EVENT_USB_DeviceEnumerationComplete(void)\r
+void EVENT_USB_Host_DeviceEnumerationComplete(void)\r
{\r
LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
}\r
\r
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */\r
-void EVENT_USB_HostError(const uint8_t ErrorCode)\r
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)\r
{\r
USB_ShutDown();\r
\r
- puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));\r
- printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);\r
+ printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"\r
+ " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
for(;;);\r
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while\r
* enumerating an attached USB device.\r
*/\r
-void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)\r
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)\r
{\r
- puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));\r
- printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);\r
- printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);\r
- printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);\r
+ printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"\r
+ " -- Error Code %d\r\n"\r
+ " -- Sub Error Code %d\r\n"\r
+ " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
}\r
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)\r
{\r
if (ErrorCode == ControlError)\r
- puts_P(PSTR("Control Error (Get Configuration).\r\n"));\r
+ puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));\r
else\r
- puts_P(PSTR("Invalid Device.\r\n"));\r
+ puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));\r
\r
- printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
+ printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
/* Indicate error via status LEDs */\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
\r
/* Wait until USB device disconnected */\r
- while (USB_IsConnected);\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */\r
if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)\r
{\r
- puts_P(PSTR("Control Error (Set Configuration).\r\n"));\r
- printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
+ printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"\r
+ " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
/* Indicate error via status LEDs */\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
\r
/* Wait until USB device disconnected */\r
- while (USB_IsConnected);\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
}\r
\r
- USB_HostState = HOST_STATE_Configured;\r
- break;\r
- case HOST_STATE_Configured:\r
- puts_P(PSTR("Processing HID Report.\r\n"));\r
+ printf_P(PSTR("Processing HID Report (Size %d Bytes).\r\n"), HIDReportSize);\r
\r
/* Get and process the device's first HID report descriptor */\r
if ((ErrorCode = GetHIDReportData()) != ParseSuccessful)\r
{\r
- puts_P(PSTR("Report Parse Error.\r\n"));\r
- printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
+ puts_P(PSTR(ESC_FG_RED "Report Parse Error.\r\n"));\r
+\r
+ if (!(HIDReportInfo.TotalReportItems))\r
+ puts_P(PSTR("Not a valid Mouse." ESC_FG_WHITE));\r
+ else\r
+ printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
/* Indicate error via status LEDs */\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
\r
/* Wait until USB device disconnected */\r
- while (USB_IsConnected);\r
- break; \r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
+ break;\r
}\r
+ \r
+ printf("Total Reports: %d\r\n", HIDReportInfo.TotalDeviceReports);\r
\r
- puts_P(PSTR("Mouse Enumerated.\r\n"));\r
+ for (uint8_t i = 0; i < HIDReportInfo.TotalDeviceReports; i++)\r
+ {\r
+ HID_ReportSizeInfo_t* CurrReportIDInfo = &HIDReportInfo.ReportIDSizes[i];\r
\r
- USB_HostState = HOST_STATE_Ready;\r
+ uint8_t ReportSizeInBits = CurrReportIDInfo->ReportSizeBits[REPORT_ITEM_TYPE_In];\r
+ uint8_t ReportSizeOutBits = CurrReportIDInfo->ReportSizeBits[REPORT_ITEM_TYPE_Out];\r
+ uint8_t ReportSizeFeatureBits = CurrReportIDInfo->ReportSizeBits[REPORT_ITEM_TYPE_Feature];\r
+\r
+ /* Print out the byte sizes of each report within the device */\r
+ printf_P(PSTR(" + Report ID %d - In: %d bytes, Out: %d bytes, Feature: %d bytes\r\n"),\r
+ CurrReportIDInfo->ReportID,\r
+ ((ReportSizeInBits >> 3) + ((ReportSizeInBits & 0x07) != 0)),\r
+ ((ReportSizeOutBits >> 3) + ((ReportSizeOutBits & 0x07) != 0)),\r
+ ((ReportSizeFeatureBits >> 3) + ((ReportSizeFeatureBits & 0x07) != 0)));\r
+ }\r
+\r
+ puts_P(PSTR("Mouse Enumerated.\r\n"));\r
+\r
+ USB_HostState = HOST_STATE_Configured;\r
break;\r
- case HOST_STATE_Ready:\r
+ case HOST_STATE_Configured:\r
/* Select and unfreeze mouse data pipe */\r
Pipe_SelectPipe(MOUSE_DATAPIPE); \r
Pipe_Unfreeze();\r
-\r
+ \r
/* Check to see if a packet has been received */\r
if (Pipe_IsINReceived())\r
{\r
\r
bool FoundData;\r
\r
- if ((ReportItem->Attributes.Usage.Page == USAGE_PAGE_BUTTON) &&\r
- (ReportItem->ItemType == REPORT_ITEM_TYPE_In))\r
+ if ((ReportItem->Attributes.Usage.Page == USAGE_PAGE_BUTTON) &&\r
+ (ReportItem->ItemType == REPORT_ITEM_TYPE_In))\r
{\r
/* Get the mouse button value */\r
FoundData = USB_GetHIDReportItemInfo(MouseReport, ReportItem);\r
LEDMask = LEDS_ALL_LEDS;\r
}\r
else if ((ReportItem->Attributes.Usage.Page == USAGE_PAGE_GENERIC_DCTRL) &&\r
+ (ReportItem->Attributes.Usage.Usage == USAGE_SCROLL_WHEEL) &&\r
+ (ReportItem->ItemType == REPORT_ITEM_TYPE_In))\r
+ {\r
+ /* Get the mouse wheel value if it is contained within the current \r
+ * report, if not, skip to the next item in the parser list\r
+ */\r
+ if (!(USB_GetHIDReportItemInfo(MouseReport, ReportItem)))\r
+ continue; \r
+\r
+ int16_t WheelDelta = HID_ALIGN_DATA(ReportItem, int16_t);\r
+ \r
+ if (WheelDelta)\r
+ LEDMask = (LEDS_LED1 | LEDS_LED2 | ((WheelDelta > 0) ? LEDS_LED3 : LEDS_LED4));\r
+ }\r
+ else if ((ReportItem->Attributes.Usage.Page == USAGE_PAGE_GENERIC_DCTRL) &&\r
((ReportItem->Attributes.Usage.Usage == USAGE_X) ||\r
(ReportItem->Attributes.Usage.Usage == USAGE_Y)) &&\r
(ReportItem->ItemType == REPORT_ITEM_TYPE_In))\r
if (!(FoundData))\r
continue;\r
\r
- int16_t DeltaMovement;\r
- \r
- if (ReportItem->Attributes.BitSize > 8)\r
- DeltaMovement = (int16_t)ReportItem->Value;\r
- else\r
- DeltaMovement = (int8_t)ReportItem->Value;\r
+ int16_t DeltaMovement = (int16_t)(ReportItem->Value << (16 - ReportItem->Attributes.BitSize));\r
\r
/* Determine if the report is for the X or Y delta movement */\r
if (ReportItem->Attributes.Usage.Usage == USAGE_X)\r
projects / pub / USBasp.git / blobdiff