/*
LUFA Library
Copyright (C) Dean Camera, 2010.
-
+
dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
+ www.lufa-lib.org
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
- Permission to use, copy, modify, distribute, and sell this
+ Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
+ without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
#include <avr/pgmspace.h>
#include <avr/eeprom.h>
- #include "../../../Common/Common.h"
+ #include "../../../Common/Common.h"
#include "../HighLevel/StdDescriptors.h"
#include "USBInterrupt.h"
#include "Endpoint.h"
#if !defined(__INCLUDE_FROM_USB_DRIVER)
#error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
#endif
-
+
/* Public Interface - May be used in end-application: */
/* Macros: */
+ /** \name USB Device Mode Option Masks */
+ //@{
#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)
/** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
* USB interface should be initialized in low speed (1.5Mb/s) mode.
*/
#define USB_DEVICE_OPT_LOWSPEED (1 << 0)
#endif
-
+
/** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
* USB interface should be initialized in full speed (12Mb/s) mode.
*/
#define USB_DEVICE_OPT_FULLSPEED (0 << 0)
-
+ //@}
+
/* Function Prototypes: */
/** Sends a Remote Wakeup request to the host. This signals to the host that the device should
* be taken out of suspended mode, and communications should resume.
* issued if the host is currently allowing remote wakeup events from the device (i.e.,
* the \ref USB_RemoteWakeupEnabled flag is set). When the NO_DEVICE_REMOTE_WAKEUP compile
* time option is used, this macro is unavailable.
- * \n
+ * \n\n
*
* \note The USB clock must be running for this function to operate. If the stack is initialized with
* the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running
* \see \ref Group_Descriptors for more information on the RMWAKEUP feature and device descriptors.
*/
void USB_Device_SendRemoteWakeup(void);
-
+
/* Type Defines: */
enum USB_Device_States_t
{
* resumed.
*/
};
-
+
/* Inline Functions: */
- /** Enables the device mode Start Of Frame events. When enabled, this causes the
- * \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,
- * at the start of each USB frame when enumerated in device mode.
- */
- static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_EnableSOFEvents(void)
- {
- USB_INT_Enable(USB_INT_SOFI);
- }
-
- /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the
- * \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode.
+ /** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host)
+ * the frame number is incremented by one.
*/
- static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_DisableSOFEvents(void)
+ static inline uint16_t USB_Device_GetFrameNumber(void)
{
- USB_INT_Disable(USB_INT_SOFI);
+ return UDFNUM;
}
-
+
+ #if !defined(NO_SOF_EVENTS)
+ /** Enables the device mode Start Of Frame events. When enabled, this causes the
+ * \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,
+ * at the start of each USB frame when enumerated in device mode.
+ *
+ * \note Not available when the NO_SOF_EVENTS compile time token is defined.
+ */
+ static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE;
+ static inline void USB_Device_EnableSOFEvents(void)
+ {
+ USB_INT_Enable(USB_INT_SOFI);
+ }
+
+ /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the
+ * \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode.
+ *
+ * \note Not available when the NO_SOF_EVENTS compile time token is defined.
+ */
+ static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE;
+ static inline void USB_Device_DisableSOFEvents(void)
+ {
+ USB_INT_Disable(USB_INT_SOFI);
+ }
+ #endif
+
/* Function Prototypes: */
/** Function to retrieve a given descriptor's size and memory location from the given descriptor type value,
- * index and language ID. This function MUST be overridden in the user application (added with full, identical
+ * index and language ID. This function MUST be overridden in the user application (added with full, identical
* prototype and name so that the library can call it to retrieve descriptor data.
*
- * \param[in] wValue The type of the descriptor to retrieve in the upper byte, and the index in the
+ * \param[in] wValue The type of the descriptor to retrieve in the upper byte, and the index in the
* lower byte (when more than one descriptor of the given type exists, such as the
* case of string descriptors). The type may be one of the standard types defined
* in the DescriptorTypes_t enum, or may be a class-specific descriptor type value.
*
* \note By default, the library expects all descriptors to be located in flash memory via the PROGMEM attribute.
* If descriptors should be located in RAM or EEPROM instead (to speed up access in the case of RAM, or to
- * allow the descriptors to be changed dynamically at runtime) either the USE_RAM_DESCRIPTORS or the
+ * allow the descriptors to be changed dynamically at runtime) either the USE_RAM_DESCRIPTORS or the
* USE_EEPROM_DESCRIPTORS tokens may be defined in the project makefile and passed to the compiler by the -D
* switch.
*
*/
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
- void** const DescriptorAddress
+ const void** const DescriptorAddress
#if !defined(USE_FLASH_DESCRIPTORS) && !defined(USE_EEPROM_DESCRIPTORS) && !defined(USE_RAM_DESCRIPTORS)
, uint8_t* MemoryAddressSpace
#endif
{
UDCON |= (1 << LSM);
}
-
+
static inline void USB_Device_SetFullSpeed(void) ATTR_ALWAYS_INLINE;
static inline void USB_Device_SetFullSpeed(void)
{
UDCON &= ~(1 << LSM);
}
#endif
-
+
static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE;
static inline void USB_Device_SetDeviceAddress(const uint8_t Address)
{
- UDADDR = ((1 << ADDEN) | (Address & 0x7F));
- }
+ UDADDR = ((UDADDR & (1 << ADDEN)) | (Address & 0x7F));
+ UDADDR |= (1 << ADDEN);
+ }
+
+ static inline bool USB_Device_IsAddressSet(void) ATTR_ALWAYS_INLINE;
+ static inline bool USB_Device_IsAddressSet(void)
+ {
+ return (UDADDR & (1 << ADDEN));
+ }
#endif
#endif
/** @} */
+
projects / pub / USBasp.git / blobdiff