Make twi capitalization match.

[pub/USBasp.git] / LUFA / Drivers / Peripheral / AVR8 / SPI_AVR8.h

diff --git a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
index 5674770..1b8f53e 100644 (file)
--- a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2012.
+     Copyright (C) Dean Camera, 2014.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
-  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -40,7 +40,7 @@
 /** \ingroup Group_SPI
  *  \defgroup Group_SPI_AVR8 SPI Peripheral Driver (AVR8)
  *
- *  \section Sec_ModDescription Module Description
+ *  \section Sec_SPI_AVR8_ModDescription Module Description
  *  Driver for the hardware SPI port available on most 8-bit AVR microcontroller models. This
  *  module provides an easy to use driver for the setup and transfer of data over the
  *  AVR's SPI port.
@@ -48,7 +48,7 @@
  *  \note This file should not be included directly. It is automatically included as needed by the SPI driver
  *        dispatch header located in LUFA/Drivers/Peripheral/SPI.h.
  *
- *  \section Sec_ExampleUsage Example Usage
+ *  \section Sec_SPI_AVR8_ExampleUsage Example Usage
  *  The following snippet is an example of how this module may be used within a typical
  *  application.
  *
@@ -56,17 +56,17 @@
  *      // Initialize the SPI driver before first use
  *      SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
  *               SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
- *      
+ *
  *      // Send several bytes, ignoring the returned data
  *      SPI_SendByte(0x01);
  *      SPI_SendByte(0x02);
  *      SPI_SendByte(0x03);
- *      
+ *
  *      // Receive several bytes, sending a dummy 0x00 byte each time
  *      uint8_t Byte1 = SPI_ReceiveByte();
  *      uint8_t Byte2 = SPI_ReceiveByte();
  *      uint8_t Byte3 = SPI_ReceiveByte();
- *      
+ *
  *      // Send a byte, and store the received byte from the same transaction
  *      uint8_t ResponseByte = SPI_TransferByte(0xDC);
  *  \endcode
@@ -165,6 +165,7 @@
                         *  \param[in] SPIOptions  SPI Options, a mask consisting of one of each of the \c SPI_SPEED_*,
                         *                         \c SPI_SCK_*, \c SPI_SAMPLE_*, \c SPI_ORDER_* and \c SPI_MODE_* masks.
                         */
+                       static inline void SPI_Init(const uint8_t SPIOptions);
                        static inline void SPI_Init(const uint8_t SPIOptions)
                        {
                                /* Prevent high rise times on PB.0 (/SS) from forcing a change to SPI slave mode */
@@ -187,6 +188,7 @@
                        }
 
                        /** Turns off the SPI driver, disabling and returning used hardware to their default configuration. */
+                       static inline void SPI_Disable(void);
                        static inline void SPI_Disable(void)
                        {
                                DDRB  &= ~((1 << 1) | (1 << 2));