CCID: Add support for PC-to-Reader XfrBlock message

[pub/USBasp.git] / Demos / Device / ClassDriver / VirtualSerialMouse / VirtualSerialMouse.c

diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c
index 3a952f1..0eeacdf 100644 (file)
--- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c
+++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2012.
+     Copyright (C) Dean Camera, 2018.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
-  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2018  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -44,7 +44,7 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
        {
                .Config =
                        {
-                               .ControlInterfaceNumber         = 0,
+                               .ControlInterfaceNumber         = INTERFACE_ID_CDC_CCI,
                                .DataINEndpoint                 =
                                        {
                                                .Address                = CDC_TX_EPADDR,
@@ -77,7 +77,7 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface =
        {
                .Config =
                        {
-                               .InterfaceNumber                = 2,
+                               .InterfaceNumber                = INTERFACE_ID_Mouse,
                                .ReportINEndpoint               =
                                        {
                                                .Address                = MOUSE_EPADDR,
@@ -116,12 +116,24 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
        /* Disable watchdog if enabled by bootloader/fuses */
        MCUSR &= ~(1 << WDRF);
        wdt_disable();
 
        /* Disable clock division */
        clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+       /* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+       XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+       XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+       /* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+       XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+       XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+       PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
 
        /* Hardware Initialization */
        Joystick_Init();
@@ -203,7 +215,7 @@ void EVENT_USB_Device_StartOfFrame(void)
  *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
  *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
  *
- *  \return Boolean true to force the sending of the report, false to let the library determine if it needs to be sent
+ *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
  */
 bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
                                          uint8_t* const ReportID,
@@ -253,3 +265,20 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI
        // Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports
 }
 
+/** CDC class driver callback function the processing of changes to the virtual
+ *  control lines sent from the host..
+ *
+ *  \param[in] CDCInterfaceInfo  Pointer to the CDC class interface configuration structure being referenced
+ */
+void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t *const CDCInterfaceInfo)
+{
+       /* You can get changes to the virtual CDC lines in this callback; a common
+          use-case is to use the Data Terminal Ready (DTR) flag to enable and
+          disable CDC communications in your application when set to avoid the
+          application blocking while waiting for a host to become ready and read
+          in the pending data from the USB endpoints.
+       */
+       bool HostReady = (CDCInterfaceInfo->State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR) != 0;
+
+       (void)HostReady;
+}