Fixed SerialStream driver not setting stdin to the created serial stream.

[pub/USBasp.git] / Projects / AVRISP-MKII / AVRISP.txt

diff --git a/Projects/AVRISP-MKII/AVRISP.txt b/Projects/AVRISP-MKII/AVRISP.txt
index e67c83e..7688f7e 100644 (file)
--- a/Projects/AVRISP-MKII/AVRISP.txt
+++ b/Projects/AVRISP-MKII/AVRISP.txt
@@ -123,7 +123,7 @@
  *    <td><b>PDI 6 Pin Layout:</b></td>\r
  *   </tr>\r
  *   <tr>\r
- *    <td>MISO</td>\r
+ *    <td>MISO <b><sup>2</sup></b></td>\r
  *    <td>DATA</td>\r
  *    <td>1</td>\r
  *   </tr>\r
@@ -143,7 +143,7 @@
  *    <td>4</td>\r
  *   </tr>\r
  *   <tr>\r
- *    <td>PORTx.y <b><sup>2</sup></b></td>\r
+ *    <td>PORTx.y <b><sup>2, 3</sup></b></td>\r
  *    <td>CLOCK</td>\r
  *    <td>5</td>\r
  *   </tr>\r
@@ -154,9 +154,10 @@
  *   </tr>\r
  *  </table>\r
  *\r
- *  <b><sup>1</sup></b> <i>When XPROG_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together\r
- *                         via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i> \n\r
- *  <b><sup>2</sup></b> <i>See AUX line related tokens in the \ref SSec_Options section</i>\r
+ *  <b><sup>1</sup></b> <i>Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only</i> \n\r
+ *  <b><sup>2</sup></b> <i>When XPROG_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together\r
+ *                         via a pair of 220 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i> \n\r
+ *  <b><sup>3</sup></b> <i>See AUX line related tokens in the \ref SSec_Options section</i>\r
  *\r
  *  \section Sec_TPI TPI Connections\r
  *  Connections to the device for TPI programming<b><sup>1</sup></b> (when enabled):\r
@@ -168,7 +169,7 @@
  *    <td><b>TPI 6 Pin Layout:</b></td>\r
  *   </tr>\r
  *   <tr>\r
- *    <td>MISO</td>\r
+ *    <td>MISO <b><sup>2</sup></b></td>\r
  *    <td>DATA</td>\r
  *    <td>1</td>\r
  *   </tr>\r
@@ -178,7 +179,7 @@
  *    <td>2</td>\r
  *   </tr>\r
  *   <tr>\r
- *    <td>SCLK</td>\r
+ *    <td>SCLK <b><sup>2</sup></b></td>\r
  *    <td>CLOCK</td>\r
  *    <td>3</td>\r
  *   </tr>\r
@@ -188,7 +189,7 @@
  *    <td>4</td>\r
  *   </tr>\r
  *   <tr>\r
- *    <td>PORTx.y <b><sup>2</sup></b></td>\r
+ *    <td>PORTx.y <b><sup>3</sup></b></td>\r
  *    <td>/RESET</td>\r
  *    <td>5</td>\r
  *   </tr>\r
@@ -199,9 +200,10 @@
  *   </tr>\r
  *  </table>\r
  *\r
- *  <b><sup>1</sup></b> <i>When XPROG_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together\r
- *                         via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i> \n\r
- *  <b><sup>2</sup></b> <i>See AUX line related tokens in the \ref SSec_Options section</i>\r
+ *  <b><sup>1</sup></b> <i>Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only</i> \n\r
+ *  <b><sup>2</sup></b> <i>When XPROG_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together\r
+ *                         via a pair of 220 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i> \n\r
+ *  <b><sup>3</sup></b> <i>See AUX line related tokens in the \ref SSec_Options section</i>\r
  *\r
  *  \section SSec_Options Project Options\r
  *\r