Rename PDIProtocol.c/.h to XPROGProtocol.c/.h as it will now handle both TPI and...

[pub/USBasp.git] / Projects / AVRISP / Lib / V2Protocol.h

diff --git a/Projects/AVRISP/Lib/V2Protocol.h b/Projects/AVRISP/Lib/V2Protocol.h
index 2cc7fc4..8cc4c3c 100644 (file)
--- a/Projects/AVRISP/Lib/V2Protocol.h
+++ b/Projects/AVRISP/Lib/V2Protocol.h
@@ -37,59 +37,44 @@
 #define _V2_PROTOCOL_
 
        /* Includes: */
 #define _V2_PROTOCOL_
 
        /* Includes: */

-               #include <avr/io.h>
-

                #include <LUFA/Drivers/USB/USB.h>
                #include <LUFA/Drivers/USB/USB.h>

+               #include <LUFA/Drivers/Peripheral/SPI.h>\r
+               #include <LUFA/Drivers/Peripheral/Serial.h>\r
+               \r
+               #include "../Descriptors.h"
+               #include "V2ProtocolConstants.h"\r
+               #include "V2ProtocolParams.h"
+               #include "ISP/ISPProtocol.h"\r
+               #include "XPROG/XPROGProtocol.h"\r
+\r
+       /* Preprocessor Checks: */\r
+               #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))\r
+                       #undef ENABLE_ISP_PROTOCOL\r
+                       #undef ENABLE_TPI_PROTOCOL\r
+                       \r
+                       #if !defined(ENABLE_PDI_PROTOCOL)\r
+                               #define ENABLE_PDI_PROTOCOL\r
+                       #endif\r
+               #endif\r

 
 

-       /* Macros: */
-               #define CMD_SIGN_ON                 0x01
-               #define CMD_SET_PARAMETER           0x02
-               #define CMD_GET_PARAMETER           0x03
-               #define CMD_OSCCAL                  0x05
-               #define CMD_LOAD_ADDRESS            0x06
-               #define CMD_FIRMWARE_UPGRADE        0x07
-               #define CMD_RESET_PROTECTION        0x0A
-               #define CMD_ENTER_PROGMODE_ISP      0x10
-               #define CMD_LEAVE_PROGMODE_ISP      0x11
-               #define CMD_CHIP_ERASE_ISP          0x12
-               #define CMD_PROGRAM_FLASH_ISP       0x13
-               #define CMD_READ_FLASH_ISP          0x14
-               #define CMD_PROGRAM_EEPROM_ISP      0x15
-               #define CMD_READ_EEPROM_ISP         0x16
-               #define CMD_PROGRAM_FUSE_ISP        0x17
-               #define CMD_READ_FUSE_ISP           0x18
-               #define CMD_PROGRAM_LOCK_ISP        0x19
-               #define CMD_READ_LOCK_ISP           0x1A
-               #define CMD_READ_SIGNATURE_ISP      0x1B
-               #define CMD_READ_OSCCAL_ISP         0x1C
-               #define CMD_SPI_MULTI               0x1D
-
-               #define STATUS_CMD_OK               0x00
-               #define STATUS_CMD_TOUT             0x80
-               #define STATUS_RDY_BSY_TOUT         0x81
-               #define STATUS_SET_PARAM_MISSING    0x82
-               #define STATUS_CMD_FAILED           0xC0
-               #define STATUS_CMD_UNKNOWN          0xC9
-               #define STATUS_ISP_READY            0x00
-               #define STATUS_CONN_FAIL_MOSI       0x01
-               #define STATUS_CONN_FAIL_RST        0x02
-               #define STATUS_CONN_FAIL_SCK        0x04
-               #define STATUS_TGT_NOT_DETECTED     0x10
-               #define STATUS_TGT_REVERSE_INSERTED 0x20
-
-               #define PARAM_BUILD_NUMBER_LOW      0x80
-               #define PARAM_BUILD_NUMBER_HIGH     0x81
-               #define PARAM_HW_VER                0x90
-               #define PARAM_SW_MAJOR              0x91
-               #define PARAM_SW_MINOR              0x92
-               #define PARAM_VTARGET               0x94
-               #define PARAM_SCK_DURATION          0x98
-               #define PARAM_RESET_POLARITY        0x9E
-               #define PARAM_STATUS_TGT_CONN       0xA1
-               #define PARAM_DISCHARGEDELAY        0xA4
-
-       /* Function Prototypes: */      
-               void V2Protocol_ProcessCommand(void);
+       /* Macros: */\r
+               /** Programmer ID string, returned to the host during the CMD_SIGN_ON command processing */
+               #define PROGRAMMER_ID     "AVRISP_MK2"\r
+\r
+       /* External Variables: */\r
+               extern uint32_t CurrentAddress;\r
+               extern bool     MustSetAddress;\r
+\r
+       /* Function Prototypes: */\r
+               void V2Protocol_ProcessCommand(void);\r
+               \r
+               #if defined(INCLUDE_FROM_V2PROTOCOL_C)\r
+                       static void V2Protocol_UnknownCommand(uint8_t V2Command);\r
+                       static void V2Protocol_SignOn(void);\r
+                       static void V2Protocol_GetSetParam(uint8_t V2Command);\r
+                       static void V2Protocol_ResetProtection(void);\r
+                       static void V2Protocol_LoadAddress(void);\r
+               #endif

 
 #endif
 
 
 #endif