Be doubly-certain that the incomming CDC class driver's endpoint/pipe is flushed...

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / XPROG / XPROGTarget.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
index 2b733d3..1406428 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
@@ -71,7 +71,7 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
                  return;\r
        \r
                /* Shift in the bit one less than the frame size in position, so that the start bit will eventually\r
                  return;\r
        \r
                /* Shift in the bit one less than the frame size in position, so that the start bit will eventually\r

-                * be discarded leaving the data to be byte-aligned for quick access */\r
+                * be discarded leaving the data to be byte-aligned for quick access (subtract 9 as we are ORing to the MSB) */\r

                if (BITBANG_PDIDATA_PIN & BITBANG_PDIDATA_MASK)\r
                  ((uint8_t*)&SoftUSART_Data)[1] |= (1 << (BITS_IN_USART_FRAME - 9));\r
 \r
                if (BITBANG_PDIDATA_PIN & BITBANG_PDIDATA_MASK)\r
                  ((uint8_t*)&SoftUSART_Data)[1] |= (1 << (BITS_IN_USART_FRAME - 9));\r
 \r


@@ -117,7 +117,7 @@ ISR(TIMER1_COMPB_vect, ISR_BLOCK)
                  return;\r
        \r
                /* Shift in the bit one less than the frame size in position, so that the start bit will eventually\r
                  return;\r
        \r
                /* Shift in the bit one less than the frame size in position, so that the start bit will eventually\r

-                * be discarded leaving the data to be byte-aligned for quick access */\r
+                * be discarded leaving the data to be byte-aligned for quick access (subtract 9 as we are ORing to the MSB) */\r

                if (BITBANG_TPIDATA_PIN & BITBANG_TPIDATA_MASK)\r
                 ((uint8_t*)&SoftUSART_Data)[1] |= (1 << (BITS_IN_USART_FRAME - 9));\r
 \r
                if (BITBANG_TPIDATA_PIN & BITBANG_TPIDATA_MASK)\r
                 ((uint8_t*)&SoftUSART_Data)[1] |= (1 << (BITS_IN_USART_FRAME - 9));\r
 \r


@@ -154,8 +154,7 @@ void XPROGTarget_EnableTargetPDI(void)
        \r
        /* Set DATA line high for at least 90ns to disable /RESET functionality */\r
        PORTD |= (1 << 3);\r
        \r
        /* Set DATA line high for at least 90ns to disable /RESET functionality */\r
        PORTD |= (1 << 3);\r

-       asm volatile ("NOP"::);\r
-       asm volatile ("NOP"::);\r
+       _delay_ms(1);\r

        \r
        /* Set up the synchronous USART for XMEGA communications - \r
           8 data bits, even parity, 2 stop bits */\r
        \r
        /* Set up the synchronous USART for XMEGA communications - \r
           8 data bits, even parity, 2 stop bits */\r


@@ -169,8 +168,7 @@ void XPROGTarget_EnableTargetPDI(void)
        \r
        /* Set DATA line high for at least 90ns to disable /RESET functionality */\r
        BITBANG_PDIDATA_PORT |= BITBANG_PDIDATA_MASK;\r
        \r
        /* Set DATA line high for at least 90ns to disable /RESET functionality */\r
        BITBANG_PDIDATA_PORT |= BITBANG_PDIDATA_MASK;\r

-       asm volatile ("NOP"::);\r
-       asm volatile ("NOP"::);\r
+       _delay_ms(1);\r

 \r
        /* Fire timer compare channel A ISR to manage the software USART */\r
        OCR1A   = BITS_BETWEEN_USART_CLOCKS;\r
 \r
        /* Fire timer compare channel A ISR to manage the software USART */\r
        OCR1A   = BITS_BETWEEN_USART_CLOCKS;\r


@@ -188,18 +186,17 @@ void XPROGTarget_EnableTargetTPI(void)
 {\r
        IsSending = false;\r
 \r
 {\r
        IsSending = false;\r
 \r

-       /* Set /RESET line low for at least 90ns to enable TPI functionality */\r
+       /* Set /RESET line low for at least 400ns to enable TPI functionality */\r

        AUX_LINE_DDR  |=  AUX_LINE_MASK;\r
        AUX_LINE_PORT &= ~AUX_LINE_MASK;\r
        AUX_LINE_DDR  |=  AUX_LINE_MASK;\r
        AUX_LINE_PORT &= ~AUX_LINE_MASK;\r

-       asm volatile ("NOP"::);\r
-       asm volatile ("NOP"::);\r
+       _delay_ms(1);\r

 \r
 #if defined(XPROG_VIA_HARDWARE_USART)\r
        /* Set Tx and XCK as outputs, Rx as input */\r
        DDRD |=  (1 << 5) | (1 << 3);\r
        DDRD &= ~(1 << 2);\r
                \r
 \r
 #if defined(XPROG_VIA_HARDWARE_USART)\r
        /* Set Tx and XCK as outputs, Rx as input */\r
        DDRD |=  (1 << 5) | (1 << 3);\r
        DDRD &= ~(1 << 2);\r
                \r

-       /* Set up the synchronous USART for XMEGA communications - \r
+       /* Set up the synchronous USART for TINY communications - \r

           8 data bits, even parity, 2 stop bits */\r
        UBRR1  = (F_CPU / 500000UL);\r
        UCSR1B = (1 << TXEN1);\r
           8 data bits, even parity, 2 stop bits */\r
        UBRR1  = (F_CPU / 500000UL);\r
        UCSR1B = (1 << TXEN1);\r


@@ -230,6 +227,10 @@ void XPROGTarget_DisableTargetPDI(void)
        XPROGTarget_SetRxMode();\r
 \r
 #if defined(XPROG_VIA_HARDWARE_USART)\r
        XPROGTarget_SetRxMode();\r
 \r
 #if defined(XPROG_VIA_HARDWARE_USART)\r

+       /* Set /RESET high for a one millisecond to ensure target device is restarted */\r
+       PORTD |= (1 << 5);\r
+       _delay_ms(1);\r
+\r

        /* Turn off receiver and transmitter of the USART, clear settings */\r
        UCSR1A |= (1 << TXC1) | (1 << RXC1);\r
        UCSR1B  = 0;\r
        /* Turn off receiver and transmitter of the USART, clear settings */\r
        UCSR1A |= (1 << TXC1) | (1 << RXC1);\r
        UCSR1B  = 0;\r


@@ -239,6 +240,10 @@ void XPROGTarget_DisableTargetPDI(void)
        DDRD  &= ~((1 << 5) | (1 << 3));\r
        PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));\r
 #else\r
        DDRD  &= ~((1 << 5) | (1 << 3));\r
        PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));\r
 #else\r

+       /* Set /RESET high for a one millisecond to ensure target device is restarted */\r
+       BITBANG_PDICLOCK_PORT |= BITBANG_PDICLOCK_MASK;\r
+       _delay_ms(1);\r
+\r

        /* Set DATA and CLOCK lines to inputs */\r
        BITBANG_PDIDATA_DDR   &= ~BITBANG_PDIDATA_MASK;\r
        BITBANG_PDICLOCK_DDR  &= ~BITBANG_PDICLOCK_MASK;\r
        /* Set DATA and CLOCK lines to inputs */\r
        BITBANG_PDIDATA_DDR   &= ~BITBANG_PDIDATA_MASK;\r
        BITBANG_PDICLOCK_DDR  &= ~BITBANG_PDICLOCK_MASK;\r


@@ -299,7 +304,7 @@ void XPROGTarget_SendByte(const uint8_t Byte)
        uint16_t NewUSARTData = ((1 << 11) | (1 << 10) | (0 << 9) | ((uint16_t)Byte << 1) | (0 << 0));\r
 \r
        /* Compute Even parity - while a bit is still set, chop off lowest bit and toggle parity bit */\r
        uint16_t NewUSARTData = ((1 << 11) | (1 << 10) | (0 << 9) | ((uint16_t)Byte << 1) | (0 << 0));\r
 \r
        /* Compute Even parity - while a bit is still set, chop off lowest bit and toggle parity bit */\r

-       uint8_t ParityData    = Byte;\r
+       uint8_t ParityData = Byte;\r

        while (ParityData)\r
        {\r
                NewUSARTData ^= (1 << 9);\r
        while (ParityData)\r
        {\r
                NewUSARTData ^= (1 << 9);\r