Update UC3 platform driver support to use the bitmasks defined in the header files...

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / ISP / ISPTarget.c

diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
index f08ee6a..9e7260a 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
@@ -161,7 +161,7 @@ void ISPTarget_EnableTargetISP(void)
                DDRB  |= ((1 << 1) | (1 << 2));
                PORTB |= ((1 << 0) | (1 << 3));
 
-               ISPTarget_ConfigureSoftwareISP(SCKDuration);
+               ISPTarget_ConfigureSoftwareSPI(SCKDuration);
        }
 }
 
@@ -185,7 +185,7 @@ void ISPTarget_DisableTargetISP(void)
        }
 }
 
-/** Configures the AVR to produce a .5MHz rescue clock out of the OCR1A pin of the AVR, so
+/** Configures the AVR to produce a 4MHz rescue clock out of the OCR1A pin of the AVR, so
  *  that it can be fed into the XTAL1 pin of an AVR whose fuses have been mis-configured for
  *  an external clock rather than a crystal. When used, the ISP speed must be 125KHz for this
  *  functionality to work correctly.
@@ -217,14 +217,14 @@ void ISPTarget_ConfigureRescueClock(void)
        #endif
 }
 
-/** Configures the AVR's timer ready to produce software ISP for the slower ISP speeds that
+/** Configures the AVR's timer ready to produce software SPI for the slower ISP speeds that
  *  cannot be obtained when using the AVR's hardware SPI module.
  *
  *  \param[in] SCKDuration  Duration of the desired software ISP SCK clock
  */
-void ISPTarget_ConfigureSoftwareISP(const uint8_t SCKDuration)
+void ISPTarget_ConfigureSoftwareSPI(const uint8_t SCKDuration)
 {
-       /* Configure Timer 1 for software ISP using the specified SCK duration */
+       /* Configure Timer 1 for software SPI using the specified SCK duration */
        TIMSK1 = (1 << OCIE1A);
        TCNT1  = 0;
        OCR1A  = pgm_read_word(&TimerCompareFromSCKDuration[SCKDuration - sizeof(SPIMaskFromSCKDuration)]);