Fix incorrect configuration in the ClassDriver AudioOutput demo.

[pub/USBasp.git] / Demos / OTG / TestApp / TestApp.txt

diff --git a/Demos/OTG/TestApp/TestApp.txt b/Demos/OTG/TestApp/TestApp.txt
index aef55b7..540a59c 100644 (file)
--- a/Demos/OTG/TestApp/TestApp.txt
+++ b/Demos/OTG/TestApp/TestApp.txt
@@ -36,25 +36,19 @@
  *  \section SSec_Description Project Description: \r
  *\r
  *  Test application. Demonstrates several aspects of the LUFA\r
  *  \section SSec_Description Project Description: \r
  *\r
  *  Test application. Demonstrates several aspects of the LUFA\r

- *  Library. On startup the current temperature will be printed\r
+ *  Library. On start-up the current temperature will be printed\r

  *  through the USART every 10 seconds, and the current joystick\r
  *  position will be indicated via the LEDs on the selected board.\r
  *  Pressing the HWB will initiate the USB subsystem, enumerating\r
  *  the device (which has <b>no actual functionality beyond\r
  *  enumeration as a device or as a host in this demo</b>, and serves\r
  *  through the USART every 10 seconds, and the current joystick\r
  *  position will be indicated via the LEDs on the selected board.\r
  *  Pressing the HWB will initiate the USB subsystem, enumerating\r
  *  the device (which has <b>no actual functionality beyond\r
  *  enumeration as a device or as a host in this demo</b>, and serves\r

- *  only to demonstrate the USB portion of the library). It will\r
- *  also suspend the joystick and temperature monitoring tasks.\r
+ *  only to demonstrate the USB portion of the library).\r

  * \r
  * \r

- *  Pressing the HWB a second time will turn off the USB system\r
- *  and resume the temperature printing task (but not the joystick\r
- *  monitoring task).\r
+ *  Pressing the HWB a second time will turn off the USB system.\r

  *\r
  *  When activated, the USB events will be printed through the\r
  *  serial USART.\r
  *\r
  *\r
  *  When activated, the USB events will be printed through the\r
  *  serial USART.\r
  *\r

- *  When the USB subsystem is activated, the board LEDs will show\r
- *  the current USB status.\r
- *\r

  *  \section SSec_Options Project Options\r
  *\r
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.\r
  *  \section SSec_Options Project Options\r
  *\r
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.\r


@@ -66,4 +60,4 @@
  *    </td>\r
  *   </tr>\r
  *  </table>\r
  *    </td>\r
  *   </tr>\r
  *  </table>\r

- */
\ No newline at end of file
+ */\r