Mark build test makefiles as being incompatible with parallel make builds, as they...

[pub/USBasp.git] / Demos / Device / ClassDriver / MassStorageKeyboard / Descriptors.c

diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c
index a5d7973..c5d9201 100644 (file)
--- a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c
+++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
 /*
              LUFA Library

-     Copyright (C) Dean Camera, 2011.
+     Copyright (C) Dean Camera, 2012.

 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)

   Copyright 2010  Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net)
 
   Permission to use, copy, modify, distribute, and sell this
   Copyright 2010  Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net)
 
   Permission to use, copy, modify, distribute, and sell this


@@ -38,17 +38,6 @@
 
 #include "Descriptors.h"
 
 
 #include "Descriptors.h"
 

-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
-       #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif

 
 /** HID class report descriptor. This is a special descriptor constructed with values from the
  *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
 
 /** HID class report descriptor. This is a special descriptor constructed with values from the
  *  USBIF HID class specification to describe the reports and capabilities of the HID device. This


@@ -56,40 +45,12 @@
  *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
  *  more details on HID report descriptors.
  */
  *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
  *  more details on HID report descriptors.
  */

-USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =

 {
 {

-       HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
-       HID_RI_USAGE(8, 0x06), /* Keyboard */
-       HID_RI_COLLECTION(8, 0x01), /* Application */
-           HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */
-           HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */
-           HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */
-           HID_RI_LOGICAL_MINIMUM(8, 0x00),
-           HID_RI_LOGICAL_MAXIMUM(8, 0x01),
-           HID_RI_REPORT_SIZE(8, 0x01),
-           HID_RI_REPORT_COUNT(8, 0x08),
-           HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
-           HID_RI_REPORT_COUNT(8, 0x01),
-           HID_RI_REPORT_SIZE(8, 0x08),
-           HID_RI_INPUT(8, HID_IOF_CONSTANT),
-           HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */
-           HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */
-           HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */
-           HID_RI_REPORT_COUNT(8, 0x05),
-           HID_RI_REPORT_SIZE(8, 0x01),
-           HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
-           HID_RI_REPORT_COUNT(8, 0x01),
-           HID_RI_REPORT_SIZE(8, 0x03),
-           HID_RI_OUTPUT(8, HID_IOF_CONSTANT),
-           HID_RI_LOGICAL_MINIMUM(8, 0x00),
-           HID_RI_LOGICAL_MAXIMUM(8, 0x65),
-           HID_RI_USAGE_PAGE(8, 0x07), /* Keyboard */
-           HID_RI_USAGE_MINIMUM(8, 0x00), /* Reserved (no event indicated) */
-           HID_RI_USAGE_MAXIMUM(8, 0x65), /* Keyboard Application */
-           HID_RI_REPORT_COUNT(8, 0x06),
-           HID_RI_REPORT_SIZE(8, 0x08),
-           HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
-       HID_RI_END_COLLECTION(0),
+       /* Use the HID class driver's standard Keyboard report.
+        *   Max simultaneous keys: 6
+        */
+       HID_DESCRIPTOR_KEYBOARD(6)

 };
 
 /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
 };
 
 /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall


@@ -97,7 +58,7 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
  *  number of device configurations. The descriptor is read out by the USB host when the enumeration
  *  process begins.
  */
  *  number of device configurations. The descriptor is read out by the USB host when the enumeration
  *  process begins.
  */

-USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =

 {
        .Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
 
 {
        .Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
 


@@ -124,7 +85,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
  *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
  *  a configuration so that the host may correctly communicate with the USB device.
  */
  *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
  *  a configuration so that the host may correctly communicate with the USB device.
  */

-USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =

 {
        .Config =
                {
 {
        .Config =
                {


@@ -136,7 +97,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
                        .ConfigurationNumber    = 1,
                        .ConfigurationStrIndex  = NO_DESCRIPTOR,
 
                        .ConfigurationNumber    = 1,
                        .ConfigurationStrIndex  = NO_DESCRIPTOR,
 

-                       .ConfigAttributes       = USB_CONFIG_ATTR_BUSPOWERED,
+                       .ConfigAttributes       = USB_CONFIG_ATTR_RESERVED,

 
                        .MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
                },
 
                        .MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
                },


@@ -161,20 +122,20 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
                {
                        .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
 
                {
                        .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
 

-                       .EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_IN | MASS_STORAGE_IN_EPNUM),
+                       .EndpointAddress        = MASS_STORAGE_IN_EPADDR,

                        .Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
                        .EndpointSize           = MASS_STORAGE_IO_EPSIZE,
                        .Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
                        .EndpointSize           = MASS_STORAGE_IO_EPSIZE,

-                       .PollingIntervalMS      = 0x01
+                       .PollingIntervalMS      = 0x05

                },
 
        .MS_DataOutEndpoint =
                {
                        .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
 
                },
 
        .MS_DataOutEndpoint =
                {
                        .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
 

-                       .EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_OUT | MASS_STORAGE_OUT_EPNUM),
+                       .EndpointAddress        = MASS_STORAGE_OUT_EPADDR,

                        .Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
                        .EndpointSize           = MASS_STORAGE_IO_EPSIZE,
                        .Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
                        .EndpointSize           = MASS_STORAGE_IO_EPSIZE,

-                       .PollingIntervalMS      = 0x01
+                       .PollingIntervalMS      = 0x05

                },
 
        .HID_KeyboardInterface =
                },
 
        .HID_KeyboardInterface =


@@ -208,10 +169,10 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
                {
                        .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
 
                {
                        .Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
 

-                       .EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_IN | KEYBOARD_EPNUM),
+                       .EndpointAddress        = KEYBOARD_EPADDR,

                        .Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
                        .EndpointSize           = KEYBOARD_EPSIZE,
                        .Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
                        .EndpointSize           = KEYBOARD_EPSIZE,

-                       .PollingIntervalMS      = 0x01
+                       .PollingIntervalMS      = 0x05

                },
 };
 
                },
 };
 


@@ -219,7 +180,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
  *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
  *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
  */
  *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
  *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
  */

-USB_Descriptor_String_t PROGMEM LanguageString =
+const USB_Descriptor_String_t PROGMEM LanguageString =

 {
        .Header                 = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
 
 {
        .Header                 = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
 


@@ -230,7 +191,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
  *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
  *  Descriptor.
  */
  *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
  *  Descriptor.
  */

-USB_Descriptor_String_t PROGMEM ManufacturerString =
+const USB_Descriptor_String_t PROGMEM ManufacturerString =

 {
        .Header                 = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
 
 {
        .Header                 = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
 


@@ -241,7 +202,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
  *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
  *  Descriptor.
  */
  *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
  *  Descriptor.
  */

-USB_Descriptor_String_t PROGMEM ProductString =
+const USB_Descriptor_String_t PROGMEM ProductString =

 {
        .Header                 = {.Size = USB_STRING_LEN(35), .Type = DTYPE_String},
 
 {
        .Header                 = {.Size = USB_STRING_LEN(35), .Type = DTYPE_String},